COOPER WTA PRO Tilemount Sensor Kit Instruction Manual

: September 6, 2024
: Cooper

Table of Contents

WTA PRO Tilemount Sensor Kit
Product Specifications
Product Usage Instructions
Overview
Installation
Functionality
- FAQ
What is the purpose of the WaveLinx Tilemount Sensor Kit?
What accessories are required for full functionality of the

WTA PRO Tilemount Sensor Kit

“`html

Product Specifications

Mechanical: Tilemount Sensor Size: 2.8 x 2.8 x
1.2 (70mm x 70mm x 31mm), J-Box Sensor Size: 4.1 x 4.1 x 1.0 (105mm
x 105mm x 24mm)
Mounting Height: 15′ [4.5m] for Tilemount
installation, 8′ [2.4m] for J-Box installation

Product Usage Instructions

Overview

The WaveLinx Tilemount Sensor Kit is designed to provide motion
sensing, daylight dimming, and wireless control for connected 0-10V
luminaires that do not support the WaveLinx PRO integrated
sensor.

Installation

The Tilemount Sensor Kit can be installed above the ceiling in
an octagonal junction box. Ensure proper wiring as per the provided
wiring diagrams.

Functionality

The sensor kit offers 120-277VAC 3 amp zero crossing relay
control and continuous 0-10V dimming control for LED and non-LED
loads. It is used to provide daylight dimming and control for
downlight luminaires or other luminaires lacking integrated
sensors.

FAQ

What is the purpose of the WaveLinx Tilemount Sensor Kit?

The kit is used to provide motion sensing, daylight dimming, and
wireless control for connected 0-10V luminaires that do not support
the WaveLinx PRO integrated sensor.

What accessories are required for full functionality of the

Tilemount Sensor Kit?

The Tilemount Sensor Kit requires a WaveLinx Area Controller
(WAC) to function properly within the WaveLinx connected lighting
system.

“`

Project Prepared by

Catalog # Notes

Type Date

Ceiling tile sensor kit

Octagonal junction box installation Tilemount sensor shown above ceiling

WaveLinx
PRO Tilemount Sensor Kit (WTA)
Provides motion sensing, daylight dimming and wireless control for connected 0-10V luminaires that do not support the WaveLinx PRO integrated sensor
Typical Applications Office · Education · Healthcare · Hospitality · Retail Industrial · Manufacturing

Interactive Menu
· Order Information page 2 · Additional Resources page 3 · Connected Systems page 7 · Product Warranty

Product Certification*

Part 15/ICES-003

· Meets latest ASHRAE Standard 90.1 requirements · Meets latest IECC requirements · Meets latest CEC Title 24 requirements

Product Features

Compatibility

WaveLinx Mobile App

IEEE 802.15.4

Device Security

WaveLinx PRO

Overview

Customer Security

Daylighting Control

Occupancy Sensor

The WaveLinx Tilemount Sensor Kit is an integral part of the WaveLinx connected lighting (WCL) system and offers 120-277VAC 3 amp zero crossing relay control and continuous 0-10V dimming control of LED and non-LED loads. The intended use of the Tilemount Sensor Kit is to provide daylight dimming and control for connected downlight luminaires or other luminaires that do not support the WaveLinx integrated sensor.

The Tilemount Sensor Kit is powered by the 120-277VAC circuit it is controlling and allows simple electrical junction box mounting via ½” knock out or direct connection to the junction box attached to connected luminaire. The WaveLinx Tilemount Sensor Kit operates on a wireless mesh network based on IEEE 802.15.4 standards and is controlled by the WaveLinx Area Controller.

