TELTONIKA FMB125 Dual Sim Tracker User Manual

FMB125 Dual Sim Tracker

“`html

Specifications

• Product: FMB125
• Type: Dual-SIM Tracker
• Interfaces: RSR232, RS485

Product Usage Instructions

Know Your Device

The FMB125 device features various interfaces and
components:

• 2X6 Socket
• Status LED
• Dual-SIM capability
• Micro-USB port
• GNSS Antenna Socket
• Battery Socket

Pinout

The pinout details for the 2×6 socket on the FMB125 device:

Wiring Scheme

Details on how to wire various components to the FMB125
device:

Set Up Your Device

1. Remove the FMB125 cover using a plastic pry tool.

2. Insert the Micro-SIM card correctly in the designated
   slot.

3. Connect the battery to the device ensuring it does not obstruct
   other components.

4. Attach the cover back securely.

PC Connection (Windows)

Instructions on connecting the device to a Windows PC:

Configuration

Initial configuration of the FMB125 device and software
setup:

FAQ

How can I change the default factory settings on the FMB125

device?

The default factory settings can be changed using the Teltonika
Configurator software. Make sure to download the latest version
from the provided link and follow the instructions for
configuration.

Where can I find drivers for connecting the FMB125 device to my

Windows PC?

You can download the COM port drivers from the provided link.
Follow the installation steps to set up the drivers for proper
communication between your device and computer.

“`

FMB125
Dual-SIM tracker with RSR232, RS485 interfaces
Quick Manual v1.8

CONTENT
Know your device…………………………………………………………………………………………………………………………………………………………………………3 Pinout ………………………………………………………………………………………………………………………………………………………………………………………….4 Wiring scheme……………………………………………………………………………………………………………………………………………………………………………..5 Set up your device ……………………………………………………………………………………………………………………………………………………………………….6 PC Connection (Windows)…………………………………………………………………………………………………………………………………………………………….7 How to install USB drivers (Windows) …………………………………………………………………………………………………………………………………………..7 Configuration……………………………………………………………………………………………………………………………………………………………………………….8 Quick SMS configuration…………………………………………………………………………………………………………………………………………………………… 10 Mounting recommendations…………………………………………………………………………………………………………………………………………………….. 12 LED indications…………………………………………………………………………………………………………………………………………………………………………. 13 Basic characteristics …………………………………………………………………………………………………………………………………………………………………. 13 Electrical characteristics……………………………………………………………………………………………………………………………………………………………. 16 Safety information …………………………………………………………………………………………………………………………………………………………………… 18 Certification and Approvals ………………………………………………………………………………………………………………………………………………………. 19 Warranty ………………………………………………………………………………………………………………………………………………………………………………….. 21 Warranty disclaimer …………………………………………………………………………………………………………………………………………………………………. 21
Quick Manual v1.8 // FMB125 2

KNOW YOUR DEVICE

TOP VIEW
2X6 SOCKET

BOTTOM VIEW (WITHOUT COVER) TOP VIEW (WITHOUT COVER)

MICRO-USB

GNSS ANTENNA SOCKET

BATTERY SOCKET

STATUS LED

DUAL-SIM

Quick Manual v1.8 // FMB125 3

PINOUT

PIN NUMBER 1

PIN NAME
VCC (10-30) V DC (+)

2

AIN 1

3

RS232 ­ RX

4

RS232 ­ TX

5

DIN 1

6

INPUT 6

7

GND (-)

8

DOUT 1

9

RS485 ­ A

10

RS485 ­ B

11

1WIRE DATA

12

INPUT 5

DESCRIPTION
Power supply (+10-30 V DC).
Analog input, channel 1. Input range: 0-30 V DC.
Input for data receive through RS232
Output for data transmit through RS232
Digital input, channel 1.
TX EXT (LVCAN ­ TX).
Ground pin. (10-30) V DC
Digital output, channel 1. Open collector output. Max. 0,5 A DC
Signal A wire for RS485
Signal B wire for RS485
Data for 1­Wire devices.
RX EXT (LVCAN – RX).

