Aerpro G5000 Inspection Camera Colour LCD Monitor User Manual
- June 1, 2024
- Aerpro
Table of Contents
Aerpro G5000 Inspection Camera Colour LCD Monitor
GENERAL SAFETY INFORMATION
WARNING: Read and understand all instructions. Failure to follow all instructions listed below may result in electric shock, fire and/or serious personal injury.
SAVE THESE INSTRUCTIONS!
- Prevent object and liquid entry. Never spill liquid of any kind on the video display unit. Liquid increases the risk of electrical shock and damage to the product.
- The unit is not shock-resistant. Do not use Aerpro G5000 as a hammer and avoid high impact resultant from things such as dropping the unit from height
- Do not immerse camera handle or LCD screen in water. Avoid moisture, and store product in a dry place. Such measures reduce the risk of electric shock and damage. The lens and the tube are water resistant when the unit is fully assembled, but the LCD screen and handle are not.
- Do not use the camera if condensation forms inside the lens. Let the water evaporate before using again.
- Turn off the system if it is not in use.
- Attention should be given to the environmental aspects of battery disposal.
- Remove the batteries when cleaning the unit.
- Remove the batteries before storing the unit for a long time.
- When necessary, REPLACE ALL FOUR (4) BATTERIES in this unit with new ones, not one (1) or two (2) batteries at a time.
- Use only the size and type of battery specified.
- Be sure to install the battery with the correct polarity as indicated in the battery compartment.
- Properly dispose of batteries. Exposure to high temperatures can cause batteries to explode, so do not dispose of in a fire. Place tape over the terminals to prevent direct contact with other objects.
- Some countries have regulations concerning battery disposal. Please follow all applicable regulations.
WELCOME
Congratulations on your purchase of our inspection video camera with color LCD
screen.
Please read the user manual carefully before using this product.
This product is designed as a remote inspection device, live time video
streaming. Appropriate for use in surveying pipes or other hard-to reach
places, equipment or furnishing installation, car repair, etc. Features
include waterproof LED lens, real-time viewing.
FEATURES
- Allows for easy surveying of small, hard-to-reach places
- Mini water-proof camera with SB□mm (3ft) flexible extended tube
- Manufactured and tested to IPS7 waterproof standard
- 2. 31 “TFT-LCD monitor
- Adjustable brightness on lens-mounted LED light
- 4 useful accessories included: hook, mirror and magnet
- Lightweight, handheld design, flexible and convenient to use
PACKING LIST
Accessories
STRUCTURE
INSTALLATION
To Install Batteries
(Dry your hands before installation or replacing batteries.)
- Remove battery cover;
- Extract the battery box from the handle, Insert four (4) AA batteries into their appropriate slots, with proper orientation, as indicated on the battery compartment;
- Replace battery cover.
To Attach Flexible Tube with Handle
To connect the flexible tube camera with control handle, first make sure that the keyed end of the tube is aligned with the slot in the handle, then use slight force to push them together. Once properly aligned, twist the treaded knob clockwise until the connection is securely in place.
To Install Accessories
The three (31 included accessories (mirror, hook and magnet) are all attached to the camera in the same way as illustrated below:
Video Output
- Insert video cable into the video out socket of the monitor, insert the other end of the cable into the video in jack of any compatible TV or display device.
- The LCD monitor is now capable of outputting high quality video to another display. (Video cable not included)
OPERATION
Switch on Camera
- Press and hold on the power switch for about 3 seconds to turn on the camera, the power indicator will illuminate and the LCD will become viewable.
- When in use, the tube should easily maneuver itself into position. Do not apply excessive force.
- The flexible tube can be bent into numerous shapes that may help you explore areas you otherwise thought were impossible to see.
- The accessories included with the Aerpro G5000 can be used to retrieve small items like dropped rings or screws.
Mirror Image
- In real-time monitoring mode, The mirror image can be adjusted by pressing the button.
LEDs Brightness Control
- The B levels of LED brightness can be adjusted by pressing the brightness button in real-time monitoring.
LCD Contrast Control
- The B levels of LCD contrast can be adjusted by pressing the contrast button in real-time monitoring.
SPECIFICATIONS
All specifications are subject to minor change without prior notice.
More Information
If you need assistance setting up or using your Aerpro product now or in the future, call Aerpro Support Australia
- TEL: 03 – B5B7 BBSB
- FAX: 03 – B5B7 BBSS
- Mon-Fri Sam – 5pm AEST
This manual is considered correct at time of printing but is subject to
change.
For latest manuals and updates refer to the website.
EU Environmental Protection
Waste electrical products should not be disposed of with household waste. Please recycle where facilities exist. Check with your local authority or retailer for recycling advice.
Scan
Documents / Resources
|
Aerpro G5000 Inspection Camera Colour LCD
Monitor
[pdf] User Manual
G5000 Inspection Camera Colour LCD Monitor, G5000, Inspection Camera Colour
LCD Monitor, Camera Colour LCD Monitor, LCD Monitor
---|---
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>