Aerpro SWTO2C Steering Wheel Control Interface To Suit Toyota Vehicles User Guide
- September 9, 2024
- Aerpro
Table of Contents
- Aerpro SWTO2C Steering Wheel Control Interface To Suit Toyota Vehicles
- Product Usage Instructions
- Frequently Asked Questions
- VEHICLE APPLICATION
- KEY FEATURES
- PRIOR TO INSTALLATION
- WIRING KEY
- DIPSWITCH CONFIGURATION
- SWC INTERFACE
- CONNECTION GUIDE
- INSTALLATION
- STEERING WHEEL CONTROL CONFIGURATION
- BUTTON REMAPPING
- CONNECTION DIAGRAM
- Documents / Resources
Aerpro SWTO2C Steering Wheel Control Interface To Suit Toyota Vehicles
Specifications
-
Product Name: Steering Wheel Control Interface for Toyota Vehicles
-
Model Number: SWTO2C
-
Compatible Vehicles:
-
* AURION 2006-2011
- CAMRY 2006-2011
- COROLLA 2007-2011
- HILUX 2005-2011
-
-
Compatible with Fujitsu Ten or Matsushita original head units with a 20-pin connector
-
Not compatible with factory OEM amplified or factory upgraded systems
Product Usage Instructions
Installation Guide
The SWTO2C allows for the retention of steering wheel controls and other features when installing an aftermarket unit into the vehicle. Follow the steps below for installation:
- Read the manual carefully to understand the installation process.
- Choose a dry location free from heat sources for installation.
- Use the correct tools to prevent damage to the vehicle or the product.
- Disconnect the negative battery terminal and remove the key from the ignition before installation.
- Refer to the provided table for dipswitch settings to ensure proper configuration.
ISO Connector Wiring Key
Wire Color | Description |
---|---|
Purple | Right Rear Speaker + |
Outputs & Ratings
-
* Purple: Right Rear Speaker +
- Purple/Black: Right Rear Speaker –
Frequently Asked Questions
- Q: Is this interface compatible with all Toyota vehicles?
- A: The interface is designed to work with specific Toyota models listed in the user manual. It is not compatible with all Toyota vehicles.
- Q: What should I do if I encounter issues during installation?
- A: If you face any difficulties during installation, please refer to the manual for troubleshooting steps. If problems persist, contact customer support for assistance.
The SWTO2C allows for the retention of the steering wheel controls as well as other vital features when installing an aftermarket unit into the vehicle. This interface features selectable dipswitches for dedicated applications, simply refer to the provided table for the correct configuration ensuring seamless integration
VEHICLE APPLICATION
To Suit TOYOTA
- AURION 2006-2011
- CAMRY 2006-2011
- COROLLA 2007-2011
- HILUX 2005-2011
- KLUGER 2007-2011
- LANDCRUISER 200 SERIES 2007-2011
- PRADO 120 SERIES 2003-2009
- PRADO 150 SERIES 2009-2011
- PRIUS 2004-2008
- PRIUS 2009-2011
- TUNDRA 2007-2011
- YARIS (VITZ) 2005-2011
- HIACE 2004-2011
- FJ CRUISER 2011 – 2011
- TARAGO (ESTIMA) 2011
- BLADE 2006-2011
- RUKUS (RUMION) 2010-2011
- RAV4 2006-2011
FOR VEHICLES WITH FUJITSU TEN OR MATSUSHITA ORIGINAL HEADUNITS AND 20 PIN CONNECTORS. NOT COMPATIBLE WITH FACTORY OEM AMPLIFIED OR FACTORY UPGRADED SYSTEMS.
KEY FEATURES
- RETAIN STEERING WHEEL CONTROL FUNCTIONALITY
- REPLACE FACTORY RADIO
- SOFTWARE UPDATEABLE
- REMAPPABLE BUTTONS
PRIOR TO INSTALLATION
Installation requires a certain level of technical knowledge. Prior to installation, it is important to read the manual. Select a location for installation that is dry and free from heat sources. It is essential to use the correct tools during installation to prevent any damage to the vehicle or the product itself. Please note that we cannot be held liable for any issues arising from improper installation. Before proceeding with installation, disconnect the negative battery terminal and ensure the key is removed from the ignition.