Product Features & Benefits
· Easily enable 0-10V luminaires to be controlled by WaveLinx PRO · 120-277VAC with 3 amp zero cross relay and 0-10V continuous dimming · 10mA 0-10V sink (refer to driver specifications to calculate quantity supported) · Mounting heights of 8 to 15ft (2.4 to 4.5m) · Provides passive infrared (PIR) motion coverage up to 500 sq-ft (46m2) · Provides closed loop daylighting control of non-integrated luminaires · Control module mounting to junction box or luminaire driver compartment · Sensor installs into 1/2 – 3/4″ (12 – 19mm) ceilings or octagonal junction boxes · Hardware capable of Real Time Location Services (RTLS) – CORE Locate license required

*T24 and RoHS are self-tested by Cooper Lighting Solutions. Not a third party certification.
PS503097EN page 1
July 2024

WaveLinx

PRO Tilemount Sensor Kit

Order Information
The Tilemount Sensor Kit is an accessory to the WaveLinx connected lighting (WCL) system and requires a WaveLinx Area Controller (WAC) for full functionality.
The wireless tilemount sensor kit is used to provide occupancy sensing and closed loop daylighting in spaces and can be mapped to other sensors in an area for maximum coverage and control. The wireless tilemount sensor kit is typically used to provide occupancy sensing and daylight dimming for luminaries that cannot include integrated occupancy and daylight sensors.

Catalog Number
Catalog Number WTA

WaveLinx PRO Tilemount Sensor Kit

Description

Required Accessories
All WaveLinx connected lighting (WCL) system accessories require at least one WaveLinx Area Controller (WAC) for communications. Ensure the bill of material includes one of the following components.

Catalog Number Catalog Number WAC2-POE WAC2-120

WaveLinx Area Controller G2, PoE powered WaveLinx Area Controller G2 with 120VAC to PoE Injector

Optional Accessories For connection to 120VAC outlets.

Description

Catalog Number
Catalog Number WPOE2-120

120VAC to PoE Injector

Product Specifications
Key Features Kit Contents:
· Sensor · Control module · 54″ Plenum rated cable · Tile and 4″ octagon mounting trim · Easily enable 0-10V luminaires to be controlled by WaveLinx · Provides closed loop daylighting control of non-integrated luminaires · Control module mounting to junction box or luminaire driver compartment · Sensor installs into 1/2 – 3/4″ (12 – 19mm) ceilings or octagonal junction boxes · Ceiling white trims that can be painted for custom appearance · Mounting heights of 8 to 15ft (2.4 to 4.5m) · Provides passive infrared (PIR) motion coverage up to 500 sq-ft (46m2) · Hardware capable of Real Time Location Services (RTLS) CORE Locate license required · Energy calculations available through WaveLinx CORE
Mechanical Tilemount Sensor Size: 2.8″ x 2.8″ x 1.2″ (70mm x 70mm x 31mm) J-Box Sensor Size: 4.1″ x 4.1″ x 1.0″ (105mm x 105mm x 24mm) Environment:
· Operating temperature: -4°F to 131°F (-20°C to 55°C) · Storage temperature: -40°F to 158°F (-40°C to 70°C) · Relative humidity operating: 5% to 95% non- condensing · For indoor use only Mounting Height: 8-15ft (2.4 to 4.5m) Ceiling hole diameter: 2.9″ (73mm) Ceiling thickness: 0.5 to 0.75″ (12 – 19mm) drop ceiling thickness Color: Matte white (field paintable trim) Housing: UV stabilized plastic

Description
Electrical · 120/277VAC incoming and switched power · 10mA 0-10V sink (refer to driver specifications to calculate quantity supported) · 3A LED loads Software Specifications · Any number of sensors can be mapped to any number of zones · Remote configuration of occupancy sensing and closed loop daylighting Wireless Specifications Radio: 2.4GHz Standard: IEEE 802.15.4 Transmitter Power: + 7dBm Range: 75ft (25m) LOS # of Walls: 2 interior walls standard construction Standards/Ratings · cULus Listed · Meets latest ASHRAE Standard 90.1 requirements · Meets latest IECC requirements · Meets latest CEC Title 24 requirements Environmental Regulations: · RoHS Directive 2011/65/EU Warranty · Five year warranty standard
T24 and RoHS are self-tested by Cooper Lighting Solutions. Not a third party certification.
PS503097EN page 2
July 2024

