McLED ML-910.521.22.0 RF Remote Controller CCT Instructions
- June 6, 2024
- McLED
Table of Contents
RF Remote Controller CCT ML-910.521.22.0
Important: Read All Instructions Prior to Installation. Installation
may only be performed by qualified persons
Product data
Output | RF signal |
---|---|
Operation Frequency | 868 MHz |
Power Supply | 4,5V (3xAAA battery) |
Operating temperature | 0-40°C |
Relative humidity | 8% to 80% |
Dimensions | 120 x 55 x 17 mm |
- Control 4 zones of RF receivers separately
- CCT color controller
- High sensitive & high stable touch color wheel, fast & precise color control
- Compatible with all universal series RF receivers
- 1 receiver can be paired by max 8 different remote controls Waterproof grade: IP20
Safety & Warnings
This device contains AAA batteries that shall be stored and disposed of
properly
DO NOT expose the device to moisture
Operation
-
Pair with RF receivers:
a) Short-click „Learning Key“ on the RF receiver.
b) Click a zone number of 1-4
c) Touch color wheel on RF remote
d) LED lights connected with the RF receiver will flicker once -
How to delete the pairing
Press and hold down „Learning Key“ the receiver for over 3 seconds until connected
LED lights twice, which means the pairing is deleted successfully. -
Play the remote after pairing
a) Click the paired zone number/numbers
b) Touch the color wheel or other buttons to do the controlling
If you use multiple receivers, you have two choices
1. Have all the receivers in the same zone, like zone 1
*When the lifetime of this product will run out, please hand it into the places for electro-waste.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>