McLED ML-910.542.22.0 RF RGBW Remote Controller Instructions
- June 6, 2024
- McLED
Table of Contents
RF RGBW Remote Controller
ML-910.542.22.0
Important: Read All Instructions Prior to Installation.
Installation may only be performed by qualified persons.
Product data
Output | RF signal |
---|---|
Operation Frequency | 868 MHz |
Power Supply | 4,5V (3xAAA battery) |
Operating temperature | 0-40°C |
Relative humidity | 8% to 80% |
Dimensions | 120 x 55 x 17 mm |
Operation
-
Pair with RF receivers:
a) Short-click „Learning Key“ on the RF receiver.
b) Click a zone number of 1-4
c) Touch color wheel on RF remote
d) LED lights connected with the RF receiver will flicker once -
How to delete the pairing
Press and hold down „Learning Key“ the receiver for over 3 seconds until connected
LED lights twice, which means the pairing is deleted successfully. -
Play the remote after pairing
a) Click the paired zone number/numbers
b) Touch the color wheel or other buttons to do the controlling
If you use multiple receivers, you have two choices
- Have all the receivers in the same zone, like zone 1
- Have each receiver in a different zone, like zone 1, 2, 3 or 4
- Control 4 zones of RF receivers separately
- RGBW color controller
- High sensitive & high stable touch color wheel, fast & precise color control
- Compatible with all universal series RF receivers
- 1 receiver can be paired with max 8 different remote controls
- Waterproof grade: IP20
Safety & Warnings
- This device contains AAA batteries that shall be stored and disposed of properly
- DO NOT expose the device to moisture
*When the lifetime of this product will run out, please hand it into the places for electro-waste.