Serafim A1 High CP Value Gaming Headset User Manual

June 12, 2024
Serafim

Serafim A1 High CP Value Gaming Headset

Serafim-A1-High-CP-Value-Gaming-Headset-product

Product Audio Box Features

  • Main power switch (the RGB cycle light will appear when it is turned on, and the blue light will be steady when the Bluetooth is connected)
  • 3D surround function turns on the indicator light
  • Bass enhanced function indicator
  • Headphone LED light power supply USB interface (this interface only provides the power supply function of the headphone LED light)
  • 3.5mm audio output interface
  • Volume up key
  • Volume down key
  • Microphone mute switch
  • Micro USB charging port
  • Bass enhancement function switch key
  • 3D surround function switch key
  • Headphone LED light switch key

Disclaimer

No part of this manual, including the products and software described in it, may be reproduced, transmitted, transcribed, stored in a retrieval system, or any without the express written permission of Serafim Tech. Inc.

Product Warranty

This product has a one-year Serafim warranty service. The warranty does not cover the following cases:

  1. The product is repaired, modified, or altered without written authorization from Serafim.
  2. The warranty period starts from the actual day of purchase as reflected on the authorized reseller’s or distributor’s invoice/receipt.
  3. If part of the description is different from the picture due to factors such as the official software upgrade of Serafim Audio APP or the change of product appearance, Shuoqing Technology will not be liable and reserves the right of final interpretation.

Package Contents

Serafim-A1-High-CP-Value-Gaming-Headset-fig-1

  • A. Headphone
  • B. Audio Box
  • C. 3.5mm audio source output cable and headphone LED light USB power supply cable
  • D. Detachable microphone
  • E. 2 In 1 3.5mm Audio Cable Female To Male
  • F. Micro USB charging cable

Component Names

Headphone

  • A. Adjustable headband with padded head
  • B. Circular RGB Logo light
  • C. Soft foam ear cushions
  • D. Detachable microphone (note that the microphone interface is directional)

Serafim Audio

Audio Box main power light introduction

  • Bluetooth connection: Blue is always on.

  • No Bluetooth connection: RGB cycle light.

  • Low battery warning: red light flashes.

  • Charging: Red is always on, the red light is off when the battery is full

  • A. Main power switch (the RGB cycle light will appear when it is turned on, and the blue light will be steady when the Bluetooth is connected)

  • B. 3D surround function turns on the indicator light

  • C. Bass enhanced function indicator

  • D. Headphone LED light power supply USB interface (this interface only provides the power supply function of the headphone LED light)

  • E. 3.5mm audio output interface

  • F. Volume up key

  • G. Volume down key

  • H. Microphone mute switch

  • I. Micro USB charging port

  • J. Bass enhancement function switch key

  • K. 3D surround function switch key

  • L. Headphone LED light switch key

Disclaimer

Copyright©

© Serafim Tech. Inc. All rights reserved.

No part of this manual, including the products and software described in it, may be reproduced, transmitted, transcribed, stored in a retrieval system, or any without the express written permission of Serafim Tech. Inc.

For any future information please visit Serafim official website:

Serafim-A1-High-CP-Value-Gaming-Headset-fig-4

you encounter any problems we would be glad to answer all your concerns at

Serafim-A1-High-CP-Value-Gaming-Headset-fig-5

Warranty

This product has one-year Serafim warranty service, only in these following cases should not be content into warranty of Serafim:

  1. The product is repaired, modified or altered, unless such repair, modification or alteration is authorized in written form by Serafim.
  2. In all cases the commencement date for the period is one year since the actual day of purchase, as reflected on the authorized reseller’s or distributor’s invoice / receipt provided to you.
    • If part of the description is different from the picture due to factors such as the official software upgrade of Serafim Audio APP or the change of product appearance, Shuoqing Technology will not be liable and reserves the right of final interpretation.

Platform connection

Serafim-A1-High-CP-Value-Gaming-Headset-fig-6

Android/iOS

  • Use the 3.5mm adapter or the 3.5mm interface on the device to connect it to use

Xbox one/Xbox series s/ Xbox series x

  • PlayStation 4/ PlayStation 5/ Nintendo Switch
  • Use the 3.5mm audio cable connector to connect to the game controller

PC/Laptop/ Mac/Linux

  • Use the included 2 In 1 3.5mm Audio Cable to connect to the 3.5mm interface or directly use the 3.5mm audio cable to connect to it.

