sunsky MZ006 Digital Voice Recorder User Manual

May 15, 2024
sunsky

sunsky MZ006 Digital Voice Recorder

SELLER MESSAGE
Thank you for using our company’s digital products! If you have any questions, you can contact our service team to resolve. We will help you to solve the problem as soon as possible.

PRODUCT DETAILS

sunsky MZ006 Digital Voice Recorder 1

  • “+” Volume up button / next button
  • “II◀” Play / Pause
  • “-” Button to decrease the volume / previous button

START RECORDING–THERE ARE TWO RECORDING MODE

Continuous Recording Mode
When the device is off, push the button to the “NOR” mark, then turn on the device. First the the red light will flash once, then blue light flashes, indicating that the device enter into the Continuous Recording Mode.

Voice Activated Recording
Activate or deactivate the voice control with the voice control button. When the device is on the “off” status, and the voice activated function turns on(VOR button is on), Move the power button to “ON” position to turn on the device, First the red light will flash once, and after about 1 second, the red and blue light will flash once then blue light flashes , indicating that the device has started voice activated recording.

Note : The number of times the blue light flashes represents the power supply.
The blue light flashes 4 times indicate that the power supply is 100%, 3 times indicates 75% flash twice indicates 50%, and flash one indicate 25% power supply.

SAVE THE RECORDING
Turn off the device by moving the button to “OFF”, the red light flashes three times and goes out, and the recording will be automatically saved.

Note : When the memory is full, the red and blue indicator lights will flash 10 times slowly and save the recording file automatically then turns off. Please connect the device to the computer, back up the memory files to the computer, and then delete some useless files in the device, then the device will work in normal the next time when it turns on.

CHARGING

  • First, please confirm the device power switch is on the“OFF” position. Then connect the device with the USB charging cable (included) to the computer or power charger (not included) to charge.
  • when the device in the off state, the red light will flash during charging, and the blue light will stay on when it was fully charged.

Note:

  1. It is recommended to use the adapter with output of 1-2A when charging the device, but it is not recommended to use the fast charging head.)
  2. When the battery is low and the voltage is lower than 3.5V, the red light will flash once in 10 seconds. When the voltage is lower than 3.4V, it will automatically save the recording and shut down.

SET TIME STAMP–THERE ARE TWO SETTING METHOD

Turn off the device by moving the button to “OFF”,then Connect the recorder to the computer via USB cable, click the removable disk. There are two ways to set date and time.

Select the folder named “SETTIME” and open the “SetTime” in the folder, as shown in the following image. Click SetTime and the system will automatically synchronize the time of the recorder with that of the computer.
Note : Please exit the antivirus software before synchronization in WIN systems.

Open the TXT file named “timeset”, select the time on the document(Just like the picture showed, select the time in formate “HH:SS YY/MM/DD”), and press the “F5” key to quickly update and synchronize the PC time, then save it. (This method is compatible with WIN / IOS systems.)
Note : If you need to format the recorder, please backup of the files you don’t want to lose first.

sunsky MZ006 Digital Voice Recorder 4

TXT DOCUMENT SETTING

  1. Bit Rate Setting & File Save Format
    Open the TXT file named “reset”, write optional number “0-6” behind “BIT:” to set the bit rate from“64K-1536K”. Among them, 0-2 is in MP3 format and 3-6 is in WAV format.

  2. Sensitivity Adjustment
    Write optional number “1-7” behind “GAIN:”. The greater the number, the louder the recording voice will be.
    Note : Please set according to the recording environment to avoid excessive background noise or excessive volume causing sound breakage.

  3. Recording Segment Time Setting
    Adjustable from 10 to 240 minutes, and you can set and divide the recording file according to your needs. Suitable for continuous recording over a long period of time.

sunsky MZ006 Digital Voice Recorder 5

RECORD/MUSIC PLAYING WITH HEADPHONES

  1. Play Music / Recording Files

  2. First connect the headphones to the recorder.

  3. Turn on the device and enter playback mode(blue light on during playback).

  4. Long press the “Pause / Play button” on the headphones once to switch from playing music files to playing files recorded by the recorder and vice versa.

  5. Volume Adjustment / Next and Previous Track
    While playing music / recording files, long press “+” or “-” to increase or decrease the volume(Red and blue lights are on). Briefly press the “+” or “-” to switch between previous and next tracks.

  6. Pause
    When the device is in playback mode, press and hold the” Play / Pause” button to enter the pause state (Red and blue lights are on).
    Note : If you plug in the earphones halfway after the device turns on, the file being recorded will be automatically saved, and then the previously recorded file will be played.

CONNECT TO COMPUTER TO PLAY

Please turn off the device first. Use the original USB data cable to connect to computer, find and open the folder named , you will see all recording files.
In Windows system, you can use Windows Media Player to play. In IOS, you can download VLC Media Player in the app store and install it.

sunsky MZ006 Digital Voice Recorder 3

FUNCTIONAL PARAMETERS

Product type Voice recorder
Playback format MP3 / WMA / WAV
Hardware Interface TYPE-C
Frequency 48KHz
32GB Up to 288 hours of recording (with 512KBPS)
Battery capacity 2500 mAh
Recording format MP3 & WAV
Recording quality 64-1536 KBPS

QUESTIONS AND ANSWERS

Q1: Suddenly Unable to Record…
A1:

  1. Please connect the device to a computer and back up the important files first, and then format the device.
  2. If it still unable to record, please check the flashing status of the indicator light.
  3. If the indicator light stays on or flashing all the time, you need to update the firmware to solve it.
  4. If the indicator light does not light up, please connect to charge.
  5. After charge, the indicator light stays on or flashing all the time, please solve it as step ③.
  6. If the indicator light still does not light up after charging, the device may be damaged, please contact us via Amazon email or our customer service email in time. We will deal with it immediately for you.

Q2: The Indicator Light is not Responding or Under Abnormal State that is Always Bright…
A2: Please backup the important files firstly. After connecting to the computer, click on my computer, find the mobile drive, right click the mouse, select Format, and then select Quick Format. If its still not work, the device may be damaged, please contact us via Amazon or our customer service email in time. We will deal with it immediately for you.

Q3: No Response after Connecting to the Computer via the USB Cable…
A3:

  1. Check whether the switch of the recorder is in the OFF state, be sure to be in the OFF state.
  2. Check whether the original USB data cable is used, try to use the original USB data cable (very important)
  3. Replace another computer’s USB interface, try to connect with the computer rear USB Interface.
  4. If the problem still not been resolved, please check if the device has been severely dropped. And contact with our product technical support team via Amazon email or service email.

Q4: Can’t play recorded files when connected to a computer…
A4: 

  1. After connecting the adapter cable and earphones, turn on the device to check whether the recorder can play with headphones normally or not.
  2. If the recorder can play with headphones normally, it indicates that there is a problem with the decoding of your computer player, and you need to re-install a player that supports WAV format decoding. Or you can set Windows Media Player as the default player.
  3. If it can’t play with headphones, it is possible that you have not turn off the devive during the recording process, which caused the recording file to be damaged. You can connect it to the computer to delete all old recording files, re-record and repeat the above operation and check.
  4. If the above steps still cannot help you, please contact us via Amazon Email.

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

sunsky User Manuals

Related Manuals