dyson SV12 JN.00000 Outsize Cordless Vacuum Cleaner User Manual
- June 13, 2024
- dyson
Table of Contents
dyson SV12 JN.00000 Outsize Cordless Vacuum Cleaner
Product Information
The Dyson cordless vacuum cleaner is a versatile cleaning tool that can be used in a horizontal position with the wand and cleaner head attached. It comes with a range of features and modes to suit different cleaning tasks.
Features
- Three power modes: Eco, Auto, and Boost
- LCD screen for easy control and monitoring
- Dyson DLSTM technology for automatic motor speed adjustment
- Digital MotorbarTMXL cleaner head for efficient cleaning
- Click-in battery for easy replacement
- Run time countdown and battery health indicators
- Alert system for maintenance reminders
Product Usage Instructions
Getting Started
- Attach the wand and cleaner head to the main body of the vacuum cleaner.
- Ensure that the wand release button is aligned with the top of the main body.
Power Modes
Your machine has three power modes
- Eco Mode : Provides the longest battery life for longer cleans all around your home.
- Auto Mode : Offers an optimum balance of power and run time. Attach the Digital MotorbarTMXL cleaner head to activate Auto mode.
- Boost Mode: Provides maximum power but has the shortest battery life.
To change power modes, simply press the designated button on the machine.
Battery Usage and Charging
To ensure optimal performance and battery life
- Use Eco or Auto/Med mode for regular cleaning tasks.
- When the battery needs charging, the machine will pulse three times and a low run time icon will appear on the screen.
- When the battery is empty, a red warning icon will appear on the screen.
- Connect the vacuum cleaner to a power supply using the provided charger to recharge the battery.
Cleaning and Maintenance
Emptying the Bin
- Press the red button located on the bin runner to release the bin.
- Slide the bin off the runner and empty it.
- Clean the bin using a damp, lint-free cloth. Ensure that the bin and seals are completely dry before replacing.
Note: Refer to the user manual for detailed instructions on caring for your floors, changing the battery, clearing blockages, cleaning your tools, and other maintenance tasks.
Getting started
Power modes
Your machine has three power modes for different tasks. Change power modes
quickly using a single button.
Eco mode
Maximum run time for longer cleans all around your home.
Auto and Med mode
The optimum balance of power and run time. Attach your Digital Motorbar™ XL
cleaner head to activate Auto mode. Dyson DLS™ technology automatically
changes motor speed between floor types.
Boost mode
Designed for intensive spot cleaning of ground-in dirt.
Run time countdown
- When the battery needs charging, your machine will pulse three times and a low run time icon will appear on the screen.
- When your battery is empty, a red warning icon will appear on the screen.
- When Particle count and graph is turned on, low run time will be in amber and red when in Boost mode.
Battery health
To get the best performance and life from your battery, use Eco or Auto/Med
mode.
Exit settings menu
To exit the settings menu, tap to scroll through the selection menu. Select
‘Exit menu’.
Alerts
The alerts you might see are
Filter – the filter isn’t fitted correctly, or needs cleaning. Blockage – your
machine has a blockage that needs removing.
Cleaning your bin
Remove your bin
- If it is necessary to clean your bin, empty it as shown in the ‘Emptying your bin’ section.
- Press the red button located on the bin runner to release the bin and slide your bin off the runner.
- Only use a damp, lint-free cloth to clean your bin.
- Make sure that your bin and seals are completely dry before replacing.
Refit your bin
- Insert the spine on to the bin runner.
- Close your bin by pushing the bin base upwards until the bin and bin base click into place.
- Your bin isn’t dishwasher safe and the use of detergents, polishes or air fresheners to clean your bin isn’t recommended, as it may damage your machine.
Clearing blockages
- Disconnect your machine from the charger before looking for blockages. Be careful not to touch the power button and be aware of sharp objects.
- Leave your machine to cool down before looking for blockages.
- Don’t use your machine when looking for blockages as this could cause injury.
- If your machine detects a blockage, the motor will pulse six times. You won’t be able to use your machine until the blockage has been cleared.
- If you try to use your machine when the motor is pulsing, it will automatically cut out.
- Leave your machine to cool down before looking for blockages and, for your safety, take care not to touch the trigger.
Clearing obstructions from your
- Motorbar™ cleaner head
- Your Motorbar™ cleaner head doesn’t have a washable brush bar.
- To maintain optimum performance, check your brush bar regularly and clear any obstructions.
- Make sure your machine is disconnected from the charger and take care not to touch the trigger.
Remove your brush bar
- Don’t put any part of your machine in a dishwasher or use detergents, polishes or air fresheners.
- Press the cleaner head release button on the end of the wand.
- Place the cleaner head upside down.
- Lift the catch on the cleaner head to release the brush bar.
- Slide your brush bar out of the cleaner head.
Look for obstructions
- Clear any debris from your brush bar.
- Check inside the cleaner head and remove any debris or blockages.
- Your Motorbar™ cleaner head and brush bar aren’t washable.
- Wipe over with a damp lint-free cloth.
Replace your brush bar
- Push the brush bar back into the cleaner head.
- Push down the brush bar release catch until it locks in position.
Clearing blockages from your
Hair screw tool
Your Hair screw tool doesn’t have a washable brush bar. To maintain optimum
performance, check your brush bar regularly and clear any obstructions.
Make sure your machine is disconnected from the charger and take care not to
touch the trigger.
Remove the cover and brush bar
- Remove the Hair screw tool from the wand or machine.
- Push the base plate open. Press the red lever down to release the cleaner head cover.
- Pull the cleaner head cover off the main body of the tool.
Look for obstructions
- Pull your brush bar firmly to remove it from the main body.
- Check and remove any obstructions from all three parts of your Hair screw tool.
- Your Hair screw tool isn’t washable. Wipe over with a damp lint-free cloth.
- Don’t put any part of your machine in a dishwasher or use detergents, polishes or air fresheners.
Re–assemble Hair screw tool
- Put your brush bar back into position and press firmly until it clicks back into position.
- Check the red locking lever is in the unlocked position. Align the cleaner head cover with the guide on the main body. Push it down until it clicks into position.
- Push the red locking lever up until it clicks into position and push the base plate back into place.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>