McLED ML-113.009.02.0 PIR010 PIR Sensor Installation Guide
- June 12, 2024
- McLED
Table of Contents
Installation manual PIR010
IP20
Before your start installation
- Unpack product and check it carefully
- If the product is damaged in any way, submit your claim together with the product in its original packing
- Please, do not attempt to use any damaged product
- Always make sure that the power supply is switched off before installation
- The installation may only be carried out by a person with the appropriate professional qualifications!
Product data
| Model | ML-113.009.02.0 |
|---|---|
| Applicable voltage | DCS – 24V |
| Current | Max. 4A |
| Sensing angle | 100° |
| Delay time | 30s,60s,380s for option |
| Sensing mode | Day time and night time |
| Night mode | < 25 Ix |
| Light-off mode | On/Off with brightness buffer |
| Working temperature | -20°C to +40°C |
| Dimensions | 60 x 61 x 31.2 mm |
Operating / maintenance
- PIR010 is developed by pyroelectric infrared induction technology, which is working as a human presence sensor switch. It could achieve the effect that the lights are on when people appear and the lights are off when people disappear. Energy saving and timely lighting PIR010 is the ideal choice for your home lighting with stylish appearance.
- Wide range of applications: it could be use to different application such as bedside, wardrobe or storage shelf, stairwell or porch entrance, kitchen and garage, etc.
- Super easy to use: just connect the power and lighting products (such as light strips, etc.) through two 5521 DC power sockets and then use the 3M glue or screws to fix the place
wherever necessary.
Connection
- The brightness is adjustable. The required brightness can be easily adjusted through the knob on the top of the product.
- Three levels of induction time are available, 30 seconds, 60 seconds, and 380 seconds.
- Sensing to turn on the illuminance, there are two modes of day and night to choose from (night mode < 25 lx).
- Built-in sensitivity temperature compensation function.
- Input reverse connection protection and input and output reverse connection protection.
- The light is soft and not dazzling.
- Detection Range: 6m Max.
Product details
|
---|---
Input & output with DC female plug| Day time and night time
|
Brightness adjustment| 30s, 60s, 380s delay time
Installation (2 ways)
|
---|---
Installation with double sided adhesive tape| Installation with two screws
Wire diagram
Precautions
- Avoid installing the sensor in a location exposed to strong light and strong wind.
- The maximum working temperature of the sensor is 40°C and the sensor may not be sensitive if it exceeds this range.
- The sensor is non-waterproof and could be used in dry environments only.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>