SONY Interchangeable Lens Digital Camera FX3 User Guide

: June 6, 2024
: Sony

SONY Interchangeable Lens Digital Camera FX3

| SUPPORT
---|---
| Help Guide” (Web manual)
Refer to “Help Guide” for in-depth instructions on the many functions of the camera.

Preparations

Checking the supplied items

The number in parentheses indicates the number of pieces.

Camera (1)
USB Type-C® cable (1)
Battery charger (1)
XLR handle unit (1)
**Power cord (mains lead) (1)***
Accessory shoe kit (1)
(supplied in some countries/ regions)
Multiple power cords may be supplied with this equipment. Use the appropriate one that matches your country/region. See “Notes on use.”
Rechargeable battery pack NP-FZ100 (1)
Body cap (1) (attached to the camera)
Shoe cap (1) (attached to the camera)
Handle shoe cap (1) (attached to GB the handle)
Startup Guide (this manual) (1)
Reference Guide (1)

Identifying parts

For details on identifying parts, refer to the following Help Guide URL:

Preparing the battery pack

Insert the battery pack into the battery charger, and connect it to a wall outlet (wall socket) using the power cord (supplied).
● Place the battery pack on the battery charger in the direction of ▲. Slide the battery pack in the direction of the arrow as far as it will go.

● When charging starts, the CHARGE lamp on the battery charger will light up. When charging is finished, the CHARGE lamp and all indicators turn off.
Insert the battery pack into the camera.
● Open the battery cover, and then insert the battery pack while pressing the lock lever.

Inserting a memory card into the camera

You can use CFexpress Type A memory cards and SD memory cards with this camera.

Open the memory card cover and insert the memory card into Slot GB 1.

Both Slot 1 and Slot 2 support CFexpress Type A memory cards and SD memory cards.
Insert a CFexpress Type A memory card with the label facing the monitor, and an SD memory card with the terminal facing the monitor. Insert the card until it clicks into place.
You can change which memory card slot to use by selecting MENU → (Shooting) → [Media] → [ Rec. Media Settings] → [Prioritize Rec. Media]. The Slot 1 is used in the default settings.
Hint
When you use a memory card with the camera for the first time, it is recommended that you format the card on the camera for more stable performance of the memory card.

Attaching a lens

Remove the body cap from the camera and the rear lens cap from the rear of the lens.
Mount the lens by aligning the two white index marks (mounting indexes) on the lens and camera.
While pushing the lens lightly toward the camera, turn the lens slowly in the direction of the arrow until it clicks into the locked position.

Attaching the XLR handle unit (supplied)

By attaching the XLR handle unit, up to four audio devices can be connected to the camera simultaneously.

Remove the shoe cap from the camera and the handle shoe cap from the XLR handle unit.
Slide the XLR handle unit into the Multi Interface Shoe until it reaches the back of the shoe. Then, be sure to securely tighten the screws on either side using a GB coin, etc.

Setting the language and the clock

Set the power switch to “” (On) to turn on the camera.\
Select the desired language and then press the center of the control wheel.
Make sure that [Enter] is selected on the area/date/time confirmation screen, and then press the center of the control wheel.
Select the desired geographic location, set [Daylight Savings], and then press the center.
● [Daylight Savings] can be switched on/off using the top/bottom of the control wheel.
Set the date format (year/month/day), and press the center.
Set the date and time (hour/minute/second), and press the center.
● To set the date and time or geographic location again at a later point, select MENU → (Setup) → [Area/Date] → [Area/Date/Time Setting].

Shooting

Shooting movies

Press the MODE (Mode) button, use the control wheel to select (Movie), and then press the center.
Press the REC (Recording) button to start recording.
Movie recording can be started from any shooting mode in the default setting.
Press the REC button again to stop recording.

Shooting still images

Press the MODE (Mode) button, use the control wheel to select the desired shooting mode, and then press the center of the control wheel.
Press the shutter button halfway down to focus.
Press the shutter button all the way down.

Viewing

Press the (Playback) button to switch to the playback mode.
Select an image with the control wheel.
You can move to the previous image/ next image by pressing the left/right side of the control wheel. To start playing back a movie, press the center button on the control wheel.

For details on menu settings on the camera, refer to the following Help Guide URL:
https://rd1.sony.net/help/ilc/2035_menu/h_zz/

Notes on use

Refer to “Precautions” in the “Help Guide” as well.

