BRANDSTAND CubieMod Charger Flush Mount Power User Manual

BRANDSTAND CubieMod Charger Flush Mount Power

Introduction

Thank you for purchasing the Brandstand CubieMod® 2.0. Please be sure to read this User Manual carefully to ensure proper installation.
The information in this document is subject to change and does not represent a commitment on the part of Brandstand. No part of this document may be reproduced, transmitted in any form or by any means, electronic or mechanical, including photocopying, recording, or information storage and retrieval systems, or translated into any language for any purpose other than the purchaser’s personal use, without the written permission of Brandstand.

Product Features

• Convenient connections for AC and USB powered devices
• Efficient and stylish design with multiple mounting options
• Surge protection through the AC outlets and/or USB Ports

Product Description

• 2 Tamper Resistant 125V AC outlets
• 1 USB-A port
• 1 USB-C port
• Surge Protection
• 1.8m 14AWG Power Cord
• Mounting Hardware Included

Important Safeguards

• CAUTION: Do not install this device if there is not at least 10 meters (30feet) or more of wire between the electrical outlet and the electrical service panel. Ensure the unit is plugged into an AC 125V-60Hz outlet. The use of incorrect outlets could cause the unit to malfunction or catch fire.
• To reduce the risk of fire or electrical shock, do not use this device with a receptacle in which the slot openings do not align with the blades.
• Do not allow children to operate the unit without adult supervision.
• Always ensure the product is unplugged from the electrical outlet before relocating or cleaning it.
• Keep the power cord and product away from heated surfaces.
• The unit should not be exposed to dripping or splashing and no objects filled with liquids, such as vases should be placed on or around the product. It should not be used with aquariums or other water-related products.
• Do not place or drop product into water or other liquids. If product falls into water, immediately unplug it from the electrical outlet.
• Do not put any stress on the power cord where it connects to the product as the power cord could fray and break.
• Do not plug/unplug the product into/from the electrical outlet with a wet hand.
• Do not operate the product if it has a damaged or cut power cord or adapter, if wires are exposed, if it malfunctions, if it is dropped or damaged, or if it is dropped in or exposed to water.
• Place unit where there is good air circulation.
• The product has no user-serviceable parts. Do not attempt to examine or repair this product yourself. Only qualified service personnel should perform the servicing.
• No open flames sources, such as candles should be placed on the product.
• Product should only be used indoors and in dry locations.

Limited 1 Year Warranty

Products are warranted by Brandstand against manufacturing defect in material and workmanship under normal use for one year from the date of purchase. Defective products will be exchanged for the same or comparable item.

Return Policy

For a refund or exchange, products must be returned within 30 days of original purchase date.
Customers must contact Brandstand to obtain a Return Merchandise Authorization (RMA) number and specific shipping instructions prior to returning the product. Any product returned without a RMA will be refused. Product must be in original box with original accessories and packaging undamaged, clean and brand-new condition. Products that are incomplete, damaged or have been used will require a deduction in refund. There is a 30% restocking fee on all returned products. Refunds will be issued by check. Refund checks are mailed the 10th day from the date the product is returned. Delivery charges and customized products are non-returnable.

Disclaimer of Damages

In no event shall Brandstand Products, or its suppliers, be liable for indirect, incidental, or consequential damages, loss of profit, loss of use or data, or interruption of business, whether the alleged damages are labeled in tort, contract, or indemnity, even if Brandstand Products or its suppliers has been advised of the possibility of such damages. Some states do not allow the exclusion or limitation of incidental or consequential damages, so the above limitation may not apply.

Important:

This product’s USB outlets cannot be used as a USB hub and does not transmit data. The powered USB outlets on this unit are intended solely for charging devices that can be charged via a USB interface.

Battery Handling and Usage:

WARNING: Only adults should handle batteries. Do not allow a child to use this product unless Battery Compartment Cover is securely attached to the Battery Compartment in accordance with all product usage instructions.

