Aerpro FP8580K3 Double DIN Facia Kit Owner’s Manual

Aerpro FP8580K3 Double DIN Facia Kit

Specifications

• Model No: FP8580K3
• Type: Double DIN Facia Kit
• Compatibility: Various Subaru Models

Product Information
The FP8580K3 is a Double DIN facia kit designed to suit Subaru vehicles. It includes metal mounting brackets for 3rd and 4th Gen models and is compatible with a range of Subaru vehicles using different brackets.
The CHSU3C Steering Wheel Control Interface is also included for select Subaru vehicles without OEM navigation, providing analogue steering wheel control functionality.

Product Usage Instructions

Prior to Installation

1. Read the manual thoroughly before installation.
2. Ensure technical knowledge is available for proper installation.
3. Install in a moisture-free and heat source-free location.
4. Use correct tools to avoid damage to the vehicle or product.

Fitting Guide

1. Remove and disconnect the original head unit.
2. Connect the 12-way molex connector of the head unit patch lead to the interface.
3. Connect the opposite end of the head unit patch lead to the head unit steering wheel control input on the aftermarket head unit.
4. Connect the 14-way molex connector to the interface.
5. Connect the male power/speaker ISO harness to the female power/speaker ISO harness from the aftermarket head unit. 6. Connect the female vehicle-specific connectors on the harness to the male vehicle connector from the vehicle.

Steering Wheel Control Functionality

• Original Button + Icon: Icon Up Arrow Down Arrow Speech Button Pick Up Icon Hang Up Icon
• Function: Volume + Volume Track + Track Mute Pick Up Hang Up

FAQ

1. Q: Can I install this facia kit on any Subaru model?
   A: The facia kit is specifically designed for compatibility with various Subaru models as listed in the manual. Ensure your vehicle matches one of the compatible models.

2. Q: What is the purpose of the Steering Wheel Control Interface?
   A: The Steering Wheel Control Interface allows you to retain steering wheel control functionality when upgrading your head unit in select Subaru vehicles without OEM navigation.

Double DIN Facia Kit to suit Subaru (Various Models)

Features

• Suits double DIN Head Unit installation
• Black colour
• High grade ABS plastic
• Includes brackets for both 3rd Gen and 4th Gen models

Compatible Models

Vehicles using (A) bracket

• Subaru Forester 2008-2012 SH
• Subaru Impreza 2007-2011 GE, GH, GR, GV
• Subaru Liberty (Exiga) 2009-2014 YA
• Subaru WRX 2007-2014

Vehicles using (B) bracket
(Factory Head Unit dependent)

• Subaru Forester 2013-2014 SJ
• Subaru Impreza 2012-2014 GP, GJ
• Subaru WRX 2014-2015 (MY15)
• Subaru XV 2012-2015

Inclusions

• 1 x Double DIN facia kit
• 2 x Metal mounting brackets (A) 3rd Gen models
• 2 x Metal mounting brackets (B) 4th Gen models

CHSU3C Steering Wheel Control Interface

for select Subaru vehicles

Vehicle Application

• Subaru Forester (SJ) 2012 – 2013
• Subaru Impreza (G4) 2012 – 2015
• Subaru Outback (BR/BS)2009 – 2014
• Subaru XV (G4) 2012 – 2015
• For vehicles without OEM Navigation

Key Features

• Retains Steering Wheel Controls(if equipped)
• Retains OEM Phone Buttons(if equipped)

The information provided in this document is subject to change without notice due to manufacturer changes and/or improvements to the product/s.

ABOUT THIS PRODUCT

CHSU3C
Analogue Steering Wheel Control Interface for select Subaru vehicles without OEM navigation.

WIRING COLOUR CODES

• Purple Right Rear Speaker +
• Purple/Black Right Rear Speaker –
• Green Left Rear Speaker +
• Green/Black Left Rear Speaker –
• Grey Right Front Speaker +
• Grey/Black Right Front Speaker –
• White Left Front Speaker +
• White/Black Left Front Speaker –
• Yellow Permanent 12V
• Black Ground
• Red Ignition 12V

PRIOR TO INSTALLATION

Read the manual prior to installation. Technical knowledge is necessary for installation. The place of Installation must be free of moisture and away from heat sources. Please ensure that the correct tools are using during the installation to avoid damage to the vehicle or product.
Aerpro can not be held responsible for the installation of this product.

TECHNICAL SUPPORT

If you need assistance setting up or using your Aerpro product now or in the future, call Aerpro Support Australia
TEL: 03 – 8587 8898
FAX: 03 – 8587 8866
Mon-Fri 9am – 5pm AEST.
If you would like to download a digital copy of this manual, or other Aerpro manuals/software, please visit the http://aerpro.com website.

www.aerpro.com.au

FITTING GUIDE

1. Remove and disconnect the original head unit.

2. Connect the 12 way molex connector of the head unit patch lead (supplied separately) to the interface.
   

3. Connect the opposite end of head unit patch lead to the head unit steering wheel control input on the back of the aftermarket head unit.
   NB: This may be a 3.5mm jack plug or a wire input depending upon the head unit brand being fitted. Please see the head unit installation manual for further information on where to connect.
   Important: This step must be completed before connecting power to the interface. Failure to so do may result in no steering wheel control function.
   

4. Connect the 14 way molex connector to the interface
   

5. Connect the male power/speaker ISO harness to the female power/speaker ISO harness from the aftermarket head unit. For aftermarket head units without an ISO connector, please refer to “Wiring Colour Codes” on Pg. 2.
   

6. Connect the female vehicle specific connectors on the harness to the male vehicle connector from the vehicle. Test head unit for correct operation.

STEERING WHEELCONTROL FUNCTIONALITY

www.aerpro.com.au

References

• Home | Aerpro
• Home | Aerpro

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>