ROUGH COUNTRY 921930580 Passenger Grip Handle Dual Cup Holder Instruction Manual
- September 3, 2024
- Rough Country
Table of Contents
ROUGH COUNTRY 921930580 Passenger Grip Handle Dual Cup Holder
Thank You
Thank you for choosing Rough Country for all your vehicle needs.
Please read instructions before beginning installation. Check the kit hardware
against the kit contents shown below. Be sure you have all needed parts and
know where they go.
If question exist, please call us
@1-800-222-7023. We will be happy to
answer any questions concerning this product.
Check all fasteners for proper torque. Check to ensure for adequate clearance
between all components. Periodically check all hardware for tightness.
KIT CONTENTS:
2 – Stainless Drink Holder
2 – Grip Mounting Bracket
Cup Holder Plate
TOOLS NEEDED:
13mm Socket or Wrench
10mm Socket or Wrench
4mm Allen Wrench
HARDWARE INCLUDED:
1 – 8mm x 35mm Bolt
1 – 8mm Lock Nut
4 – 6mm x 14mm Bolt
4 – 6mm Lock Nut
Torque Specs:
Size| Grade 5| Grade 8| Size| Class 8.8| Class
10.9
---|---|---|---|---|---
5/16”| 15 ft/lbs| 20ft/lbs| 6MM| 5ft/lbs| 9ft/lbs
3/8”| 30 ft/lbs| 35ft/lbs| 8MM| 18ft/lbs| 23ft/lbs
7/16”| 45 ft/lbs| 60ft/lbs| 10MM| 32ft/lbs| 45ft/lbs
1/2”| 65 ft/lbs| 90ft/lbs| 12MM| 55ft/lbs| 75ft/lbs
9/16”| 95 ft/lbs| 130ft/lbs| 14MM| 85ft/lbs| 120ft/lbs
5/8”| 135ft/lbs| 175ft/lbs| 16MM| 130ft/lbs| 165ft/lbs
3/4”| 185ft/lbs| 280ft/lbs| 18MM| 170ft/lbs| 240ft/lbs
INSTALLATION INSTRUCTIONS
-
Install the two mounting brackets onto the cup holder plate using the supplied 6mm bolts and lock nuts. Tighten with a 4mm Allen wrench and 10mm wrench. See Photo 1.
-
Place the mounting bracket over desired hole on the passenger grab bar. Slide the supplied 8mm bolt through the mounting brackets and the hole in the grab bar. Tighten with two 13mm wrenches. See Photo 2.
-
Peel the backer off the adhesive that is attached to the stainless cup holder. See Photo 3.
-
Press stainless cup holder to the holder plate. See Photo 4.
-
Repeat for other cup holder.
POST INSTALLATION INSTRUCTIONS
- Check all fasteners for proper torque. Check to ensure for adequate clearance between all rotating, mobile, fixed, and heated members. Verify clearance between exhaust and brake lines, fuel lines, fuel tank, floorboards, and wiring harness.
By purchasing any item sold by Rough Country, LLC, the buyer expressly warrants that he/she is in compliance with all applicable, State, and Local laws and regulations regarding the purchase, ownership, and use of the item. It shall be the buyers responsibility to comply with all Federal, State and Local laws governing the sales of any items listed, illustrated or sold. The buyer expressly agrees to indemnify and hold harmless Rough Country, LLC for all claims resulting directly or indirectly from the purchase, ownership, or use of the items.