Ford F-150 Tail Light Knight Installation Guide
- September 19, 2024
- Ford
Table of Contents
F-150 Tail Light Knight
Product Information
Specifications:
- Material: Stainless steel
- Fastener Size: 8mm
- Additional Tools: Torx L keys (included)
Product Usage Instructions
Installation Steps:
-
Remove the original 8mm tail light fasteners using the Torx L
key provided. Replace them with the new stainless steel Torx
fasteners. -
Utilize the larger t50 Torx L key to remove the tailgate latch
pin and cable bolt. Align the Tail Light Knight to the respective
holes, ensuring the rectangular hole is on top. -
Apply the included thread locker on the latch pin and cable
bolt threads. Reinstall them using the t50 Torx key, remembering to
leave enough thread locker for the second side. -
Close your tailgate slowly to check that everything is
installed correctly and nothing is hitting or interfering.
Frequently Asked Questions (FAQ)
Q: Can I use the Tail Light Knight on a different vehicle?
A: The Tail Light Knight is specifically designed for
compatibility with a certain model of vehicle. It is recommended to
check with the manufacturer for compatibility with other
vehicles.
Q: How do I clean the Tail Light Knight?
A: To clean the Tail Light Knight, use a mild detergent and
water solution with a soft cloth. Avoid using abrasive cleaners
that may damage the finish.
Tail Light Knight Installation instructions
1. Remove original 8mm tail light fasteners and replace original fasteners
with the new stainless steel Torx fasteners and included Torx L key
2. Use the included larger t50 Torx L key to remove the tail gate latch pin
and cable bolt, align the Tail Light Knight to the respective holes, with the
rectangular hole on top.
3. Apply the included thread locker on the latch pin and cable bolt threads,
and reinstall with the t50 Torx key (remember to leave enough thread locker
for the second side).
4. Close your tailgate slowly and ensure that everything is installed
correctly and nothing is hitting or interfering.