Lumens Dual HDL300 AV For Large Rooms User Guide
- September 13, 2024
- Lumens
Table of Contents
Dual HDL300 AV For Large Rooms
“`html
Product Specifications
- Product Name: Nureva Dual HDL300
- Hardware Connections:
- Microphone HDL300 connect module
- CamConnect Processor (AI-BOX1)
- Display
- Meeting Room PC (Windows OS)
- Lumens PTZ Camera
- Cables Included: Cat5e cable, HDMI cable, USB 2.0 cable
Product Usage Instructions
1. Hardware Connections
Connect the Nureva Dual HDL300 components as follows:
-
Connect the Microphone HDL300 and CamConnect Processor to the
Display. -
Connect the Meeting Room PC to the Display.
-
Connect the Lumens PTZ Camera to the system.
2. Install Nureva Console Client
-
Download Nureva Console Client: Visit the
following link to download the client:
Console Client Download -
Set up Nureva Console Client:
-
After installation, launch the Console client app.
-
Connect the Nureva connect module to the PC using a USB
cable. -
Set up Nureva Dual HDL300:
-
Pull the vertical scroll bar of the Console client down.
-
Go to ‘Integrations’ and expand ‘Local integrations’
option.
3. Set Angle Positions
Adjust the angle positions of the Nureva Dual HDL300 as needed
within the range of -70 to +70 degrees, with 0 degrees being the
center point.
Frequently Asked Questions (FAQ)
Q: What is the maximum Azimuth Angle range for the Nureva Dual
HDL300?
A: The maximum Azimuth Angle range is from -70 to +70 degrees,
with 0 degrees being the center point.
“`
Nureva Dual HDL300 Settings Guide
Nureva Dual HDL300 1. Hardware Connections
Copyright © Lumens. All rights reserved.
1.1 Hardware Connections
Cable define Cat5e HDMI cable USB 2.0 cable
Nureva Dual HDL300 Microphone HDL300 connect module
CamConnect Processor (AI-BOX1)
Display
Meeting Room PC (Windows OS)
Display
Lumens PTZ Camera
Copyright © Lumens. All rights reserved.
Nureva Dual HDL300 2. Install Nureva Console client
Copyright © Lumens. All rights reserved.
2.1 Install Nureva Console client
Download [Console Client] https://support.nureva.com/97341-download/win-mac-
downloadnureva-console-client
Copyright © Lumens. All rights reserved.
2.2 Set up Nureva Console client
After Nureva Console client set up is completed, launch Console client app.
Connect the Nureva connect module to the PC with a USB cable.
Copyright © Lumens. All rights reserved.
2.3 Set up Nureva Dual HDL300
A
B C
A: Pull the vertical scroll bar of the Console client down B: Go to ‘Integrations’ C: Expan [Local integrations] option
Copyright © Lumens. All rights reserved.
2.4 Set up camera tracking integration
A
A: Enable [Network integration settings] B: Copy the IP address
B C
Copyright © Lumens. All rights reserved.
2.5 Set up camera tracking integration
A
Nureva: Dual HDL300
B
A: Add this address to [Device IP] in the CamConnect Pro
interface
B: Press [Apply] and the toggle [connect] bar to enabled Nureva’s default port
is 8931. Please confirm the port is permitted to connect with your PC.
Copyright © Lumens. All rights reserved.
Nureva Dual HDL300 3. Set Angle Positions
Copyright © Lumens. All rights reserved.
3.1 Set Angle Positions
70
-70
0
Note: “Azimuth Angle” maximum angle range is -70 to +70 degrees 0-degree is
the center point. The diagram above shows a sound source detected in the
0-degree region.
Copyright © Lumens. All rights reserved.