SUNSKY CRP2342 MRT-Camera User Manual
- October 30, 2023
- sunsky
Table of Contents
SUNSKY CRP2342 MRT-Camera
User Guides
Camera connected to the car:
- Red cable connect with ACC 12~24V+.
- Yellow cable connect with reverse lamp+
- Black cable connect with GND.
Steps for usage:
-
Open the MRT-Camera APP and click the wifi connection button. Or directly open the wlan/wifi connection settings in the phone settings.
-
In the pop-up wlan/wifi connection setting interface, turn on wlan/wifi and refresh the search wifi signal.
-
Find and connect the wifi signal named MRT-WifiCamera xxxXXX.
(Note: xxxxxx is a 6-digit device ID.) -
When the cell phone prompts whether to keep the wifi connected, choose to keep the connection.
-
Return to the APP to use the wifi rearview camera normally. When the connection is successful, the wifi button icon is displayed in green.
Main functions
- Intelligent video recording function
- Intelligent video recording and sharing function can be achived after connecting to smart devices via wifi.
- Intelligent electronic rearview mirror function you can watch the situation behind the car in real time after entering rear view mode through the device to Prevent the occurrence of danger and ensure driving safety.
Intelligent monitoring function
- Can be installed in front of the car, rear, left and right sight blind spot position, open the software to monitor
Download The App
Method one:
- Download the Android app using the scann- ing software or browser that comes with the
- Android phone to scan the corresponding QR code on the user manual. After the down is complete, click install.
Method two:
- Search for MRT-Camera in the Google Play, then download and install it.
- iOS APP Download
Method one:
- Scan the IOS QR code in the user mannual with camera or other scanning software, enter the appstore, download and install the
- MRT-Camera application.
Method two:
Search for MRT-Camera in the appstore, then download and install.
App Instructions
- video recording, image frame rate
- willdecrease when video recording take a photo
- video and photo playback
- click this icon to select WiFi signal
- starting with MRT and Color turns green
- Image mirroring
- setting the reverse scale switch
Troubleshooting
-
No image:
Make sure the camera is connected correctly, open the phone’s wifi signal list, and check if the phone is connected successfully to the wifi hotspot generated by the camera. -
Video is not smooth
Check if the antenna isshielded by metal -
Products and accessories
Camera,screw,wxtension cable, specification,3M adhesive
Installation
Rear view installation red cable connect with ACC 12V ~ 24V+ yellow cable connect with reverse lamp+ black cable connect with GND.
Front\left\right view installation
- Red cable connect with ACC 12~24V.
- Yellow cable do not need to be connected.
- Black cable connect with GND
QR SCAN
- iOS download
- Google Play download
- Website download
Android download
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>