milleteknik PoE Switch 4p M Owner’s Manual
- September 13, 2024
- Milleteknik
Table of Contents
- milleteknik PoE Switch 4p M Owner’s Manual
- PoE
- Name, article number and e-number
- Description
- Area of use
- Technical description
- Voltage, current and power
- Load outputs
- Alarm
- Protection
- Fuses
- Indications and communication
- Battery and battery type
- Backup operating time on batteries
- Enclosure
- Weight
- Installation requirements
- Requirements that the product meets
- Limitations
- Guarantee
- Expandable, options and accessories
- Manufacturing, lifespan, environmental impact and recycling
- Link to the latest information
- Miscellaneous
- About this information
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
milleteknik PoE Switch 4p M Owner’s Manual
2024-07-09
PRODUCT SHEET – POWER SUPPLY FROM MILLETEKNIK
PoE
PoE Switch 4p M
PoE switch with 4 PoE ports.
Name, article number and e-number
Name, article number and email number.
Name| Article number|
E-number
(SV)
---|---|---
PoE switch 4p M| ME01C10048P02504PU| 51 719 51
PoE Switch
Managed 8p
FLX L| FL01N10224P25008PM| 51 729 48
Description
Primary switched four port PoE power supply with battery backup 48 V, 125 W with room for four 7 Ah batteries.
Area of use
Power supply with backup power to power PoE devices such as surveillance cameras and other PoE powered devices. A plate for keystone mod ules makes the installation of PoE devices easier.
Batteries drive, for example, the access system, when the power grid goes down.
Long life, energy efficient and support is available if something goes wrong, now or in 10 years.
Technical description
Plate for attachment of Keystone modules.
100 Mbit ports.
Constant output voltage, 48 V, regardless of bat tery or mains operation, which means that the en tire battery capacity can be used.
More compact battery backup that take up less space.
Voltage, current and power
Mains voltage: 230 V AC – 240 V AC, 47 Hz – 63 Hz.
Voltage out: 54.6 VDC
Output voltage in battery operation: 54.6 – 41 V.
Current: 2.5 A
Charging current: max. 0.5 A
Power: 150 W.
Max power per port: 30.8 W.
Number of PoE Ports: Four + two ethernet non-PoE.
Load outputs
PoE switch can drive load. Load output to drive other applications is missing.
Alarm
Alarm, one output, for delayed mains failure alarm (52.8V) or low battery voltage (48V).
Protection
Protection against overload, overvoltage, overtemperature, short circuit and deep discharge.
Controlled charging of batteries protects against overcharging and extends the life of batteries. Bat teries are charged with the most
Fuses
Mains fuse: 2.5 A.
Load securing: Fuse on supply to PoE switch : 10A.
Battery fuse: 16 A and 30 A.
Indications and communication
LED displays information and alarms on the circuit board and on the enclosure door.
PoE power supply can not as an option, communicate via protocol (RS-485/I2C) against UC. (ASSA ABLOY, RCO, Sentrion, Unison, Bravida, Vander bilt/ACRE and Tidomat – this can only be set from the factory and cannot be changed by users or technicians).
Battery and battery type
4 pieces, 7.2 Ah, battery.
Battery type: 12 V, AGM lead-acid battery, maintenance-free. Batteries not included.
Backup operating time on batteries
The reserve operating time in battery operation depends on how large a load is connected to the power supply. If the load varies, as with fre quent opening of door locks, the time that batter ies can continue to power the security system decreases. To get an estimate of reserve operat ing times see: www.milleteknik.se/Manualer/FaQ/Reservdrifttider/
Enclosure
Sheet metal cabinet for wall mounting, powder coated white. Five cable entries. Cable tie holder in enclosure.
Dimensions, fan and IP class.
Dimensions, height x
width x depth|
[sv] HE
|
Built-in
fan
| IP class
---|---|---|---
272 x 334 x 115 mm| 7| No| IP20
Weight
Weight.
Name | Net weight | Weight incl. packaging |
---|---|---|
PoE switch 4p M | 6 kg | 6 kg |
Installation requirements
The device is intended for fixed installation. The unit must be installed indoors, environmental class 1, ambient temperature: +5°C to +40°C. Recommended ambient temperature is +15°C to +25°C (for optimal battery life).
Requirements that the product meets
The product meets the following requirements.
EMC: | EMC Directive 2014 / 30EU |
---|---|
Electricity: | Low voltage directive: 2014/35 / EU |
PoE: | IEEE 802.3af, IEEE 802.3at/30.8 W Note that |
802.3at type2 is not supported, as the PoE card
lacks a handshake function for type 2.
CE:| CE directive according to: 765/2008
Limitations
IMPORTANT
Note that 802.3at type2 is not supported, as the PoE card lacks a handshake function for type 2.
Read more.
The product is tested and verified against Axema access systems and Dinbox access systems and is therefore recommended for use only with these systems. The product is currently not recommended for other products that have an af/at handshake procedure. The product deviates from standard IEEE 802.3af per port and IEEE 802.3at as the power is modified to be used together with Axema passer system and Dinbox passer system, which leads to shortcomings, (PoE- connected product does not start), against products that require handshake.
Guarantee
The product has a two-year warranty against manufacturing defects. Batteries and wearing parts are not covered by warranty.
Expandable, options and accessories
The product cannot be expanded.
Manufacturing, lifespan, environmental impact and recycling
Manufactured by Milleteknik in Partille, Sweden.
The product is designed and constructed for a long service life, which reduces the environmental impact. The life of the product (except wearing parts) depends on, among other things, environmental factors, mainly ambient temperature, unforeseen load on components such as lightning strikes, external impact, handling errors, etc. Products are recycled, simply because they are modular, by being left at the nearest recycling station or sent back to the manufacturer.¹ Contact your distributor for more information.
¹Costs incurred in connection with recycling are not reimbursed.
Link to the latest information
Products and software are subject to updates, you will always find the latest information on our website.
PoE
Miscellaneous
The difference between PoE, PoE+ and PoE++.
Max power PoE.
– | PoE | Poe+ | PoE++ |
---|---|---|---|
Official name | IEEE | ||
802.3af | IEEE | ||
802.3at | IEEE |
802.3bt
Maximum
power| 13 W| 25 W| 71 W
Compatiblea.| –| PoE| PoE, PoE+
a. The power supply follows “up”, but not “down”. A PoE can never power a PoE+/PoE++ device that requires more than 13 W.
About this information
All information is published subject to possible errors. Information is updated without prior notice.
Milleteknik AB, Ögärdesvägen 8 B, 433 30 Partille
www.milleteknik.se
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>