Aerpro FP8580K1 Double DIN Facia Kit Instruction Manual

Aerpro FP8580K1 Double DIN Facia Kit Instruction Manual

Features:

• Suits double DIN Head Unit installation
• Black colour
• High grade ABS plastic
• Includes brackets for both 3rd Gen and 4th Gen models

Compatible Models:

Vehicles using (A) bracket
Subaru Forester 2008-2012 SH
Subaru Impreza 2007-2011 GE, GH, GR, GV
Subaru Liberty (Exiga) 2009-2014 YA
Subaru WRX 2007-2014

Vehicles using (B) bracket

(Factory Head Unit dependent)
Subaru Forester 2013-2014 SJ
Subaru Impreza 2012-2014 GP, GJ
Subaru WRX 2014-2015 (MY15)
Subaru XV 2012-2015

Inclusions:

1 x Double DIN facia kit
2 x Metal mounting brackets (A) 3rd Gen models
2 x Metal mounting brackets (B) 4th Gen models

Scan the QR code for more information on the product

CHSU1C Steering Wheel Control Interface for select Subaru vehicles

ABOUT THIS PRODUCT

CHSU1C
Analogue Steering Wheel Control Interface for select Subaru vehicles.

WIRING COLOUR CODES

Purple Right Rear Speaker + Yellow Permanent 12V
Purple/Black Right Rear Speaker – Black Ground
Green Left Rear Speaker + Red Ignition 12V
Green/Black Left Rear Speaker –
Grey Right Front Speaker +
Grey/Black Right Front Speaker –
White Left Front Speaker +
White/Black Left Front Speaker –

PRIOR TO INSTALLATION

Read the manual prior to installation. Technical knowledge is necessary for installation. The place of Installation must be free of moisture and away from heat sources. Please ensure that the correct tools are using during the installation to avoid damage to the vehicle or product. Aerpro can not be held responsible for the installation of this product.

TECHNICAL SUPPORT

If you need assistance setting up or using your Aerpro product now or in the future, call Aerpro Support Australia TEL: 03 – 8587 8898 FAX: 03 – 8587 8866 Mon-Fri 9am – 5pm AEST. If you would like to download a digital copy of this manual, or other Aerpro manuals/software, please visit the http://aerpro.com website.

FITTING GUIDE

1. Remove and disconnect the original head unit.

2. Connect the 12 way molex connector of the head unit patch lead (supplied separately) to the interface.
   

3. Connect the opposite end of head unit patch lead to the head unit steering wheel control input on the back of the aftermarket head unit.
   NB : This may be a 3.5mm jack plug or a wire input depending upon the head unit brand being fitted. Please see the head unit installation manual for further information on where to connect.
   Important: This step must be completed before connecting power to the interface. Failure to so do may result in no steering wheel control function.
   

4. Connect the 14 way molex connector to the interface

5. Connect the male power/speaker ISO harness to the female power/speaker ISO harNess from the aftermarket headunit. For
   aftermarket headhunts without an ISO connector, please refer to “Wiring Colour Codes” on Pg. 2.
   

6. Connect the female vehicle specific connectors on the harness to the male vehicle connector from the vehicle. Test head unit for correct operation.

STEERING WHEEL CONTROL FUNCTIONALITY

References

• Home | Aerpro
• Home | Aerpro

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>