milleteknik NOVA FLX S Multi Battery Box Instruction Manual
- June 1, 2024
- Milleteknik
Table of Contents
milleteknik NOVA FLX S Multi Battery Box Instruction Manual
SSF1014 certified battery backup with communication
NOVA FLX S
NOVA FLX S can be mounted on a wall or in a 19″ rack.
Name, article number and e-number
Description
Primary switched battery backup, 24 V, 5 A, with room for two 7.2 Ah or two 14
Ah batteries.
Primary switched battery backup, 24 V, 10 A, with room for two 7.2 Ah or two
14 Ah batteries.
Area of use
NOVA supplies power to access systems, alarm systems or other security products in a building that are powered by 12 V or 24 V DC. The rectifier in the power supply converts 230 V DC down to 12 V DC or 24 V DC. NOVA 24 V power supply is certified to be used in security facilities that must comply with SSF 1014, all the way from alarm class 1 up to alarm class 4.
Batteries drive, for example, the access system, when the power grid goes down.
Long life, energy efficient and support is available if something goes wrong, now or in 10 years.
Voltage, current and power
Mains voltage: 230 V AC – 240 V AC, 47 Hz – 63 Hz.
Voltage out: 27.3 VDC, (24 V).
Charging current: 5 A. 10 A.
Power outlet: 5A. 10 A.
Load outputs
Two load outputs.
Fuses
Mains fuse: 2.5 A.
Load securing: 5 A. 10 A.
Battery fuse: 16 A and 30 A.
Battery and battery type
2 pieces 7.2 Ah battery.
2 pieces, 14 Ah, battery.
Battery type: 12 V, AGM lead-acid battery, mainte- nance-free. Batteries not
included.
Backup operating time on batteries
The reserve operating time in battery operation depends on how large a load is connected to the power supply. If the load varies, as with frequent opening of door locks, the time that batteries can continue to power the security system decreases. To get an estimate of reserve operating times see: www.milleteknik.se/Manualer/FaQ/Reservdrifttider/
Enclosure
Sheet metal cabinet for wall mounting or in a 19″ rack cabinet (5 HE). Powder- coated black. Four cable entries on the top and outlet holes on the back. Cable tie holder in enclosure.
Weight
Installation requirements
The device is intended for fixed installation. The unit must be installed indoors, environmental class 1, ambient temperature: +5°C to +40°C. Recommended ambient temperature is +15°C to +25°C (for optimal battery life).
Standards that product (s) meet and are approved for
SSF
Certificate and certificate number
Area of use
NOVA is mostly used for: Access systems, fire alarms, burglar alarms, (integrated security sys- tems), in public environments such as schools, offices and commercial properties.
The unit meets the requirements for installation in systems that must be SSF 1014 approved. SSF 1014 certificate is only valid for certification together with a higher-level system.
1Costs incurred in connection with recycling are not reimbursed.
IMPORTANT
In order for the SSF 1014 certificate to be valid, only one (1) load output
may be used.
Limitations
In order for the certificate, which applies to all NO- VA 24 V, to be maintained, UPLUS 10+ Design Life AGM batteries must be used.
Guarantee
The product has a five-year warranty against manufacturing defects. Batteries and wearing parts are not covered by warranty.
Expandable, options and accessories
The produckt can be expanded with two pieces: 2+2 Output module or 5 Output module or 10 Out- put Module or 8 Output control module or Fire module 4 outputs or Voltage Converter 24V-12V 2A or Voltage Converter 24V-12V 6A.
Tamper switch
Plate for attaching the tamper switch to the wall to meet the alarm class for FLX S and FLX M and FLX L.
Relay card for alarm via switching relay instead of communication. Relay card
NOVA Series (5A and
10A-PRO3) Relay card NOVA Series (15A and 25A-PRO2V3)
Manufacturing, lifespan, environmental impact and recycling
Manufactured by Milleteknik in Partille, Sweden.
The product is designed and constructed for a long service life, which reduces the environmental impact. The life of the product (except wearing parts) depends on, among other things, environmental factors, mainly ambient temperature, unforeseen load on components such as lightning strikes, external impact, handling errors, etc. Products are recycled, simply because they are modular, by being left at the nearest recycling station or sent back to the manufacturer.1Contact your distributor for more information.
Link to the latest information
Products and software are subject to updates, you will always find the latest information on our website.
NOVA
About this information
All information is published subject to possible errors. This document is updated without notice.
Milleteknik AB, Ögärdesvägen 8 B, 433 30 Partille
www.milleteknik.se