Serafim Audio APP Features

Android / iOS

Serafim-A1-High-CP-Value-Gaming-Headset-fig-8

  1. Download and install Serafim Audio from the mobile phone to Google Play/APP Store.
  2. After turning on the Bluetooth function of the phone and the power of Serafim Audio Box, tap Serafim Audio to log in and it will automatically search for device pairing.
  3. After entering Serafim Audio, you can turn on the equalizer and adjust the EQ equalizer parameters, as well as the 3D and BASS functions according to your needs.
  4. After adjusting the equalizer parameters, press the “+” icon to enter a name to save the current solution. Swipe left on the name of the saved plan to delete the plan.
  • The parameters set by the Serafim Audio APP will be changed according to the user’s button adjustment on the Serafim Audio Box
  • When the Serafim Audio APP is closed, the Serafim Audio Box will be defined by the parameters adjusted by the last APP.

Specifications

Headphone

  • Driver: Dynamic, 50mm with neodymium magnets
  • Type: Circumaural, Closed back
  • Frequency response: 20Hz–2kHz
  • Impedance: 21 Ω
  • Sound pressure level: 109dBSPL/mW (1kHz)
  • T.H.D: < 15%
  • Weight: 310g
  • Weight with mic: 320g
  • Cable length and type: USB charge cable (1m)
  • Connector: Headphone-3.5mm (4-section type)+USB

Microphone

  • Element: Electret condenser microphone
  • Polar pattern: Omnidirectional, Noise-cancelling
  • Frequency response: 100Hz-10000 Hz
  • Sensitivity: -42±3 dB
  • Impedance: 2.2kΩ

Audio Box

  • Battery capacity: 550mAh
  • usage time (headphone LED off): 8hr*
  • usage time (headphone LED on): 3.hr*
  • Charging time: 3hr(0%-100%)
  • Weight: 70±2 g
  • Cable length: 1 m

The use time will vary due to factors such as user habits or volume.

Safety Notes

  • If you encounter problems with the correct operation of the device, and the troubleshooting does not help, please unplug the device and contact our online customer service, or go to https://serafim-tech.com/contact for support. Do not try to disassemble or repair this device yourself under any circumstances, otherwise the warranty will be invalid.
  • In order to maintain the sound quality of the device, when using the device and charging at the same time, do not charge with low-current power sources, such as low-voltage charging devices, computer USB ports.. etc.
  • Keep the device away from liquid or any humid environment. Operate this device within the ideal temperature range (0°C (32°F) to 40°C (104°F)). If the temperature is out of the ideal range, turn off the device until the temperature returns to the ideal range.
  • Do not use it at excessive volume for a long time, otherwise it may damage your hearing. In addition, the laws of some countries/regions stipulate that in an environment that affects hearing and has a sound volume of 86 decibels, you may not stay for more than 8 hours a day. Therefore, it is recommended that if you want to use the headset for a long time, turn down the volume as much as possible. Please be sure to maintain your hearing health.
  • Audio Box has a built-in rechargeable lithium battery. Generally speaking, the service life of this battery is usually related to usage habits. If you think the included rechargeable lithium battery is exhausted (low battery), please try charging first. If the battery cannot be charged smoothly after many attempts, the battery may be out of use. Do not disassemble and replace the battery by yourself.

FCC STATEMENT

Federal Communications Commission Statement

This device complies with FCC Rules Part 15. Operation is subject to the following two conditions:

  • This device may not cause harmful interference.
  • This device must accept any interference received, including interference that may cause undesired operation.

This equipment has been tested and found to comply with the limits for a class B digital device, pursuant to Part 15 of the Federal Communications Commission (FCC) rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment causes harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by doing one or more of this manual following measures:

  • Reorient or relocate the receiving antenna.
  • Increase the separation between the equipment and receiver.
  • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
  • Consult the dealer or an experienced radio/TV technician for help.

FCC Caution

  • Any changes or modifications not expressly approved by the party responsible for compliance could void the user‘s authority to operate the equipment.
  • The antenna(s) used for this transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.

Radiation Exposure Statement

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. End users must follow the specific operating instructions for satisfying RF exposure compliance. To maintain compliance with FCC exposure compliance requirements, please follow operation instruction as documented.

Warranty Card

Product name| | Product S/N|
---|---|---|---
Purchase date| | Customer name|
Store name| | Purchase amount|

References

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

Serafim User Manuals

Related Manuals