SUNSKY 15W Disk Check Wireless Charger for Smartphones User Guide
- October 30, 2023
- sunsky
Table of Contents
SUNSKY 15W Disk Check Wireless Charger for Smartphones
Product Information
- Product Name: Wireless Charging Disk
- Features: Disk check, Wireless Charging
- Charging Power: 15W
- User Guide: Included
- FCC Warning: Yes
Product Usage Instructions
- Place the Wireless Charging Disk on a flat surface.
- Connect the charging cable to the Wireless Charging Disk and plug the other end into a power source.
- Place your compatible device on the Wireless Charging Disk. Ensure that your device is properly aligned with the charging area of the Wireless Charging Disk.
- The LED light on the Wireless Charging Disk will turn on to indicate that your device is charging.
- To perform a disk check, connect the Wireless Charging Disk to your computer using the provided USB cable. Open the disk check utility on your computer and follow the instructions.
Note: To ensure compliance with FCC regulations, this equipment should be installed and operated with a minimum distance of 15cm between the radiator and your body. This equipment must not be co-located or operating in conjunction with any other antenna or transmitter.
Disk check wireless charging
-
Description:
wireless charger for smartphones under the QI standard. Easy to charge your phone without cables, just put your phone on the charging plate. -
• Specifications:
- Input: According to the printing on the back cover of the charging plate.
- Output: 5V, 1Amax. Compatible with the QI standard.
-
Package contents:
Wireless charging plate Adapter or Power cable -
Power supply:
The charger is recommended to power by a qualified AC adapter. -
Operation:
Connect the wireless charger to an outlet such as a qualified AC adapter, then a LED light is lit. Put your phone on the charging plate and the battery starts to charge, the LED light blinks during charging.If the phone deesn’t start to charge, please try to reposition it.
FCC Warning
Labeling requirements.
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two
conditions:
- This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Information to the user.
Any Changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.
Information to the user.
Note: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates uses and
can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and the receiver.
- Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
FCC RF Radiation Exposure Statement:
- This Transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.
- This equipment complies with RF radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance 15cm between the radiator and your body.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>