McLED Safir Interior Lamp Owner’s Manual

McLED Safir Interior Lamp

Product Information

Specifications:

• Product Name: Safir Interior Lamp ML-411.015.91.0
• Power Range: 8W, 10W, 15W
• Input Voltage: 220-240 VAC
• Frequency: 50/60 Hz
• Color Temperature Options: Cool White (CW), Neutral White (NW), Warm White (WW)
• Operating Mode: Soft Start with 18s or 10s duration
• CRI (Color Rendering Index): 80
• IP Rating: 54

Product Usage Instructions

Installation:

1. Unpack the product and ensure all components are included.
2. Plug in the lamp to a suitable power source (220-240 VAC, 50/60 Hz).
3. Set the desired color temperature using the CCT switch (CW, NW, WW).
4. Choose the power range (8W, 10W, 15W) based on your preference.
5. Adjust the operating mode to either 18s or 10s soft start.

Usage:

1. To turn the light on, use the ON button. To turn it off, use the OFF button.
2. To separate the cover from the light for maintenance or cleaning, push the fixing button.
3. Ensure a minimum cable length of 20 cm for safe operation.

Maintenance:
Refer to the manual for detailed maintenance instructions. The light source is not replaceable; if needed, replace the entire lamp. The ballast can be replaced by a qualified person without causing permanent damage to the luminaire.

FAQ:

• Q: Can the light source be replaced?
  A: No, the light source is not replaceable. The entire lamp must be replaced if needed.

• Q: Can the ballast be replaced?
  A: Yes, the ballast can be replaced by a responsible person with appropriate qualifications without causing permanent damage to the luminaire.

In the package

WIRING & INSTALLATION

DIMENSION

This product contains an energy-efficiency class light source (see above). Replacement option; (1) The light source cannot be replaced, the lamp must be replaced with a new one. (2) The ballast can be replaced by a responsible person with appropriate qualifications without permanent damage to the luminaire.

Manual and recommendations

• Only appropriately qualified persons can install and service the light fixtures. The light has been designed for dry interior environments and for a voltage of 230V/50Hz. Turn off the electric power supply prior to connecting the lead conductors.
• The light has been designed for being attached to the ceiling in interior. The source light is firmly built-in and cannot be replaced.
• Do not cover the light fixture when it is on, this ensuring it is proper cooling. Do not operate the light when it is damaged.
• Incompliance with these instructions can result in serious injuries, fires or light damages.
• Clean the surface of the light fixture with a soft rag; do not use cleaning agents with abrasive additives or solvents; turn the light off and let the light fixture cool down. The warranty does not apply to light fixture damages caused by improper installation or maintenance.
• Upon the expiry of its lifespan, take the light fixture to a facility designated for electric equipment collection.
• Instructions in electronic form, contact data and declaration of conformity can be downloaded at www.mcled.cz, or request them at support@mcled.cz.

www.mcled.eu
McLED s.r.o., Vídeňská 185, 252 50 Vestec, Czech Republic

References

• McLED
• McLED.eu
• McLED

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>