WIRING KEY
ISO CONNECTOR WIRING KEY
- Purple Right Rear Speaker +
- Purple/Black Right Rear Speaker –
- Green Left Rear Speaker +
- Green/Black Left Rear Speaker –
- Grey Right Front Speaker +
- Grey/Black Right Front Speaker –
- White Left Front Speaker +
- White/Black Left Front Speaker –
- Yellow Permanent 12V
- Black Ground
- Red Ignition 12V
- Orange Illumination
OUTPUTS & RATINGS
- Standby Current <3mA Operating Voltage 6V to 16V Operating Temperature -20C to 85C
*rated at 25 degrees Centigrade
DIPSWITCH CONFIGURATION
MANUFACTURER
| ****
SYSTEM
| DIPSWITCH CONFIGURATION| ****
CONNECTION
---|---|---|---
1| 2| 3| 4
RESERVED| NA| OFF| OFF| OFF| OFF| SOFTWARE UPDATE MODE
ALPINE| IR DATA| OFF| ON| OFF| OFF| MALE 3.5MM JACK
ANALOG SINGLE EXTEND| Analog| ON| ON| ON| ON| BROWN
SWC IR
ANALOG SINGLE WIRE| Analog| ON| ON| ON| OFF| BROWN SWC
IR
CLARION| IR DATA| ON| OFF| OFF| ON| MALE 3.5MM JACK
CUSTOM| IR DATA| ON| OFF| ON| OFF| HEAD UNIT DEPENDANT
GRUNDIG| IR DATA| OFF| ON| OFF| ON| BROWN SWC IR
JVC| IR DATA| OFF| OFF| ON| OFF| BROWN SWC IR
KENWOOD 1| IR DATA| ON| OFF| OFF| OFF| BROWN SWC IR
KENWOOD 2| IR DATA| ON| ON| OFF| OFF| BROWN SWC IR
KEY 1 / KEY 2| Analog| OFF| ON| ON| OFF| KEY1 / KEY 2 WIRES
KEY 1 / KEY 2 EXTEND| Analog| OFF| ON| ON| ON| KEY1 /
KEY 2 WIRES
PHILIPS| IR DATA| OFF| ON| OFF| ON| BROWN SWC IR
PIONEER 1| Analog| OFF| OFF| OFF| ON| MALE 3.5MM JACK
PIONEER 2 / AERPRO| Analog| OFF| OFF| ON| ON| MALE 3.5MM JACK
SONY| Analog| ON| OFF| ON| ON| MALE 3.5MM JACK
DIPSWITCH 5 & 6
Dipswitch 5 & 6 are reserved for vehicle-specific configuration
KEY1 and KEY2
| KEY1 and KEY2 are specifically tailored for analog learning mode-style
radios. Our SWC module is designed with a resistor chain that precisely
matches the required resistance for seamless compatibility with this type of
head unit.
---|---
KEY1 and KEY2 EXTEND
| This mode extends every button press to 2 seconds during the learning
process. However, with rolly wheel-designed steering wheel buttons, holding
for 2 seconds isn’t feasible. Our KEY1 and KEY2 extend feature addresses this
by automatically prolonging each press, simplifying head unit programming even
in such scenarios. Extend mode is not intended for normal use, it is only used
in the teaching process.
ANALOG SINGLE WIRE and ANALOG SINGLE
WIRE EXTEND
| This function operates similarly to KEY1 and KEY2 but transmits all unique values through the IR SWC single wire. This is crucial for compatibility with learning-style head units featuring only one learning input wire. To ensure compatibility, we’ve incorporated this feature into our steering wheel control interface, ensuring seamless operation across various head unit setups.
The Analog Extend mode functions identically to its counterpart within the KEY1 and KEY2 system but transmits through a single wire.