• Follow the battery manufacturer’s safety and usage instructions.
• Keep batteries away from children and pets.
• Do not mix a new and a used battery or mix batteries of different chemistries or sizes.
• Insert the batteries observing the proper polarity (+/-) as indicated inside the battery compartment. failure to properly align the battery polarity can cause personal injury and/or property damage.
• Remove spent or discharged batteries when not using the product for an extended period.
• Never throw batteries into a fire. Do not expose batteries to fire or other heat sources.
• Dispose or recycle spent/discharged batteries in compliance with all applicable laws. For detailed information, contact your local solid waste authority

Unpacking and Set up:

1. Carefully remove from packaging. Verify that you have all necessary components before you dispose of box and packaging.
   Component List:

• CubieMod Main Unit
• CubieMod Faceplate
• 2 Mounting Brackets, 4 Pan Head Screws, 2 Allen Bolts (Option #1)
• 4 Flat head, Wood Screws .75” (Option #2)

CubieMod – Installed

CubieMod – Installation Guide

Note: This product is designed to be used on a level, stable, flat surface such as a table, desk, shelf or stand, convenient to an AC outlet, out of direct sunlight and away from sources of excess heat, dust, moisture or vibration.

Cut Template

Attached Cut Template (included in box, or found on our website) to desk surface with tape. Follow instructions on CubieMod Cut Template.

1. Position template on furniture surface in desired position.
2. Tape template to surface.
3. Using a 3/8• drill bit drill hole on center target provided.
4. Using a Jig saw, cut opening following the inside of the line.
5. Corners must be square, sand corners if necessary.
6. Place CubieMod in opening and use provided hardware to install.

CubieMod Mounting Option #1 (using brackets provided)

1. Position CubieMod in cutout.
2. Fasten 2 brackets to bottom of unit with 4 machine screws provided.

Measure your desktop of countertop thickness.
Supplied bracket is reversible to accomodate desktop or countertops 1/2” to 2” thick

6. Secure CubieMod to the desk by tightening the 2 allen bolts

7. Plug directly into wall AC outlet. Do not plug into another surge protector or extension cord.

CubieMod Mounting Option #2 (Front Mount)

1. Position CubieMod in cutout.

2. Fasten main unit to table top with 4 flat head, wood screws

3. Snap faceplate to main unit.
   

4. Plug directly into wall AC outlet. Do not plug into another surge protector or extensio

Brandstand 1219 Digital Dr. Suite 100 Richardson, TX 75081, USA 877-843-3681
www.brandstand.com
© 2022 TXS Industrial Design Inc. d.b.a. Brandstand Products CubieMod and Brandstand are registered trademarks of TXS Industrial Design, Inc. in the United States

Technical Specifications

EMI/RFI Filtration 150kHz-1000MHz up to 40db

Continuous Duty Electrical Rating 125VAC 12A 60Hz 1500W

Surge Response Time (ns) <20 ns

Maximum Energy Dissipation 615J L-N 205J L-G 205J N-G 205J

Working Temperature 0-35º C

Maximum Spike Current 24000A L-N 8000A L-G 8000A N-G 8000A

Power Cord 1.8m 14AWG 3-line

UL Clamping Voltage (3-line) UL1449 VPR L-N 1500V, L-G 1500V, N-G 1500V

Housing Material UL94V-0

AC Outlets Output 125V 12A

Working Surroundings Indoor Fixed Moun

Powered USB Output Single USB-C Output (30W Max): 5V 3A or 9V 3A or 12V 2.5A Single USB-A Output (12W Max): 5V 2.4A

Double Port Output (32W Max) USB-C Output(20W Max): 5V 3A or 9V 2.22A or 12V 1.67A USB-A Output (12W Max): 5V 2.4A

Documents / Resources

| BRANDSTAND CubieMod Charger Flush Mount Power [pdf] User Manual
CubieMod Charger Flush Mount Power, CubieMod, Charger Flush Mount Power, Flush Mount Power, Mount Power, Power
---|---

References

• Brandstand Products - Hospitality Products

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>