Aerpro CHIV7C Steering Wheel Control Module User Manual

Aerpro CHIV7C Steering Wheel Control Module

Product Information

Note: Application data is subject to change at any time.

Vehicle Compatibility:
Iveco Daily 2021> (vehicle will need modification)

Features:

• CAN steering wheel interface and harness
• Retains steering wheel controls and factory phone button functionality (if equipped)
• Allows for retention of original reversing camera
• Plug-and-play connectors for an easier installation process

Wiring Key:

IN ISO CONNECTOR|
---|---
Purple| Purple/Black
Green| Green/Black
Grey| Grey/Black
White| White/Black
Right Rear Speaker +| Right Rear Speaker –
Left Rear Speaker +| Left Rear Speaker –
Right Front Speaker +| Right Front Speaker –
Left Front Speaker +| Left Front Speaker –
Yellow|
Black|
Red|
Orange|

Additional Connections:

• Pink – Speed Pulse
• Green – Park Brake
• Purple/White – Reverse Gear
• Yellow RCA – Reverse Camera

Steering Wheel Control Functionality:

Front

1. Track Up| 2. Track Down| 3. Source| 4. Volume Up| 5. Volume Down| 6. Mute| 7. Pick Up (Short Press)
Hang Up (Long Press)
---|---|---|---|---|---|---
| | |
| 8. Speech|

Product Usage Instruction

Wiring Diagram:

Vehicle-Specific Connector – Connect to the relevant connector from the vehicle

Flying Wires

• Pink-Speed Pulse
• Green-Park Brake
• Purple/White – Reverse Gear

ISO Connector – Connect to aftermarket stereo

• Yellow RCA Connector (Reverse Camera) – Connect to camera input on the head unit

Main Wiring Loom Connector [14 Pin] – Connect to Interface Box

Interface Box

• Stereo Connection (Patch) Lead Connector [12 Pin] – SOLD SEPARATELY, connect to Interface Box (must be connected first, before a power connection is made to the interface)

Installation Guide – Wiring:

Note:
Before installing the interface, the factory stereo must be removed and disconnected. Consult the vehicle owner’s manual/handbook or contact a fitting professional.

1. Connect the 12 Pin connector from the stereo connection (patch) lead to the interface box. (SOLD SEPARATELY)

2. Connect the opposite end of the stereo connection (patch) lead to the steering wheel control input on the back of the aftermarket stereo.
   Note: This may be a 3.5mm jack connector or a wired input depending on the brand of aftermarket stereo is fitted. Consult the aftermarket stereo installation manual for further information on where to make the connection.

3. IMPORTANT: This step must be completed before connecting power to the interface. Failure to do so may result in a lack of functionality and the need to reinstall the product. Connect the 14 Pin connector from supplied wiring loom to the interface box.

4. Connect the power/speaker ISO connector to the power/speaker ISO connector at the rear of the aftermarket stereo.

Once the wiring is complete, test the steering wheel control functionality and reversing camera to ensure proper installation.

Note: Application data is subject to change at any time

• Iveco Daily 2021>

Note: The vehicle will need modification. Please familiarise yourself with the instructions before undertaking the installation.

FEATURES

• Allows for the installation of a double DIN aftermarket stereo
• Retains factory steering wheel control functionality
• Retains factory phone buttons
• Retains factory reverse camera (if applicable)
• Provides outputs for speed pulse, reverse gear, and park brake

PRODUCT INFORMATION

• The CAN steering wheel interface and harness which helps retain the steering wheel controls and factory phone button functionality of the vehicle (if vehicle is equipped).
• The harness also allows for the retention of the original reversing camera. The lead features plug-and-play connectors for an easier installation process.

WIRING KEY

IN ISO CONNECTOR

• Purple Right Rear Speaker +
• Purple/Black Right Rear Speaker –
• Green Left Rear Speaker +
• Green/Black Left Rear Speaker –
• Grey Right Front Speaker +
• Grey/Black Right Front Speaker –
• White Left Front Speaker +
• White/Black Left Front Speaker –
• Yellow Permanent 12V
• Black Ground
• Red Ignition 12V
• Orange Illumination

ADDITIONAL CONNECTIONS

• Pink Speed Pulse
• Green Park Brake
• Purple/White Reverse Gear
• Yellow RCA Reverse Camera

STEERING WHEEL CONTROL FUNCTIONALITY

The following diagram, though based on careful research, is an example only. Individual steering wheel control configurations may differ.

Front

1. Track Up
2. Track Down
3. Source
4. Volume Up
5. Volume Down
6. Mute
7. Pick Up (Short Press) Hang Up (Long Press)
8. Speech

WIRING DIAGRAM

INSTALLATION GUIDE – WIRING

Before installing the interface, the factory stereo must be removed and disconnected. To do this, please consult the vehicle owner’s manual/handbook or contact a fitting professional.

For universal patch leads, prepare the wiring loops in accordance with the instruction manual supplied before installation.

1. Connect the 12 Pin connector from the stereo connection (patch) lead to the interface box. (SOLD SEPARATELY)

2. Connect the opposite end of the stereo connection (patch) lead to the steering wheel control input on the back of the aftermarket stereo.
   NOTE:
   This may be a 3.5mm jack connector or a wired input depending on the brand of aftermarket stereo fitted. Please consult the aftermarket stereo installation manual for further information on where to make the connection.
   IMPORTANT: THIS STEP MUST BE COMPLETED BEFORE CONNECTING POWER TO THE INTERFACE. FAILURE TO DO SO MAY RESULT IN A LACK OF FUNCTIONALITY AND THE NEED TO REINSTALL THE PRODUCT.

3. Connect the 14 Pin connector from supplied wiring loom to the interface box.

4. Connect the power/speaker ISO connector to the power/speaker ISO connector at the rear of the aftermarket stereo.
   Note: For aftermarket stereos that do not have an ISO connector, please see ‘Wiring Key’ on Pg.2 for information on which wires to connect.

5. Connect any additional flying wires from the harness to the head unit as required.
   Note: Additional ‘flying’ wires can be connected to the vehicle to support various features i.e. parking brake trigger, reverse gear, and speed pulse.

6. Attach the male yellow RCA connector to the reverse camera input of the aftermarket head unit.

7. Connect the vehicle-specific connector to the vehicle’s main power connector.

8. Test stereo and steering wheel control functionality for correct operation before reassembling the vehicle dashboard. If steering wheel control functions are unresponsive, please uninstall the interface and wiring and reinstall carefully in accordance with the above steps.

TECHNICAL SUPPORT

Aerpro wants to provide a fast and suitable resolution to any problems encountered during the installation of this product. To get in touch with our dedicated technical support team, please fill in a contact form at aerpro.com/contact and provide as much information as possible.
www.aerpro.com.

References

• Home | Aerpro
• Contact | Aerpro

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>