xiaomi S20 TV Stick User Guide
- June 4, 2024
- Xiaomi
Table of Contents
S20 TV Stick
User Guide
Parts
TV Stick x I
User Guido x l
Remote Controller xl
Power Cable x 1
HDMI Cable x 1 ****
TV Stick General information
Remote Controller Button Functions
1. Power
2. Menu
3. Up
4. Left
5. Down
6. Return
7. Home
8. Volume +
9. Volume –
10. YouTube app
11. Disney+ app| 12. Mouse
13. Voice
14. Setup
15. OK/Selection
16. Right
17. Iptv Channel +
18. Channel –
19. Volume-
20. Netflix app
21. Google play app
---|---
Pless and hold the “OK” and “-” buttons at the same time. Close to the TV stick, release the button after the light on the remote control flashes, and wait for automatic pairing.
Installation
-
Plug the HDMI cable to the HDMI port of your TV set, then the power cable to the USB port. Afterward, plug both cables into the respective ports of the TV stick.
-
Connect the TV Stick to the WiFi network
LED indicator working status
The TV stick LED indicator has a two-color light: green and red.
The LED indicator will turn green when the device is on. The system will start automatically when the power supply is connected.
The LED indicator will turn red when the system is on standby.
*The LED indicator will be turned off whenever the power supply is cut off.
About the adapters that can be used to load the TV stick:
If you connect the USB power cable to an adapter, the ideal voltage is from
4.8V to 5.3V, and the input current should not be less than 1A. Some quick
charge adapters are not suitable for the TV stick because the output voltage
of these adapters may become very high during use.
Exemption clause
The illustrations included in this guide are for reference only. Due to the
constant upgrade of the goods, the physical product may differ slightly from
the illustrations. Always refer to the physical product.
Tips : HDMI only supports output mode; Access to a laptop; Will does not
work properly
FCC STATEMENT :
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) This device may not cause harmful
interference, and (2) This device must accept any interference received,
including interference that may cause undesired operation. Warning: Changes or
modifications not expressly approved by the party responsible for compliance
could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates uses and
can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
FCC Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment. This equipment should be installed and operated with
a minimum distance of 20cm between the radiator & your body.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>