McLED Nova R 600 Lamp LED User Manual
- June 3, 2024
- McLED
Table of Contents
Nova R 600
User manual Nova R 600 light fixtures
Only appropriately qualified persons can install and service the light
fixtures.
The light has been designed for dry interior environments and for a voltage of
230V/50Hz.
Turn off the electric power supply prior to connecting the lead conductors.
The light fixture has been designed for being attached to the ceiling or
suspended.
When the suspension option is used, proceed in accordance with the suspension
set user manual.
Do not cover the light fixture when it is on, thus ensuring its proper
cooling.
Do not operate the light fixture when it is damaged or when its optical cover
is broken.
Incompliance with these instructions can result in serious injuries, fires, or
light fixture damages.
The light source is firmly built-in and cannot be replaced.
Clean the surface of the light fixture with a soft rag; do not use cleaning
agents with abrasive additives or solvents; turn the light off and let the
light fixture cool down prior to
cleaning.
The warranty does not apply to light fixture damages caused by improper
installation or maintenance.
Upon the expiry of its lifespan, take the light fixture to a facility
designated for electric equipment collection.
This product
contains a light source with energy efficiency class (see above).
Replaceability: (1) Light source is not replaceable, the luminaire must be
replaced, (2) control gear can be replaced by a qualified electrician without
permanently damaging the luminaire.
| 
---|---
Suspension kit ML-419.040.33.0 (white) or ML-419.040.33.1 (black),
instructions are listed in the user manual of a suspension kit.
(optional accessory – not included in the package of the luminaire)
Documents / Resources
|
McLED Nova R 600 Lamp
LED
[pdf] User Manual
Nova R 600, Lamp LED, LED, Lamp, Nova R 600
---|---
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>