WaveLinx
Dimensional Details
Sensor for Tilemount installation

Sensor for J-Box installation

PRO Tilemount Sensor Kit
Mounting Height
15′ [4.5m] 8′ [2.4m]

2.8″ [70mm]

ø 4.1″ [105mm]

Wiring Diagrams

120/277 VAC

Black (Hot) White (Neutral)

Control module (MSP3IVMVDC1EP)

Pink (Dimming) Purple (Dimming) Blue (Not Switched) White (Neutral)

0-10V DImming Driver

Includes switchleg (Blue load out wire) and 0-10V to each fixture controlled

WaveLinx Pro Tilemount Sensor Kit control module
(MSP3IVMVDC1EP) (included)

54″ Plenum cable (5140-000123-00)
(included)

120/277 VAC 3A downlights with 0-10V control

ceiling tile

WaveLinx Pro Sensor and Mounting Trim
(included)

Tilemount Installation

Step 1: Cut 2-7/8″ (73mm) to 3″ (76mm) diameter hole in ceiling tile.
Step 2: Connect plenum cable connectors.
Step 3: Snap sensor body into ceiling trim.

ceiling tile
1

Step 4:

Squeeze trim springs and insert

3

through hole.

ceiling tile
4 2

PS503097EN page 3
July 2024

WaveLinx

J-Box Installation

Step 1: Snap sensor body into cover plate.

Step 2: Pull plenum sensor cable through junction box knockout.

Step 3: Connect plenum cable connectors.

Step 4:

Secure sensor kit to junction box.

3

2 1

4
Additional Dimensional Details – Tilemount Sensor

PRO Tilemount Sensor Kit

1.2″ [31mm] ø 3.3″ [83mm]

1.2″ [31mm] Additional Dimensional Details – J-Box Sensor

ø 4.1″ [105mm]

0.8″ [21mm] 1.0″ [24mm]

3.5″ [89mm]

PS503097EN page 4
July 2024

WaveLinx
Additional Dimensional Details – Control module
6.3″ [159mm] 6.6″ [168mm]

PRO Tilemount Sensor Kit
1.1″ [28mm]

1.1″ [28mm] 1.6″ [40mm]

PS503097EN page 5
July 2024

WaveLinx
Field of View
TOP VIEW:
15 ft [4.5m] 0 ft [0m]

PRO Tilemount Sensor Kit CL
CL

SIDE VIEW:

15 ft [4.5m]

Notes: (1) The coverage pattern shown above depicts the area below the luminaire where the integrated sensor system can detect occupancy. (2) Spacing between fixtures should not exceed the coverage pattern of the sensor. (3) Mounting height should not exceed coverage shown. (4) Exceeding these spacing/height guidelines will result in reduced integrated sensor performance.

0 ft [0m]

8 ft [2.4m] 10 ft [3.0m]

15 ft [4.5m]

7.5 ft [2.25m]

0 ft [0m]

7.5 ft [2.25m]

15 ft [4.5m]

Recomended Mounting Height 8 to 15 ft [2.4 to 4.5m].

Note – coverage pattern not to scale

PS503097EN page 6
July 2024

WaveLinx

PRO Tilemount Sensor Kit

System Diagram:
This diagram shows the main components of the WaveLinx connected lighting system with CAT and PRO devices.
The PRO devices communicate using wireless mesh technology based on the IEEE 802.15.4 standard. A PoE LAN connection for each WaveLinx Area Controller (WAC) is required for power and data access to the building lighting network.
The CAT devices communicate over the category 5 based communication bus and control the light fixtures using a relay (on/off) and 0-10V output (dim/raise).
WaveLinx Area Controllers (WAC) communicate with WaveLinx CORE Apps over the Ethernet network.

View WaveLinx Network
and IT Guidance Technical Guide

Smart Spaces Apps

CORE Admin

CORE Lighting

CORE Locate

CORE Insights

CORE Insights on Cloud

Networked Relay Panel

WaveLinx CAT

Wired

1

2