SUNSKY 988X Heating Separating Glass Machine Instruction Manual
- September 9, 2024
- sunsky
Table of Contents
SUNSKY 988X Heating Separating Glass Machine
Professional R&D and production of LCD screen repair equipment
Usage notice
Please read these instructions for use and safety instructions carefully before using this product, and please keep these instructions for use properly. In order to protect your rights and interests, please confirm the completeness of the following information before you use it:
- 988X product
- Power cord
- Product manual
Note: The product silk screen depends on the actual product purchased
Use safely
Before and after using this product, please pay attention to the following safety precautions to avoid personal or property damage:
- Please use this product within the specified voltage range to avoid excessively high or low voltage, which may cause product damage or danger.
- Do not place this product near flammable or explosive items to avoid causing fire or explosion.
- Do not immerse this product in water or contact with liquids to avoid electrical failure or electric shock.
- Do not disassemble or modify this product to avoid damaging the product or affecting product performance.
- Do not use this product for illegal or unreasonable purposes to avoid unnecessary trouble or liability.
- When using this product, please abide by relevant laws and regulations, and respect the intellectual property rights and privacy rights of others.
Trouble Shooting
If you encounter the following common problems and failures while using this product, please refer to the following solutions and suggestions, or contact our after-sales service:
- This product cannot be powered on or connected: Please check whether the power cord and data cable are plugged in properly, whether the power socket is normal, and whether the power switch is turned on. If the problem persists, please contact our after-sales service.
- The output data of this product is inaccurate or abnormal: Please check whether the output lines are in good contact, whether the output device is working normally, and whether the output parameters are reasonable. If the problem persists, please contact our after-sales service.
Product description
Product parameters
Name | Heating separator | Numbering | 988X |
---|---|---|---|
Temp range | 0~120°C | Voltage | AC110/220V |
Product Size | 340130165mm | Package Size | 385150200mm |
Product Weight | 3kg | Package weight | 3.5kg |
Notice: Due to the influence of measurement methods, processes,
environment and other factors, the size and weight of the product may have
slight errors from the marked values.
Please refer to the actual product received. Thank you for your understanding
and support!
Operating Instructions
Main interface
Operation steps
- Press the bottom suction cup to make the product stick to the flat surface 6.
- Connect to power supply 8.
- (Before connecting to the power supply, please confirm whether it is 110V or 220V)
- Control the platform by loosening (flipping and fixing 1) (rotating and fixing 3)
- Temperature setting 10.
- Press (Set M) to enter the settings page, adjust the temperature value by +- press (Set M) again to confirm after adjustment.
- Press Vacuum Start 5 and place the screen on the work area to allow it to absorb 7.
- Take out the separation wire to separate the screen
- After the split is completed, press Break Vacuum to complete the screen separation.
- Remove OCA glue by adjusting the flip platform