INPUT 6

6

DIN1

5

RS232-TX

4

RS232-RX

3

AIN1

2

+10…30 V DC 1

FMB125 2×6 socket pinout

12

INPUT 5

11 1WIRE DATA

10 RS485-B

9

RS485-A

8

DOUT1

7

GND

Quick Manual v1.8 // FMB125 4

WIRING SCHEME

IGNITION DETECTION
87 87a 86 85 30
STARTER

ALARM BUTTON

RFID

FUEL GAUGE
ANALOG LLS SENSOR

IRIDIUM EDGE®
GARMIN
RS232 LLS SENSOR

CAN-CONTROL

INPUT 6

6

DIN1

5

RS232-TX

4

RS232-RX

3

AIN1

2

+10…30 V DC 1

12

INPUT 5

11 1WIRE DATA

10 RS485-B

9

RS485-A

8

DOUT1

7

GND

POWER SUPPLY 10 – 30V DC

IBUTTON

MULTIPLE RS485 LLS SENSORS

BUFFERED TRANSPARENT
MODE

BUZZER

Quick Manual v1.8 // FMB125 5

SET UP YOUR DEVICE
HOW TO INSERT MICRO-SIM CARD AND CONNECT THE BATTERY

1 COVER REMOVAL

2 MICRO-SIM CARD INSERT

3 BATTERY CONNECTION

4 ATTACHING COVER BACK

Gently remove FMB125 cover using plastic pry tool from both sides.

Insert SIM card as shown with PIN request disabled or read our Wiki1 how to enter it later in Teltonika Configurator2. Make sure that SIM card cut-off corner is pointing outward from slot. SIM slot 1 is closer to PCB, SIM slot 2 is the top one.
1wiki.teltonika-gps.com/view/ FMB125_Security_info
2wiki.teltonika-gps.com/view/ Teltonika_Configurator

Connect battery as shown to device. Position the battery in place where it does not obstruct other components.

After configuration, see “PC Connection (Windows)1”, attach device cover back.
1Page 7, “PC Connection (Windows)”

Quick Manual v1.8 // FMB125 6

PC CONNECTION (WINDOWS)
1. Power-up FMB125 with DC voltage (10 ­ 30 V) power supply using supplied power cable. LED’s should start blinking, see “LED indications1”.
2. Connect device to computer using Micro-USB cable or Bluetooth® connection: · Using Micro-USB cable · You will need to install USB drivers, see “How to install USB drivers (Windows)2” · Using Bluetooth® wireless technology · FMB125 Bluetooth® technology is enabled by default. Turn on Bluetooth® connection on your PC, then select Add Bluetooth or other device > Bluetooth. Choose your device named ­ “FMB125_last_7_imei_digits”, without LE in the end. Enter default password 5555, press Connect and then select Done.
3. You are now ready to use the device on your computer.
1wiki.teltonika-gps.com/view/FMB125_LED_status 2Page 6, “How to install USB drivers”
HOW TO INSTALL USB DRIVERS (WINDOWS)
1. Please download COM port drivers from here1. 2. Extract and run TeltonikaCOMDriver.exe. 3. Click Next in driver installation window. 4. In the following window click Install button. 5. Setup will continue installing the driver and eventually the confirmation window will appear. Click Finish to complete the
setup.
1teltonika.lt/downloads/en/FMB125/TeltonikaCOMDriver.zip
Quick Manual v1.8 // FMB125 7

CONFIGURATION
At first FMB125 device will have default factory settings set. These settings should be changed according to the users needs. Main configuration can be performed via Teltonika Configurator1 software. Get the latest Configurator version from here2. Configurator operates on Microsoft Windows OS and uses prerequisite MS .NET Framework. Make sure you have the correct version installed.
1wiki.teltonika-gps.com/view/Teltonika_Configurator 2wiki.teltonika- gps.com/view/Teltonika_Configurator_versions

MS .NET REQUIREMENTS
Operating system
Windows Vista Windows 7 Windows 8.1 Windows 10

MS .NET Framework version Version

MS .NET Framework 4.6.2

32 and 64 bit

1dotnet.microsoft.com/en-us/download/dotnet-framework/net462

Links www.microsoft.com1

Quick Manual v1.8 // FMB125 8

Various Status window1 tabs display information about GNSS2, GSM3, I/O4, Maintenance5 and etc. FMB125 has one user editable profile, which can be loaded and saved to the device. After any modification of configuration the changes need to be saved to device using Save to device button. Main buttons offer following functionality:

Downloaded Configurator will be in compressed archive.
Extract it and launch Configurator.exe. After launch software
language can be changed by clicking in the right bottom corner.

Load from device ­ loads configuration from device. Save to device ­ saves configuration to device. Load from file ­ loads configuration from file.

