McLED ML-952.002.22.0 RGBW Power Reapeater Instructions
- June 6, 2024
- McLED
Table of Contents
McLED ML-952.002.22.0 RGBW Power Reapeater
Important : Read All Instructions Prior to Installation.
Installation may only be performed by qualified persons.
Safety & Warnings:
- DO NOT install with power applied to device.
- DO NOT expose the device to moisture.
Wiring diagram:
Product data:
| Input/output voltage | 12-36VDC |
|---|
Output Current
1 channel
| max. 5A
Output Power
total 4 channels
| max. 10A
Output Power
1 channel
| 12V/60W
24V/120W
36V/180W
Output Power
4 channels
| 12V/120W
24V/240W
36V/360W
Remarks| Constant voltage
RGBW Input Power| 1,2 W
Waterproof grade| IP20
Size (L x W x H)| 178 x 46 x 22 mm
- Repeater dimming signal.
- One channel/three channel/four-channel optional.
- Constant voltage/constant current.
- Power repeater in series to expand output unlimitedly.
Operation:
LED power repeater is suitable for all of our single color & RGB controllers
to expand power output, it supports PWN control and can connect one to three
times more LEDs by adding one more power repeater, and unlimited power
repeaters can be connected together theoretically. The constant voltage power
repeater and contstant current power repeaters can be connected together,
which is convenient for controlling LEDs with different voltage and power.
*When the lifetime of this product will run out, please hand it in to the places for electro-waste. www.mcled.eu