McLED 20 W LED Lamp Chemic Installation Guide
- June 12, 2024
- McLED
Table of Contents
McLED 20 W LED Lamp Chemic
Product Information
- Product Name: Chemic
- Available Wattage: 20 W, 40 W, 60 W
- Input Voltage: 220-240 VAC (50/60Hz)
- Luminous Flux: 2600 lm (20W), 5200 lm (40W),7800 lm (60W)
- Color Temperature: 4000 K, 5000 K
- Color Rendering Index (CRI): 80
- Power Factor: 0.9
- Beam Angle: Not specified
- Operating Temperature: Not specified
- Lifespan: Not specified
- Waterproof Grade: IP69K
- Connection: Linkable installation
- Cable Specification: HO7RN-F, diameter 3 x 1,5 mm2
Product Usage Instructions
- Select the appropriate wattage (20 W, 40 W, or 60 W) based on your requirements.
- Ensure the input voltage is within the range of 220-240 VAC and the frequency is either 50Hz or 60Hz
- Choose the desired color temperature (4000 K or 5000 K) for the lighting.
- If color rendering is important, note that the product has a CRI of 80.
- Check the power factor, which is 0.9, to ensure efficient power usage.
- Connect the luminaire using the linkable installation method.
- Use the specified cable (HO7RN-F, diameter 3 x 1,5 mm2) for interconnecting luminaires with a maximum power of 2000 W.
- Follow the recommended installation methods: surface mount or suspension mount.
- Make sure to connect the correct wires – Brown (L) and Blue (N) for power, and Yellow/Green (PE) for grounding.
- Refer to the provided website (www.mcled.eu) for additional information on McLED products.
- Keep in mind that McLED is not responsible for any damages resulting from failure to follow the provided instructions.
- Dispose of the product properly at designated electronic waste collection points when its lifetime runs out.
Installation manual
- The installation may only be carried out by a person with the appropriate professional qualifications!
- Before installing, please read these instructions carefully.
- Unpack product and check it carefully.
- If the product is damaged in any way, submit your claim together with the product in its original packing.
- Please, do not attempt to use any damaged product.
- Always make sure that the power supply is switched off before installation.
- Max. number of luminaires for linkable installation (2000 W).
Operating / maintenance
- The Installation of the luminaire must be done properly to avoid falling the luminaire.
- In case of difusor breaking, do not use the luminaire and ensure its replacement.
- Do not touch the luminaire during operation or shortly after turning off – risk of burning! Let the luminaire cool down! – Do not cover, place away from flammable substances.
- Warning: Avoid contact of the luminaire internal parts with water.
- Do not look at the luminaire from a short distance; there is a risk of injury to the eyes.
- Do not disassemble the luminaire – do not adjust or reset electronic components of the luminaire circuits.
- Do not operate the luminaire in the area of strong magnetism or high voltage.
- Do not cover the product. Do not install the product nearby flammable substance.
- In the event of damage the light source the product cannot be repaired.
Notes and Recommendations
- Failure to follow these instructions may cause fire, burns, injury by electrical current, physical injury and other material and non-material damages.
- Additional information on McLED products is available at: www.mcled.eu
- McLED is not liable for damages resulting from failure to follow these instructions.
- When the lifetime of this product will run out, please hand it in to the places for electro-waste.
Surface mount
Suspension mount
Product data
| Input power | 20 W, 40 W, 60 W |
|---|---|
| Input voltage | 220-240 VAC (50/60Hz) |
Luminous flux
| 2600 lm (20W)
5200 lm (40W)
7800 lm (60W)
Color temperature| 4000 K, 5000 K
Color rendering index| CRI ≥80
Power factor| ≥0,9
Beam angle| 120°
Operating temperature| -20 to +45 °C
Lifespan| >56 000 h (L90)
Waterproof grade| IP69K
Connection
Linkable installation
For PMax. 2000 W interconnected luminaires: The specifion of cable is: HO7RN-F, diameter 3 x 1,5 mm2
McLED warranty
McLED s.r.o. (Ltd.) provides a five-years warranty on LED luminaires. In the event of a claim, the customer is entitled to reimbursement of reasonable costs incurred in association with the claim only in connection with shipping costs, which is approved with the seller in advance. To determine the legitimacy of the claim, the manufacturer must always have the option of assessing the correctness of the LED luminaire installation on the site where it is installed.
This product contains a light source with energy efficiency class (see above).
Replaceability:
- Light source is not replaceable, the luminaire must be replaced.
- control gear can be replaced by a qualified electrician without permanently damaging the
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>