Notes on handling the product

This camera is designed to be dustand moisture-resistant, but is not waterproof or dust-proof.
Do not leave the lens exposed to a strong light source such as sunlight.
Because of the lens’s condensing function, doing so may cause smoke, fire, or a malfunction inside the camera body or the lens.
If sunlight or other strong light enters the camera through the lens, it may focus inside the camera and cause smoke or fire. Attach the lens cap when storing the camera. When shooting with backlighting, keep the sun sufficiently far away from the angle of view. Even if it is slightly away from the angle of view, smoke or fire may still occur.
Do not directly expose the lens to beams such as laser beams. That may damage the image sensor and cause the camera to malfunction.
Do not look at sunlight or a strong light source through the lens when it is detached. This may result in unrecoverable damage to the eyes or cause a malfunction.
This camera (including accessories) has magnet(s) which may interfere with pacemakers, programmable shunt valves for hydrocephalus treatment, or other medical devices. Do not place this camera close to persons who use such medical devices. Consult your doctor before using this camera if you use any such medical device.
Increase the volume gradually. Sudden loud noises can damage your ears. Be especially careful when listening to headphones.
Do not leave the camera, the supplied accessories, or memory cards within the reach of infants. They may be accidentally swallowed. If this occurs, consult a doctor immediately.
While the cooling fan is in operation, be careful not to let any objects get sucked into the fan.

Notes on the monitor

The monitor is manufactured using extremely high-precision technology, and over 99.99% of the pixels are operational for effective use.
However, there may be some small black dots and/or bright dots (white, red, blue or green in color) that constantly appear on the monitor.
These are imperfections due to the manufacturing process and do not affect the recorded images in any way.
If the monitor is damaged, stop using the camera immediately. The damaged parts may harm your hands, face, etc

Notes on continuous shooting

During continuous shooting, the monitor may flash between the shooting screen and a black screen. If you keep watching the screen in this situation, you may experience uncomfortable symptoms such as feeling of unwellness. If you experience uncomfortable symptoms, stop using the camera, and consult your doctor as necessary.

Notes on recording for long periods of time or recording 4K movies

The camera body and battery may become warm with use – this is normal.
If the same part of your skin touches the camera for a long period of time while using the camera, even if the camera does not feel hot to you, it may cause symptoms of a low-temperature burn such as redness or blistering.
Pay special attention in the following situations and use a tripod, etc.
– When using the camera in a high temperature environment
– When someone with poor circulation or impaired skin sensation uses the camera
– When using the camera with [Auto Power OFF Temp.] set to [High]

Notes on using memory cards

When recording is finished, the memory card may become hot. This is not a malfunction.
If (overheating warning icon) is displayed on the monitor, do not remove the memory card from the camera right away. Instead, wait for a while after turning off the camera, and then remove the memory card. If you touch the memory card while it is hot, you may drop it and the memory card may be damaged. Be careful when removing the memory card.

Notes on using a tripod
Use a tripod with a screw less than 5.5 mm (7/32 inches) long. Otherwise, you cannot firmly secure the camera, and damage to the camera may occur.

Sony lenses/accessories
Using this unit with products from other manufacturers may affect its performance, leading to accidents or malfunction.

Warning on copyrights
Television programs, films, videotapes, and other materials may be copyrighted. Unauthorized recording of such materials may be contrary to the provisions of the copyright laws.

Notes on location information
If you upload and share an image tagged with a location, you may accidentally reveal the information to a third party. To prevent third parties from obtaining your location information, set [Location Info Link] to [Off] before shooting images.

Notes on discarding or transferring this product to others
Before discarding or transferring this product to others, be sure to perform the following operation to protect private information.

Select [Setting Reset] → [Initialize].

Notes on discarding or transferring a memory card to others
Executing [Format] or [Delete] on the camera or a computer may not completely delete the data on the memory card. Before transferring a memory card to others, we recommend that you delete the data completely using data deletion software. When discarding a memory card, we recommend that you physically destroy it.

Note on network functions
When you use network functions, unintended third parties on the network may access the camera, depending on the usage environment. For example, unauthorized access to the camera may occur in network environments to which another network device is connected or can connect without permission. Sony bears no responsibility for any loss or damage caused by connecting to such network environments.

Note on the 5 GHz band for wireless LAN
When using the wireless LAN function outdoors, set the band to 2.4 GHz by following the procedure below.
(WW728473 only)

MENU → (Network) → [Wi-Fi] → [Wi-Fi Frequency Band]

How to turn off wireless network functions (Wi-Fi, etc.) temporarily
When you board an airplane, etc., you can turn off all wireless network functions temporarily using [Airplane Mode].

