sunsky EDA006065401A Intelligent Solar Energy Alert PTZ Camera User Manual
- May 15, 2024
- sunsky
Table of Contents
sunsky EDA006065401A Intelligent Solar Energy Alert PTZ Camera
Product Specifications:
- Lens: White/IR LED
- PIR Sensor: Yes
- Photosensitive Microphone: Yes
- Solar Panels: Included
- LED Type: IR LED
- Power Source: Solar
Product Usage Instructions
Setting Up the Device:
- Connect the device to a power supply.
- Ensure your mobile phone is connected to an available Wi-Fi network.
- Press ‘Setup device’ on the device.
Pairing the Device:
- Power on the device and wait for the blue LED light and voice prompt.
- The device will enter pairing mode indicated by the voice prompt.
Troubleshooting:
If you encounter any issues during setup or pairing, refer to the product
manual for troubleshooting steps or contact customer support.
Frequently Asked Questions (FAQ):
Q: How do I know if the device is successfully paired?
A: The device will provide a confirmation prompt or notification once it
is successfully paired with your mobile phone.
Q: Can the device be used indoors?
A: While the device is designed for outdoor use with solar panels, it may
also function indoors provided it receives sufficient light for charging.
PRODUCTS & PACKING LIST
Packing list:
Product Diagram
Installation Process
- Solar panel: Connect panel to camera, and fix it with screws in a suitable angle.
- TF card installation: Open the silicon flap and insert the TF card.
- Power on : Press the power switch to turn ON/OFF the camera, then make sure to close the silicon flap to avoid rain leakage.
- Make sure both camera power cable and solarpanel power cable are connected.
INSTALLATION
lntergrated installation
Separated installation
APP INSTALLATION
Scan the following QR codes or seach for “UBox” from the App Store(for iOS devices) or Google Play Store (for Android smartphones) to download and install the app.
APP REGISTRATION
-
Open the app then input your E-mail address then press ‘Register’.
Check and select to agree the agreement then your E-mail box will get an verification code.( For better user’s experience, please allow to open all pennissions to avoid missing any notifications from the app.) -
Input the “Verification code” and press ‘Next’. (if you not found the mail you might find the code in your email spam box. )
-
Set the login password and confrim the login password. Then press ‘Register’ to next step.(For your password safety, the password requires more than 8 characters plus a combination of letters)
-
Enter your E-mail address, and input your login password. Then press ‘Login’.
WI-FI CONNECTION
-
Press ‘Add Family’ then set the room or position as per reminders.
-
Enter your family name and then press ‘Next’.
-
Input the necessary information just like Country, Province, then press ‘Done’.
-
Press ‘Add a device’ to add a smart device
-
Connect the device with power supply, and make sure your mobile phone isconnected to an available Wi-Fi. Then press ‘Setup device’
-
After the power on the device, wait for the blue LED and voice prompt
The device is waiting for pairing, Which means your device is in pairing mode -
If you did not hear the voice prompt, please press the RESET button until the blue indicator to lighup and then release. The device will reboot and enter the pairing state.
-
The app will input the Wi-Fi name automatically, please input the correct Wi-Fi Password. Then you can choose the ‘QR code configuration’ or ‘Sound wave configuration’ .
-
Sound wave configuration:Make sure camera and mobile phone within 1M distance,you will hear the wave sound DI DI,follow the tips showed in the mobile to finish configuration.
-
QR code configuration: Select the QR code configuration then the mobile phone display a QR code. Use the device to scan to the QR code 10cm away from the mobile phone.
-
Select the family name or device location then press ‘Done.’
-
The device will enter to the device list automatically. Setup success! The device is ready to use.
DEVICE SETTING
Click the “Calendar” icon on the right top corner, then choose the date to playback the vicoes from cloud storage.
Choose the desired date to check all videos from the cloud.
SPECIAL NOTES!
-
The device is equipped with a rechargeable lithium battery. The battery life will be affected by the device wake-up time and the number of wake-ups. Therefore, the PIR sensor alarm detection function is used in an environment with a lot of people. It is recommended to turn off or set the device to low sensitivity to reduce device wake-up and call times extend battery life.
When the battery is low, please charge the battery immediately. -
Keep the device in range of your router.Make sure the device is placed close to the Wi-Fi router.
If there has to be thick or insulated objects between the device and the Wi-Fi router, which may lead to weak Wi-Fi signal, please make sure the Wi-Fi signal is in good level before you start using the device. -
It is a delicated device with low power consumption design. Everytime the device is awakened and will work for few seconds. After that, the device will enter standy mode to save power. You can set the work time in the app settings.
-
Because the mainland China does not receive Google’s system push messages, you need to open the app’s self-starting function in your phone to receive push messages.
-
This device provides one month of free cloud storage services. If you need to continue using value-added services after the trial period expires, you need to purchase them in the app.