COOPER L908 Single Circuit Mini Joiner Instructions
- September 12, 2024
- Cooper
Table of Contents
COOPER L908 Single Circuit Mini Joiner Instructions
INSTALLATION INSTRUCTIONS
IMPORTANT SAFETY INSTRUCTIONS
- Read all of these installation instructions before installing the track system.
- Save These Instructions and refer to them when additions or changes in the track configuration are made.
- Disconnect electrical power before adding to or changing the configuration of the track.
- For use with L65X Series track systems only.
- Electrical ratings: 120V, 60Hz, 20A
Installation Instructions For L908 Mini-Connector
NOTE: Ground conductor must be on the same side of sections of track
being joined (polarity groove side).
Step1. Loosen set screw and remove dead end fitting.
Step2. Push connector into open ends of track.
Step3. Hand tighten lock screws. Do not overtighten.
Product Overview
Cooper Lighting Solutions
1121 Highway 74 South
Peachtree City, GA 30269
P: 770-486-4800
www.cooperlighting.com
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>