SUNSKY SWM 1789 Car MP3 Player Instruction Manual
- October 27, 2023
- sunsky
Table of Contents
SUNSKY SWM 1789 Car MP3 Player Instruction Manual
THANK YOU FOR PURCHASING OUR PRODUCTS.
After you receive the product, please read the installation instructions in order to better use the product and avoid damage caused by wrong operation, thank you!
PRECAUTIONS BEFORE INSTALLATION
Thank you very much for purchasing and using our products. When you receive the product, please do not take it directly to the car for installation, because the product may affect the product after a long journey, please try the machine first And then install.
TEST METHOD:
Take the machine to the car’s battery for test machine. Combine the red and yellow wires of the standard power cord of the machine together and connect it to the positive pole of the battery. The black wire of the power cord is connected to the negative pole of the battery. Wait 10 seconds, press each button of the machine to see if the machine can be turned on normally. If it can be turned on, it means that the machine is no problem. You can install it. If the test machine cannot be turned on normally, please confirm whether it is strictly in accordance with The steps of our test machine method to operate. If the problem is still not resolved, please contact our staff in time, thank you for your cooperation.
PRODUCT WIRING INSTRUCTIONS
- When the yellow line B+ and the red line ACC have a 12V positive power at the same time, the unit can be turned on normally.
- The yellow line B+ keeps the power on and the machine has a memory function.
- 8 speaker cables, each cable can not be grounded, can not be shared, can not touch the line, otherwise there will be no sound output, output sound distortion, machine fever and so on.
OPERATING INSTRUCTIONS
-
POWER/MUTE
Short press turn on, Short press again to MUTE; Long press to turn off. -
MOD/
Push this button repeatedly and the lcd will display the following sequence: RADIO–USB- -SD–AUX IN–BT. In bluetooth mode, short press to end call. -
Micro SD CARD SLOT
Insert the Micro SD card in the slot. Select SD with the mode selector. Audio will begin playback automatically. -
VOLUME / SELECT CONTROL
Rotate the volume knob to control the volume ; Press the select button shortly until the desired function is shown on the display: AUTO(colorful switch: auto red-green-blueyellow-cyan-purple-white)–BASS–TREBLE- BALANCE–FADER–EQ (classic-rock-popflat-jazz-tech-optimal country-dance-eq off)–LOUD(on/off)–DX/LOC–STEREO(mono)– AF(on/off) –TA(on/off)–PTY(on/off)–EON(DX/LOC)–12/24- “10:51″(clock)–DSP(on/off, on 30Hz~20KHz to gain ±18).
AUDIO RECORDING:
In radio mode, Bluetooth mode, and AUX mode, long press the VOL button to start recording the audio being played. (You need to insert a USB device or TF card to start recording and save.) -
BND/AMS/
In radio mode, press the band to browser station (FM1-FM2-FM3 AM1-AM2), long press to automatically search for and store radio stations; In bluetooth mode, short press to answer call. -
MIC HOLE
Microphone pickup. -
BUTTON
In playback mode, it is the function of the previous track; Long press to rewind the track.
In radio mode, this function can search backward for radio stations. -
BUTTON
In playback mode, it is the function of the next track; Long press to forward the track.
In radio mode, this function can search forward for radio stations. -
CLK: Clock display
Short press CLK to display the clock. Then long press CLK to set the hour and rotate the VOL button, then short press the VOL button to set the minute and rotate the VOL button. -
1/ BUTTON
In Radio mode press to play preset station #1.
In USB/SD mode press to start music playback, Press again to pause playback. -
2/INT BUTTON
In Radio mode press to play preset station #2.
Pressing this key will playback a snippet of each track. Press again to stop snippet and listen to the full track. While this mode is activated “ ” will be displayed.
VOICE ASSISTANT:
In Bluetooth mode, short press can wake up the phone’s voice assistant. -
3/RPT BUTTON
In Radio mode press to play preset station #3
Pressing this key will activate Repeat mode. They current track will be continually repeated until repeat is deactivated. When this mode is activated “ ” will appear. -
4/RDM BUTTON
In Radio mode press to play preset station #4
Pressing this key will activate Random playback mode. When this mode is activated ” ” will appear. -
5/-10 BUTTON
In Radio mode press to play preset station #5.
In playback mode, short press to -10, long press to choose previous folder. -
6/+10 BUTTON
In Radio mode press to play preset station #6.
In playback mode, short press to +10, long press to choose next folder. -
USB PORT
Connect your external device via USB (not included) to playback audio. -
AUX IN JACK
Insert your portable player into the jack, in AUX mode, audio will come through the car speaker. -
IR RECEIVER
Remote control infrared signal receiving window. -
USB CHARGING HOLE
Plug in the data cable to charge for mobile devices with 5V_2.1A. -
RESET BUTTON
Press to restore the unit to factory defaults.
SPECIFICATIONS
GENERAL
- Power Supply Voltage: 12~14.4V DC, Negative Ground
- Max Current Consumption: 15A
- Max Output Power: 4X60W
BLUETOOTH INSTRUCTIONS
- Device Name: “CAR BT
- PIN Number: “0000″ (If need)
- Bluetooth connection method: When the machine is powered on, the phone turns on the Bluetooth function, click on the search device. When [CAR BT] is displayed in the list, click [CAR BT] to connect.
