thermaltake 1000W ToughPower SFX Platinum TT Premium Edition Instructions
- June 1, 2024
- thermaltake
Table of Contents
thermaltake 1000W ToughPower SFX Platinum TT Premium Edition
Product Information
Specifications
- Wattage: 1000W / 850W / 750W
- Main Power Connector (24 Pin): 1
- ATX Connector (4+4 Pin): 2
- SATA Connector (5 Pin): 8
- PCIe Connector (6+2 Pin): 4 (1000W), 2 (850W), 2 (750W)
- PCIe Connector (12+4 Pin): 1 for all wattages
- Peripheral Connector (4 Pin): 4 for all wattages
- Floppy Adapter (4 Pin): 1 for all wattages
Output Specification
Wattage | AC INPUT | DC OUTPUT Max Output Current | Max Output Power |
---|---|---|---|
1000W | 100 – 240V~ | +3.3V 18A, +5V 18A, +12V 83.3A, -12V 0.3A, +5VSB 2.5A |
1000W
850W| 100 – 240V~| +3.3V 18A, +5V 18A, +12V 70.83A, -12V 0.3A, +5VSB 2.5A|
850W
750W| 100 – 240V~| +3.3V 18A, +5V 18A, +12V 62.5A, -12V 0.3A, +5VSB 2.5A| 750W
Installation Steps
- Attach the power supply to the case using the provided mounting screws.
- Connect the main power connector (24 Pin) to the motherboard.
- Connect the ATX connector (4+4 Pin) to the motherboard.
- Connect the SATA, PCIe, and peripheral connectors to the respective devices.
- 5.1 Connect the SATA power connector to devices with a Serial ATA interface.
- 5.2 Connect the 6+2pin or 12+4pin PCI-E power connector to the PCI-E graphics cards if required.
- 5.3 Connect the 4-pin peripheral power connector to peripheral devices if needed.
- Connect the AC power cord to the power supply and turn it on by pushing the switch to the ON position (marked with I).
FAQ
-
Q: Can I use third-party cables with this power supply?
A: No, it is recommended to use only genuine Thermaltake modular cables to prevent damage to your system and voiding of the warranty. -
Q: What should I do if the fan does not operate when my computer is at a low working load?
A: The fan is equipped with Smart Zero Fan technology and will only start running when a certain temperature is reached. It is normal for it not to operate under low loads. -
Q: What protections are offered by this power supply?
A: The power supply offers Over Voltage Protection, Under Voltage Protection, and Over Current Protection to safeguard your components.
Warnings and Caution
- Do not unplug the AC power cord when the power supply is in use. Doing so may cause damage to your components.
- Do not place the power supply in high humidity and /or temperature environment.
- High voltages exist in the power supply. Do not open the power supply case unless you are an authorized service technician or electrician. Doing so will void the warranty.
- The power supply should be powered by the source indicated on the rating label.
- Make sure all cables are plugged in properly. Loos and improper connections would damage the power supply and your system.
- Please use only genuine Thermaltake modular cables with Thermaltake power supply models. Third-party cables might not be compatible and could cause serious damage to your system and power supply. The warranty is voided with the use of third-party cables.
- All warranties and guarantees will be voided, if failure to comply with any of the warnings and cautions covered in this label.
Components Check
- TOUGHPOWER SFX power supply unit
- User manual
- Cable straps x 4
- Matte black SFX to ATX adapter bracket
- Mounting screws x 8
- AC power cord
Power Connector Introduction
Output Specification
Installation Steps
Step 1 Removing Your existing power supply
- Make sure that your system is turned off and unplugged.
- Disconnect the AC power cord from your wall outlet or UPS and the existing power supply.
- Disconnect all the power cables from your graphic card, motherboard, and all other peripherals.
- Follow the directions in your chassis manual and uninstall your existing PSU.
Step 2
- Make sure the power supply’s AC power cable is not connected.
- Install the SFX power supply into the compatible Mini ITX chassis with the only four screws provided; For other cases started from using three screws on the adapter bracket and secure it with SFX power supply and use the other four screws install the power supply into the chassis.
- Connect the 24-pin or 20-pin main power cable to the motherboard.
- Connect the eight-pin +12V (EPS12V) cable to the motherboard.
- If your motherboard has an eight-pin +12V socket, connect the eight-pin cable directly to your motherboard.
- If your motherboard has a four-pin socket, detach the four-pin from the eight-pin cable, and then plug this four-pin cable directly to your motherboard.
- Connect the peripheral cables, PCI-Express cables, and SATA cables.
- Connect the SATA power connector to devices with a Serial ATA interface.
- Connect the 6+2pin or 12+4pin PCI-E power connector to the PCI-E graphics cards if required.
- Connect the 4-pin peripheral power connector to peripherals devices if needed.
- Connect the AC power cord to the power supply and turn it on by pushing the switch to the ON position (marked with “I”).
Attention
As this power supply is equipped with Smart Zero Fan, the fan will start
running when certain temperature is reached. It is a normal if the fan does
not operate when computer is at a low working load.
Total Protection
-
Over Voltage Protection
-
Under Voltage Protection
-
Over Current Protection
-
Short Circuit Protection
Activated when any DC rails short-circuited. -
Over Power Protection
The power supply shall be shut down and latch off, if the wattage of the power supply is 160% ~ 200% over continuous power. -
Over Temperature Protection
Protection temperature is 45℃ ~ 55℃
EMI & SAFETY
Environments
Trouble-Shooting
If the power supply fails to function properly, please follow the troubleshooting guide before service application:
- Is the power cord plugged properly into an electrical outlet and into the power supply AC inlet?
- Please make sure the I/O switch on the power supply is switched to the I position.
- Please make sure all power connectors are properly connected to all the devices.
- If connected to a UPS unit, is the UPS on and plugged in?
If the power supply is still unable to function properly after following the above instructions, please contact your local store or Tt branch office for after-sales service. You may also refer to Thermaltake’s website for more technical support: thermaltake.com
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>