prolink GK-6002MS Mechanical Gaming Keyboard User Guide

prolink GK-6002MS Mechanical Gaming Keyboard

Package Contents

• Applicable for GK-6002MS hot-swap version only

Overview

Side View Botom View

1. USB-C port

2. LED on/off switch
   Front View F n shortcuts****

3. Fn + (ESC) Restore factory default (press and hold for 3 – 5 seconds)

4. Fn + (1 – 3) Lighting profile 1 – 3

5. Fn + (4) Media player

6. Fn + (5) Play/ Pause

7. Fn + (6) Stop

8. Fn + (7) Calculator

9. Fn + (8) My Computer

10. Fn + (9) Mail

11. Fn + (0) Search

12.  Fn +(-_)Mute

13. Fn + ([() Print Screen

14. Fn + (]}) Scroll Lock

15. Fn + (Pg. Up) Increase Volume

16. Fn + (Pg. Dn) Decrease Volume

17. Fn + (•” ) Insert

18. Fn + ( /?) End

19. Fn + ( ;: ) Pause Break

20. Fn + ( .> ) Home

21. Fn + ( L ) Lock/ unlock the keyboard (press and hold for 3 – 5 seconds). L Key will light up in White to indicate that keyboard is locked

22. Fn + (Win) Win lock

Features

• Plug & play
• 68 keys space-saving design
• RGB backlighting
• 12 preset lighting effects
• 3 customizable lighting profiles
• Outemu switches
• Detachable 1.75m USB-A to C braided cable
• Full N-key rollover (68 anti-ghosting keys)
• Durable double-injection keycaps
• 50 million keystrokes
• Windows lock function

Hardware Installation

How to change the mechanical switch

• Use the keycap puller to detach the keycaps
  

• Place the switch puller on the tiny tabs of each switch. Squeeze the  switch puller to press  the tabs in, allowing  you to pull the switch up to remove it from the keyboard
  

• Ensure the two copper pins of the switch are straightened before inserting into each slot. Align switch with the respective slots and  push in gently
  

• Check if each switch is properly secured before  reattaching the keycap
  

LED Illumination (Keyboard)

• On/Off LED
  Switch on/ off RGB lighting
  

• Toggle between 12 preset lighting effects
  Basic Glow, Snake, Touch to Glow, RGB Spectrum, Linear, Rainbow Wave, Strobe, Waterfall, Ripple, Inwards Wave, Mystical and Static
  

• Toggle between 7 LED colours
  Turquoise, Red, Green, Blue, Pink, Yellow and White (applicable for single- colour lighting modes only)
  

• Adjust LED brightness
  Increase/ decrease lighting intensity
  

• Adjust backlight speed
  Increase/ decrease dynamic lighting movement
  

Customize lighting profiles

Design up to 3 sets of static lighting profiles.

1. Start creating by clicking on Fn + \. Numeric 1, 2 اnd 3 will start flashing
   

2. Select any of the flashing Numeric keys to customize desired lighting pattern. Change a key’s colour by tapping repetitively to cycle through the colour spectrum
   

3. Save your configuration and exit. Repeat above step to customize other two keys
   

4. Launch your customized lighting profiles 1, 2, or 3
   

5. Press and hold 3 – 5 seconds to restore factory default
   

Anti-Ghosting Keys

• N-key rollover (NKRO) enables each keypress to be correctly detected, regardless of the number of keys being pressed simultaneously.
• This prevents “ghosting”, where certain keystrokes may not be registered when two or more keys are pressed together.
  

Key Mapping

Transcoding-1

• To activate
  Press and hold for 3 – 5 seconds. Alt key will light up in White
  
  

• To deactivate
  Press and hold for 3 – 5 seconds. LED of Alt key will return to the current lighting effect

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>