WEIDEMANN 1380 Tele Wheel Loaders Instruction Manual
- June 15, 2024
- WEIDEMANN
Table of Contents
1380
Hoftrac
Technical specifications
| 1380 P-kinematics| 1380 PZ-kinematics
---|---|---
Engine data Standard| |
Manufacturer| Perkins| Perkins
Engine type| 404 D-22 de| 404 D-22 de
Cylinders| 4| 4
Engine performance (max.) kW (hp)| 31.4 (43)| 31.4 (43)
at rpm (max.) rpm| 2,600| 2,600
Cubic capacity cm³| 2,216| 2,216
Cooling system| Water| Water
Engine data Option| |
Manufacturer| Perkins| Perkins
Engine type| 404 D-22| 404 D-22
Cylinders| 4| 4
Engine performance (max.) kW (hp)| 35.7 (49)| 35.7 (49)
at rpm (max.) rpm| 2,600| 2,600
Cubic capacity cm³| 2,216| 2,216
Cooling system| Water| Water
Electric motor| |
Battery Standard| |
Battery Optional| |
Electrical system| |
Operating voltage V| 12| 12
Battery Ah| 77| 77
Alternator A| 65| 65
Weights| |
Operating weight (standard) kg| 2740-2950| 2740-2950
Tipping load with bucket – machine straight kg| 1876-2071| 1803-1948
Tipping load with bucket – machine articulated kg| 1495-1653| 1508-1657
Tipping load with pallet fork – machine straight kg| 1557-1722| 1534-1614
Tipping load with pallet fork – machine articulated kg| 1239-1368| 1270-1359
Vehicle data| |
Axle (optional)| T94 (T110, PA940)| T94 (T110, PA940)
Cab (optional)| FSD (eps, cabin)| FSD (eps, cabin)
Ground speed (optional) km/h| 0 – 20 (28)| 0 – 20 (28)
Speed stages| 2| 2
Fuel tank capacity l| 50| 53
Hydraulic oil tank capacity l| 30| 30
Hydraulic system| |
External services – Operating pressure (optional) bar| 360| 360
Steering hydraulics – Oil flow l/min| 49.4 (58.5)| 49.4 (58.5)
Steering hydraulics – Operating pressure bar| 210| 210
Drive| |
Type of drive| Hydrostatic| Hydrostatic
Traction drive| Universal joint shaft| Universal joint shaft
Noise values| |
Guaranteed sound power level LwA dB(A)| 99.9| 99.9
Specified sound pressure level LpA dB(A)| 82| 82
Tipping load calculation according to ISO 14397 (horizontal mast)
FSD = operator’s canopy
eps = Easy Protection System (fold-down operator’s canopy)
Vibrations (weighted average effective value)
Hand-arm vibrations: The hand-arm vibrations are no more than 2.5 m/s²
Whole-body vibrations: This machine is equipped with a operator’s seat that
meets the requirements of EN ISO 7096:2000.
When the loader is properly used, the whole body vibrations vary from below
0.5 m/s² up to a short-term maximum value.
It is recommended to use the values specified in the table when calculating
the vibration values according to ISO/TR 25398:2006.
At the same time, the actual use conditions have to be taken into
consideration.
Telehandlers, like wheel loaders, are to be classified by operating weight.
Type of loader| Typical operating conditions| Mean value|
Standard deviation (s)
---|---|---|---
1.4aw,eqx| 1.4aw,eqy| aw,eqz| 1.4sx| 1.4sy| sz
[m/s²]| [m/s²]| [m/s²]| [m/s²]| [m/s²]| [m/s²]
Compact wheel loader
(operating weight
< 4,500 kg)| Load & carry (load and transport work)| 0.94| 0.86| 0.65| 0.27|
0.29| 0.13
Wheel loader
(operating weight
4,500 kg)| Load & carry (load and transport work)| 0.84| 0.81| 0.52| 0.23| 0.2| 0.14
Application in extraction (harsh application conditions)| 1.27| 0.97| 0.81| 0.47| 0.31| 0.47
Delivery drive| 0.76| 0.91| 0.49| 0.33| 0.35| 0.17
V-operation| 0.99| 0.84| 0.54| 0.29| 0.32| 0.14
Dimensions
| Standard tyres 10.0 / 75 – 15.3 AS ET80| 4,420 mm| 4,581 mm
---|---|---|---
A| Total length| 3,520 mm| 3,700 mm
B| Total length (without bucket)| 560 mm| 720 mm
C| Axle middle to bucket pivot pin| 1,732 mm| 1,732 mm
D| Wheelbase| 1,182 mm| 1,182 mm
E| Rear overhang| 2,260 mm| 2,260 mm
F| Height to top of overhead guard fixed| 2,370 mm| 2,370 mm
| Height to top of overhead guard foldable (eps)| 1,850 mm| 1,850 mm
| Height to top of overhead guard foldable, folded (eps)|
| | |
H| Height to top of cabin| 2,280 mm| 2,280 mm
J| Seat top height| 1,280 mm| 1,280 mm
K| Total working height| 3,659 mm| 3,830 mm
L| Height of bucket pivot (max.)| 3,010 mm| 3,203 mm
M| Load-over height| 2,690 mm| 2,880 mm
N| Dumping height| 2,130 mm| 2,380 mm
O| Operating distance for M| 250 mm| 410 mm
P| Digging depth| 83 mm| 130 mm
Q| Total width| 1,040 mm| 1,040 mm
S| Track width| 780 mm| 780 mm
T| Ground clearance| 250 mm| 250 mm
U| Maximum radius external| 3,040 mm| 3,120 mm
V| Radius at the outer edge| 2,792 mm| 2,792 mm
W| Inside turning radius| 1,610 mm| 1,610 mm
X| Inclination angle| 48 °| 48 °
Y| Rollback angle at max. lifting height| 43 °| 57 °
Z| Dumping angle (max.)| 42 °| 37 °
| Rollback angle (on the ground)| 51 °| 50 °
Standard features
Engine
- Perkins 404 D-22 de (31.4 kW / 43 hp)
Loader unit
- P-kinematics (lift height 3010 mm)
Drive system
