McLED ML-411.012.42.0 Interior Lamp Calvia Instruction Manual
- June 16, 2024
- McLED
Table of Contents
Interior lamp Calvia 30 W
ML-411.012.42.0
www.mcled.eu
McLED s.r.o., Vídeňská 185, 252 50 Vestec, Czech Republic
ML-411.012.42.0 Interior Lamp Calvia
Package including:
For assembly you will need:
Manual and recommendations
- Only appropriately qualified persons can install and service the light fixtures.
- The light has been designed for dry interior environments and for a voltage of 230V/50Hz.· Turn off the electric power supply prior to connecting the lead conductors.
- The light has been designed for being attached to the ceiling or wall in interior.
- Do not cover the light fixture when it is on, this ensuring it is proper cooling.
- Do not operate the light when it is damaged.
- Incompliance with these instructions can result in serious injuries, fires or light damages.
- The source light is firmly built-in and cannot be replaced.
- Clean the surface of the light fixture with a soft rag; do not use cleaning agents with abrasive additives or solvents; turn the light off and let the light fixture cool down.
- The warranty does not apply to light fixture damages caused by improper installation or maintenance.
- Upon the expiry of its lifespan, take the light fixture to a facility designated for electric equipment collection.
- Instructions in electronic form, contact data and declaration of conformity can be downloaded at www.mcled.cz, or request them at support@mcled.cz.
This product contains an energy efficiency class light source (see above). Replacement option; (1) The light source cannot be replaced, the lamp must be replaced with a new one. (2) The ballast can be replaced by a responsible person with appropriate qualifications without permanent damageto the luminaire.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>