SWC INTERFACE
CONNECTION GUIDE
BEFORE INSTALLATION
Prior to installing the interface, it is essential to remove and disconnect the factory stereo. For guidance on this process, please refer to the vehicle owner’s manual/handbook or seek assistance from a professional.
SETTING THE DIPSWITCHES
This interface includes a set of dipswitches. Consult the dipswitch selection guide to select the appropriate configuration. To activate a dipswitch, press it downward into the ‘ON’ position. Refer to the diagram for an example of the ‘KENWOOD1’ dipswitch configuration.
INSTALLATION
- Take the interface, then connect the 16-PIN head unit connection lead and the 18-PIN steering wheel harness connectors to their respective ports.
- Connect the head unit connection lead to the steering wheel remote input on the rear side of the aftermarket stereo. Connection methods vary based on the stereo brand, utilising either a 3.5mm jack connector SWC IR wire or wired inputs KEY1 and KEY2. For specific connection guidance, refer to your aftermarket stereo’s installation manual if not clearly labelled on the stereo harness.
- Connect the power/speaker ISO connector from the interface to the corresponding power/speaker ISO connection on the aftermarket stereo. For aftermarket stereos lacking an ISO connector, refer to the “Wiring Key” on Page 2 for guidance on connecting wires. Certain interfaces may also include extra “flying” wires for additional functionalities such as parking brake trigger, reverse gear, and speed pulse. Further information on these wires is available in the “Flying Wire Wiring Key” section.
- Connect the vehicle-specific connectors from the interface harness to the corresponding connectors on the vehicle harness.
- Connect the flying wires on the harness to the rear of the stereo (iff applicable).
- Connect the antenna adapter to the vehicle’s existing connection at the rear of the aftermarket stereo.
- When installing an aftermarket reverse camera, connect the yellow RCA from the harness to the yellow RCA of the aftermarket camera. (If supported by the interface and vehicle)
- When installing a DAB antenna, ensure to connect the DAB aerial connector to the rear of the new stereo.
- After connecting all wires (along with any additional accessories), it’s crucial to thoroughly test the stereo and steering wheel controls before reassembling the dashboard. If steering wheel controls are unresponsive, inspect connections and check dipswitch settings. Repeat the connection process if necessary, following the outlined steps.
STEERING WHEEL CONTROL CONFIGURATION
- A Volume Up
- B Volume Down
- C Track Up
- D Track Down
- E Source
- F Voice Control
- G Pick Up
- H Hang Up
BUTTON REMAPPING
The steering wheel buttons listed offer the flexibility of being re-configured or assigned dual functions. The availability of these buttons depends on the specific vehicle to which the interface is being installed and if the aftermarket radio supports them. In addition to button remapping, we offer the option to assign dual functions to each button on the steering wheel. This means that every button can be programmed to execute both a short press command and a long press command. You can also add your own bespoke configuration. Button configuration can be done by PC, MAC and smart phone via the USB port. Button Remapping instructions can be found in a separate guide on our website.
CONNECTION DIAGRAM
HEAD UNIT CONNECTION LEAD
SWC INTERFACE
SWC VEHICLE HARNESS
Documents / Resources
|
Aerpro SWTO2C Steering Wheel Control Interface To Suit Toyota
Vehicles
[pdf] User Guide
AURION, CAMRY, COROLLA, HILUX, KLUGER, LANDCRUISER 200 SERIES, PRADO 120
SERIES, PRADO 150 SERIES, PRIUS, TUNDRA, YARIS VITZ, HIACE, FJ CRUISER, TARAGO
ESTIMA, BLADE, RUKUS RUMION, RAV4, SWTO2C Steering Wheel Control Interface To
Suit Toyota Vehicle, SWTO2C, Steering Wheel Control Interface To Suit Toyota
Vehicles, Wheel Control Interface To Suit Toyota Vehicles, Control Interface
To Suit Toyota Vehicles, Interface To Suit Toyota Vehicles, To Suit Toyota
Vehicles, Toyota Vehicles, Vehicles
---|---
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>