- Axle T94, hydrostatic medium-pressure 4 wheel drive
- Hydrostatic 4 wheel drive, travel direction can be selected via joystick
- Service brake: Hydrostatic drive system acting on all 4 wheels (wear-free)
- Central service and parking brake in the drive train acting on all 4 wheels
- Tyres 10.0/75–15.3 AS ET80
Steering system
- Hydraulic articulated pendulum steering, 12° oscillating angle
Hydraulics
- 3rd control circuit front DN12
- Hydraulic oil cooler
- Lock for control valve
- Floating position for lift and tipping cylinders
Operator’s cab
- Operator’s canopy with retaining system roll-over protective structure / FOPS-tested, including rear window, laterally tiltable operator’s cab
- Comfort seat with safety belt, fully suspended, weight, back and horizontal adjustment
- Joystick with direction control switch and integrated touch button for differential lock
- Adjustable steering column
Other
- Work lights (2 front, 2 rear)
- Operating hour meter
- Battery isolator switch
- Fuel display
- Mechanical quickhitch system for attachments
Options
Engine
- Perkins 404 D-22 (35.7 kW / 49 hp)
- Engine pre-heater (coolant), hydraulic oil pre-heater 230 V
Loader unit
- P-kinematics (high lift height 3200 mm)
- PZ-kinematics (lift height 3203 mm)
Operator’s cab
- Roof lining for operator’s canopy
- Front window complete with wiper
- eps (Easy Protection System): fold-down operator’s canopy
- 2-door cabin, including heater and ventilation
- Cabin plug receptacle 230 V
- Right armrest
- Air-cushioned comfort seat (artificial leather / fabric)
- Heated seat
- Radio
Lighting
- Additional work lights on load arm
- Lighting according to Road Traffic Regulations
- MEGA work lights (2 front, 2 rear)
- LED work lights (2 front, 2 rear)
- Rotating beacon
Drive system / Axles
- Axle T94, hydrostatic medium-pressure 4 wheel drive
- Axle T94, hydrostatic high-pressure 4 wheel drive
- Axle T110, hydrostatic high-pressure 4 wheel drive
- Axle PA940, planetary axle, hydrostatic high-pressure 4 wheel drive
- Differential lock 100%
- Chassis elevation (30 mm)
- Speed increase to 28 km/h
- Hand inching (creep speed controller)
Hydraulics
- Unpressurised reverse travel (front / rear)
- Work hydraulics of large pump (58.5 l/min)
- 3rd control circuit, including single latch on lever for 3rd control circuit
- 3rd comfort control circuit, including single latch on lever for
- 3rd control circuit 4th comfort control circuit, including single latch on lever for
- 3rd control circuit 4th additional control circuit, including separate control valve (operation: via separate lever)
- 4th additional control circuit, including separate control valve (operation: Via switch (1 – 0 – 2) in steering column)
- 4th control circuit (40 l/min) additionally via separate gear pump, including separate control valve
- 4th control circuit additionally via
- 4-way valve Notch for joystick, single
- Additional, rear dual-acting hydraulic connection, including separate control valve (operation: Via lever)
- Additional, rear dual-acting hydraulic connection, including separate control valve (operation: via switch)
- Also single-acting, rear hydraulic connection
- Also a dual-acting, rear hydraulic connection (operation: via lever for 3rd control circuit).
- Three-point rear receptacle, category I
Electrical connections
- Plug receptacle in front, triple-pole (single or dual function)
- Plug receptacle for rear attachments, 7-pin
Other
- Hydraulic quickhitch system for attachments
- Counterweight (floor plate 97 kg)
- Cast iron rear weight (138 kg)
- Reversing alarm
- Load-lowering valve
- Combination case with warning triangle and first-aid kit
- Switch position indicator
- Tool box
- TÜV expert’s report for road travel (addendum in vehicle documentation)
- Fully automatic central lubrication unit
- Custommade paint finish
- Hand lever grease gun
- Lifting arm damping
- Self-recovery coupling
- Automatic trailer coupling
- Approval as self-propelled work machine with ball hitch
- Official approval for road use
Please note
that product availability can vary from country to country. It is possible
that information / products may not be available in your country. Photos may
depict options. Subject to change without notice. Errors and omissions are
reserved. The contractual agreement is expressly decisive. More detailed
information on engine power can be found in the operator’s manual; the stated
power may vary due to specific operating conditions. Subject to alterations
and errors excepted. Applicable also to illustrations. Copyright © 2017
Weidemann GmbH.
www.weidemann.de 25.08.2017
https://tractormanualz.com/
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>