Notes on the XLR handle unit (supplied)

Before connecting/disconnecting an external microphone or device to/from the INPUT1 or INPUT2 jack, be sure to set the INPUT1 (LINE/MIC/MIC+48V) or INPUT2 (LINE/MIC/MIC+48V) switch to a position other than “MIC+48V.” Plugging/unplugging the cable into/ from the external microphone or device while the switch is set to “MIC+48V” may cause loud noise or a malfunction of the device.
While recording is in progress, operating and handling noises from the camera or lens may be recorded.
Touching the handle while recording is in progress will cause noise to be included in the recording.
While recording is in progress, do not change the INPUT1 or INPUT2 switch settings.
If the microphone of the handle is in proximity to a speaker, acoustic feedback may occur. In this case, move the handle away from the speaker to allow the maximum distance between the microphone and the speaker, or lower the speaker volume.
If dust or water droplets are present on the surface of the microphone, successful recording may not be possible. Be sure to clean the microphone surface before using the handle.
Turn off the camera before attaching/ removing the handle.
When the handle is connected to the camera and the HANDLE AUDIO ON/OFF switch is set to ON, the internal microphone of the camera cannot record audio input.
When attaching the handle to the camera, fasten the two handle attachment screws securely.
Using the handle without fastening the handle-attachment screws may damage the Multi Interface Shoe terminal or cause the handle to fall off.

Power Cord
For the customers in the UK, Ireland, Malta, Cyprus and Saudi Arabia
Use the power cord (A).
For safety reasons, the power cord (B) is not intended for above countries/regions and shall therefore not be used there.
For the customers in other EU countries/regions
Use the power cord (B).

For Customers in the U.S.A.

For question regarding your product or for the Sony Service Center nearest you, call 1-800-222-SONY (7669) .

Supplier’s Declaration of Conformity
Trade Name: SONY
Model : WW728473
Responsible Party: Sony Electronics Inc.
Address: 16535 Via Esprillo, San Diego, CA 92127 U.S.A.
Telephone Number: 858-942-2230 This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Specifications

Camera
[System]
Camera Type: Interchangeable Lens Digital Camera
Lens: Sony E-mount lens

[Image sensor]
Image format: 35 mm full frame (35.6 mm × 23.8 mm), CMOS image sensor
Effective pixel number of camera : Approx. 12 100 000 pixels
Total pixel number of camera: Approx. 12 900 000 pixels

[Monitor]
7.5 cm (3.0 type) TFT drive, touch panel

[General]
Rated input: 7.2 V ⎓, 7.3 W (during movie recording)
Operating temperature: 0 to 40°C (32 to 104°F)
Storage temperature: –20 to 55°C (–4 to 131°F)
Dimensions (W/H/D) (Approx.): 129.7 × 77.8 × 84.5 mm 5 1/8 × 3 1/8 × 3 3/8 in.
Mass (Approx.): 715 g (1 lb 9.3 oz) (including battery pack, SD card)

[Wireless LAN]
WW728473 (see name plate on the bottom of camera)
Supported format: IEEE 802.11 a/b/g/n/ac
Frequency band: 2.4 GHz/5 GHz
Security: WEP/WPA-PSK/WPA2-PSK
Connection method: Wi-Fi Protected Setup™ (WPS)/ Manual
Access method: Infrastructure mode WW558244 (see name plate on the bottom of camera)
Supported format: IEEE 802.11 b/g/n
Frequency band: 2.4 GHz
Security: WEP/WPA-PSK/WPA2-PSK
Connection method: Wi-Fi Protected Setup™ (WPS)/ Manual
Access method: Infrastructure mode

XLR handle unit
Mass (Approx.): 300 g (10.6 oz)

Battery charger BC-QZ1

Rated input: 100 – 240 V ∼ , 50/60 Hz, 0.38 A
Rated output: 8.4 V ⎓ , 1.6 A

Rechargeable battery pack NP-FZ100
Rated voltage: 7.2 V ⎓

Design and specifications are subject to change without notice.

Trademarks

XAVC S and are registered trademarks of Sony Corporation.
XAVC HS and are registered trademarks of Sony Corporation.
USB Type-C® and USB-C® are registered trademarks of USB Implementers Forum.
Android and Google Play are trademarks or registered trademarks of Google LLC.
Wi-Fi, the Wi-Fi logo and Wi-Fi Protected Setup are registered trademarks or trademarks of the Wi-Fi Alliance.
QR Code is a trademark of Denso Wave Inc.
In addition, system and product names used in this manual are, in general, trademarks or registered trademarks of their respective developers or manufacturers. However, the ™ or ® marks may not be used in all cases in this manual.