milleteknik A-AL1224ECO01 ECO Mains Failure Alarm Card Installation Guide
- June 10, 2024
- Milleteknik
Table of Contents
milleteknik A-AL1224ECO01 ECO Mains Failure Alarm Card Installation Guide
ABOUT
ECO mains failure alarm card is an alarm card for monitoring mains failure. The alarm card can be inserted into 24 V battery backups ECO M and ECO FLX S.
INSTALLATION AND CONNECTION
- Mount the card on the motherboard in the battery backup.
- Connect the mains.
ECO Main failure alarm card
Push the card down onto the motherboard in the battery backup.
Connect Phase, Neutral and Ground as the picture shows.
| No | Explanation |
|---|---|
| 1 | Terminal that meets motherboard in battery backup, protective earth (PE), |
Neutral (N), Phase (F).
2| Terminal for incoming mains, protective earth (PE), Neutral (N), Phase (F).
3| Alarm output, NO/CO/NC.
Warning
Do not cross cables – risk of equipment damage
TECHNICAL DATA
| Item number | A-AL1224ECO01 card |
|---|---|
| Product description | Alarm card for ECO M and ECO FLX S. Alarm on changing |
relay.
Measure| 21 x 55 x 42 mm
Own energy consumption| N/A
Tension, in| 27.3V DC
Alarm output:| Mains failure NC/CO/NO
Technical data
Recommended environ- ment| Environmental class 1, Indoor, 20% ~ 90% relative
humidity
The products meet the requirements according to| EMC Directive 2014/30EU, Low
Voltage directive: 2014/35/EU CE directive according to 765/2008, Emission:
EN61000-6-:2001, EN55022:1998:-A1:2000, A2:2003 Class B, EN61000-3 -2:2001.
Immunity: EN61000-6-2:2005, EN61000-4-2, -3, 4, -5, -6, -11.
Technical data
Guarantee| 2 years
Manufactured in Milleteknik’s factory in Partille, Sweden.
This translation is not verified and should be cross referenced with the
swedish original before use.
User manual article number: 350-243
This document is subject to change without notice.
All information is published subject to typographical errors.
ADDRESS AND CONTACT DETAILS
Milleteknik AB
Ögärdesvägen 8 B
S-433 30 Partille
+46 31 340 02 30
www.milleteknik.se