ACROMA 8906AZ 6-Light Modern Sputnik Chandelier Instruction Manual
- June 12, 2024
- ACROMA
Table of Contents
ACROMA 8906AZ 6-Light Modern Sputnik Chandelier
Product Information
This product is a lighting fixture that requires installation. It has a maximum wattage of 60W per candelabra base. The product comes with a one-year warranty. The manufacturer provides safety information and instructions for installation. The product includes hardware such as a mounting plate, support screws, outlet box screws, wire connectors, finials, a canopy, a downrod, hexagon screws, a spanner, and a nipple package.
Product Usage Instructions
Before starting the installation process, it is important to read all instructions provided. To prevent damage to the product, place it on a soft, non-abrasive surface such as carpet or cardboard.
Tools Required (Not Included)
- Phillips Screwdriver
- Safety Goggles
- Wire Stripper
- Electrical Tape
- Pliers
Pre-installation Steps
- Disconnect the power by turning off the circuit breaker, removing the fuse at the fuse box, or tripping the breaker that controls the circuit.
- Tape a sign to the panel warning others not to touch the circuit while you work.
- If you have any electrical questions, consult a qualified electrician.
- If you have non-electrical questions, contact customer service via the distributor where you purchased the product.
Assembly Instructions
- Determine the length of the stem or chain required for installation.
- Attach the mounting plate to the junction box using the provided support screws and outlet box screws.
- Make all necessary electrical connections following the wiring instructions:
- Connect the white supply wire to the white or identified fixture wire using wire nuts.
- Connect the black supply wire to the plain or black fixture wire using wire nuts.
- Connect the bare or green ground wire from the supply to the bare or green fixture ground wire. Use the provided green ground screw.
- Hang the fixture from the ceiling.
- Install the finials and canopy as instructed.
Ensure that you read the wiring and grounding instructions, as well as any additional directions provided. Turn off the power supply during installation. If new wiring is required, consult a qualified electrician or local authorities for code requirements.
Safety lnformation
READ AND SAVE THESE INSTRUCTIONS
- For your protection and safety,carefully read and understand the information provided in this manual completely before attempting to assemble,install,or operate this product.Failure to do so could lead to electrical shock,fire,or other injuries that could be hazardous or even fatal.
- Before touching any wire,use a voltage tester to make sure it not live.
- When replacing fuses,turn off the main power firs.Make sure your hands and feet are dry,and place one hand behind your back to prevent electricity from making a complete circuit through your chest. Touch the plug fuse only by its insulated rim.Remove cartridge fuses with a fuse puller.
- Use tools with insulated handles and ladders made of wood or fiberglass.
- To protect children,place a safely cover over any unused outlet
DANGER :Before staring installation of this fixture orremoval of a
previous fixture,disconnect the power by turning off the circuit
breaker,removing the fuse at the fuse box,or tripping the breaker that
controls that circuit.Tape a sign to the panel warning others to leave the
circuit alone while you work.
CAUTION: CONSULT A QUALIFIED ELECTRICIAN IF YOU HAVE ANY ELECTRICAL
QUESTIONS. lf you have any non-electrical questions about this fixture please
contact our customer service via the distributor where you purchased this
product from. We will be more than happy to assist.
Pre-lnstallation
PLANNING INSTALLATION
Read all instructions before installing.
To avoid damaging this product, place it on a soft, non-abrasive surface, such
ascarpet or cardboard.
TOOLS REQUIRED
(NOT INCLUDED)
Warranty
ONE (1) YEAR WARRANTYWHAT IS COVERED
The manufacturer warrants this fixture to be free from defects in materials
and workmanship for a period of one (1) year from date of purchase.The
warranty applies only to the original consumer purchaser and only to products
used in normal use and service. If this product is found to be defective,the
manufacturer’s only obligation,andyour exclusive remedy,is the repair or
replacement of the product at manufacturer’s discretion, provided that the
product has not been damaged through misuse, abuse, accident, modifications,
alteration,way not in accordance with the instructions supplied with the
product.This warranty shall not apply toa failure of the product as a result
of an accident, misuse, abuse, negligence, alteration,faulty installation,or
any other failure not relating to faulty materialor workmanship. This warranty
shall not apply to the finish on any portion of the product, such as surface
and/or weathering,as this is considered normal wear and tear.
WHAT IS NOT COVERED
The manufacturer does not warrant and specifically disclaims any
warranty,whether expressed or implied, of fitness for a particular purpose,
other thanthe warranty contained herein. The manufacturer specifically
disclaims anyliability and shall not be liable for any consequential or
incidental loss ordamage, including but not limited to any labor/expense costs
involved in thereplacement or repair of said product
ASSEMBLY GUIDE
Assembly lnstructions
Assembly of this fixture will be accomplished by first determining the length
of stem or chain required, attaching the mounting plate to the junction box,
making all necessary electrical connections, hanging the fixture from the
ceiling and then installing the fixture.
Safety Warning
Read wiring and grounding instruction and any additional directions. Turn
power supply off during installation. If new wiring is required, consult a
qualified electrician or local authorities for code requirements.
HARDWARE INCLUDED
Assembly lnstructions
Thank you for choosing ACROMA
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>