CTA PAD-TPADM Universal Tablet and Phone Adjustable Desk Mount Instruction Manual
- June 15, 2024
- CTA
Table of Contents
CTA PAD-TPADM Universal Tablet and Phone Adjustable Desk Mount
Product Information
The Universal Tablet and Phone Adjustable Desk Mount (PAD-TPADM) is a versatile mount designed to securely hold tablets and phones of various sizes. It offers adjustable features such as portrait and landscape adjustability, tilt adjustability, base swivel adjustability, and cable management. The mount comes with adhesive pads for added stability if needed.
Contents:
- A – Base x1
- B – Articulating Arm x1
- C – Articulating Arm Adapter x2
- D – Phone Holder x1
- E – Dedicated Mount Location x1
- F – Adhesive Pads x4
Product Usage Instructions
Installation:
- Attaching Phone Holder to Articulating Arm
- Rotate the phone holder in the articulating arm adapter until securely tightened.
- Attaching Articulating Arms to Base
- Slide the articulating arm into the dedicated mount location on the base.
- Rotate the screw until moderately tightened with your hand, no extra tools needed. Repeat for the other side.
- Attaching Device to Holder
- Use both hands to extend the holders.
- Make sure that your device size is compatible with each of the holders.
- Insert your device inside the holder and release it to contract it.
- Optional: Attaching Adhesive Pads
- Stick the four adhesive pads below the base as shown for added stability if needed.
Adjustability:
-
Portrait & Landscape Adjustability:
Rotate each holder to the desired orientation. -
Tilt Adjustability:
Rotate each joint to create the desired setup. -
Base Swivel Adjustability:
Rotate the base to the desired angle. Securely tighten the bottom screw to create a more fixed setup.
Cable Management:
Use hooks to route the cable out of the way.
Universal Tablet and Phone Adjustable Desk Mount
CONTENTS
INSTALLATION
- Attaching Phone Holder to Articulating Arm
- 1A. Rotate in the phone holder in the articulating arm adapter until securely tightened.
- Attaching Articulating Arms to Base
- 2A. Slide the articulating arm into the dedicated mount location on the base. Rotate in screw until moderately tightened with your hand, no extra tools needed. Repeat to the other side.
- 2A. Slide the articulating arm into the dedicated mount location on the base. Rotate in screw until moderately tightened with your hand, no extra tools needed. Repeat to the other side.
- Attaching Device to Holder
- 3A. Use both hands to extend the holders. Make sure that your device size is compatible with each of the holder.
- 3B. Insert your device inside the holder and release it to contract it.
- Optional. Attaching Adhesive Pads
- Stick the (4) adhesives (F) below the base as shown for added stability as needed.
- Stick the (4) adhesives (F) below the base as shown for added stability as needed.
FEATURES
-
Portrait & Landscape Adjustability
Rotate each holder to the desired orientation. -
Tilt Adjustability
Rotate each joint to create the desired setup. -
Base Swivel Adjustability
Rotate to the desired angle. Securely tighten the bottom screw to create a more fixed setup. -
Cable Management
Use hooks to route cable out of the way.
36 Taaffe Place Brooklyn, NY 11205 support@ctadigital.com 778-991-0169 www.ctadigital.com