- Bluetooth play mobile music: After the Bluetooth connection is successful, open the music player software on the mobile phone to play music, increase the volume of the mobile phone, and press the MODE button repeatedly until the [BT] (Bluetooth mode) is displayed, it is already playing.
- Bluetooth name not searched or searched for connection unsuccessful?
Solution: Cancel all other Bluetooth devices connected to the phone, and then click again to search for the device. If the problem is still not solved, you can search/connect several times. If it still doesn’t work, unplug the host and wait for 1 minute, then power on again, and then search for connections.
MOBILE APP REMOTE CONTROL
iPhone, scan the QR code on the left to download the APP [SWT Car Link];
Android, scan the QR code on the right to download the APK [iCar Link].
- Press Mode on the Music System to go to BT mode, if you have not connected your mobile to music system.
- Switch ON for BT function with your mobile phone device.
- Open the APP [iCAR Link] after installation. It will automatically search the list of Bluetooth devices.
- Select [CAR APP] in list.
- Now you can use the APP as a remote control to operate the Music System.
LOCATE AND FIND CAR
- First, the APP must connect to the car player. When the car is turned off (ACC is off), the APP will remember the geographic coordinates at the time;
- When you are far away from the car, you can click the location button in the APP;
- The navigation software installed on the mobile phone will automatically start and locate the geographic coordinates of the parking at the time, and follow the navigation to find the car.
REMOTE CONTROL FUNCTION
- Power On/off
- Mute On/off
- Mode: Switch mode
- Number 1 ; Play / Pause
- Number 2 ; Intro to Music
- Number 3 ; Loop Playback
- Number 4 ; Random Playback
- Number 5 ; Track-10
- Number 6 ; Track+10
- Loudness On/off
- Volume +
- EQ
- Previous Track
- Set Up
- Next Track
- APS(automatically Search For Stored Stations) ; Answer Call
- Volume –
- Band(FM1-FM2-FM3-AM1-AM2); End Call
- Stop Music
- Switch Mono/stereo
- Clock Display
NOTE:
- Before using the remote control, please remove the battery insulation paper at the bottom of the remote control.
- If the remote control does not work, please take the battery off and wipe it, then put it back, generally it can be used normally. Still not working, it may be that the remote control battery is low, please replace the remote control battery.
INSTALLATION STEP DESCRIPTION
-
Separate the iron frame from the host.
-
Insert the iron frame into the car radio installation window.
-
Fix the iron frame to the car with a screwdriver.
-
Press the main unit into the iron frame and let the machine snap into the iron frame.
COMMON PROBLEMS AND SOLUTIONS
Q: My original car plug is inconsistent with the new unit plug. How to wire it?
A: There is a lossless line. The new unit tail line and the lossless line are the same color. It is not connected to the color. After plugging it, insert one end into the original car plug, insert one end into the unit, and the original car plug line is normal. The unit will work properly. If there is no lossless line, you must distinguish the function of each line on the original car plug. Refer the wiring diagram on the top of the machine cover, and wire the corresponding function of each line on the new machine. Do not put the new machine. The line is connected to the original car plug wire by color
Q: I have connected the line, but the unit is not powered, can’t boot?
A: Check if the fuse on the unit is blown. Put the red line of the new unit together with the yellow line and take it to the positive side of the car battery. The black wire of the new unit is connected to the negative pole of the battery. Press the unit start button, if the unit It can be turned on normally, indicating that there is no problem with the unit. This requires checking the circuit on the original car plug. Generally, the red line or the yellow line of the new unit does not come over
Q: After the line is connected, the unit can be turned on, but there is no sound or the sound is small or intermittent. What is the reason?
A: The unit has four color lines of white, gray, green and purple. The two wires of each color are connected to one speaker. Several speakers are connected to each other. No one needs to be connected, and it is empty. If the above phenomenon occurs, the possible reason is that the speaker cable of the original plug is not distinguished when the wiring is connected. The two wires of one speaker are not connected to the same color line, or the speaker cable has a ground/wire. You can take off the speaker cables and find a speaker from the outside. Each color is tested separately and whether there are any problems.
Q: The unit can be turned on and working normally, but every time you start the car, you have to turn it on manually, and the time and playback status are not remembered. What is the reason?
A: In this case, the red line of the new unit tail line is reversed with the yellow line, and the two lines can be reversed and connected. If the time, the radio has a memory, can not remember when playing the USB flash drive, this phenomenon is that the power-on reset time of this USB flash drive is too long, the unit does not detect the U disk when booting the U disk, so the memory is not Live, replace the USB flash drive of other brands can be solved.
Q: The unit can boot normally, but does not read the memory card or USB flash drive?
A: This phenomenon is generally incompatible with the memory card or the file format inside the USB flash drive. Please format the memory card or USB flash drive on the computer. The system format is: FAT32, and re-download the MP3 song for playback.
Q: I have a subwoofer, After the connection, the subwoofer does not ring, What is the reason?
A: The unit provides an audio for the subwoofer. The interface is the red/white lotus jack onthe back of the unit. If the subwoofer has no sound after the connection, please pull out the subwoofer cable plug and touch the connector wire core position of the cable. If the subwoofer is normal, it will ring. If it does not ring, please check Power and settings on the cable or subwoofer. Some subwoofers with FM and Bluetooth function. When using the audio function of the unit, please set the mode of the subwoofer to AUX mode.