FMB125 Configuration process begins by pressing on connected device.

Save to file ­ saves configuration to file. Update firmware ­ updates firmware on device. Read records ­ reads records from the device.

FMB125
After connection to Configurator Status window will be displayed.

Reboot device ­ restarts device.
Reset configuration ­ sets device configuration to default.
Most important configurator section is GPRS ­ where all your server and GPRS setttings6 can be configured and Data Acquisition7 ­ where data acquiring parameters can be configured. More details about FMB125 configuration using Configurator can be found in our Wiki8. 1wiki.teltonika- gps.com/view/FMB125_Status_info 2wiki.teltonika- gps.com/view/FMB125_Status_info#GNSS_Info 3wiki.teltonika- gps.com/view/FMB125_Status_info#GSM_Info 4wiki.teltonika- gps.com/view/FMB125_Status_info#I.2FO_Info 5wiki.teltonika- gps.com/view/FMB125_Status_info#Maintenance 6wiki.teltonika- gps.com/index.php?title=FMB125_GPRS_settings 7wiki.teltonika- gps.com/index.php?title=FMB125_Dataacquisition settings 8wiki.teltonika- gps.com/index.php?title=FMB125_Configuration
Quick Manual v1.8 // FMB125 9

QUICK SMS CONFIGURATION

Default configuration has optimal parameters present to ensure best performance of track quality and data usage. Quickly set up your device by sending this SMS command to it:

« setparam 2001:APN;2002:APN_username;2003:APN_password;2004:Domain;2005:Port;2006:0»

1

2

3

4

5

6

Note: Before SMS text, two space symbols should be inserted.

GPRS SETTINGS: 1 2001 ­ APN

2 2002 ­ APN username (if there are no APN username, empty field should be left)

3

2003 ­ APN password (if there are no APN password, empty field should be left)

SERVER SETTINGS: 4 2004 ­ Domain 5 2005 ­ Port 6 2006 ­ Data sending protocol (0 ­ TCP, 1 ­ UDP)

Quick Manual v1.8 // FMB125 10

DEFAULT CONFIGURATION SETTINGS
MOVEMENT AND IGNITION DETECTION:

DEVICE MAKES A RECORD ON MOVING IF ONE OF THESE EVENTS HAPPEN:

VEHICLE MOVEMENT will be detected by accelerometer

IGNITION will be detected by vehicle power voltage between 13,2 ­ 30 V

DEVICE MAKES A RECORD ON STOP IF:

RECORDS SENDING TO SERVER:

PASSES 300 seconds

VEHICLE DRIVES 100 meters

VEHICLE TURNS 10 degrees

SPEED DIFFERENCE between last coordinate and current position is greater than 10 km/h

1 HOUR PASSES while vehicle is stationary and ignition is off

EVERY 120 SECOND it is sent to the server If device has made a record

After successful SMS configuration, FMB125 device will synchronize time and update records to configured server. Time intervals and default I/O elements can be changed by using Teltonika Configurator1 or SMS parameters2.
1wiki.teltonika-gps.com/view/Teltonika_Configurator 2wiki.teltonika- gps.com/view/Template:FMB_Device_Family_Parameter_list
Quick Manual v1.8 // FMB125 11

MOUNTING RECOMMENDATIONS
CONNECTING WIRES
· Wires should be fastened to the other wires or non-moving parts. Try to avoid heat emitting and moving objects near the wires.
· The connections should not be seen very clearly. If factory isolation was removed while connecting wires, it should be applied again.
· If the wires are placed in the exterior or in places where they can be damaged or exposed to heat, humidity, dirt, etc., additional isolation should be applied.
· Wires cannot be connected to the board computers or control units.
CONNECTING POWER SOURCE
· Be sure that after the car computer falls asleep, power is still available on chosen wire. Depending on car, this may happen in 5 to 30 minutes period.
· When module is connected, measure voltage again to make sure it did not decrease. · It is recommended to connect to the main power cable in the fuse box. · Use 3A, 125V external fuse.
CONNECTING IGNITION WIRE
· Be sure to check if it is a real ignition wire i. e. power does not disappear after starting the engine. · Check if this is not an ACC wire (when key is in the first position, most of the vehicle electronics are available). · Check if power is still available when you turn off any of vehicles devices. · Ignition is connected to the ignition relay output. As alternative, any other relay, which has power output when ignition is on,
may be chosen.
CONNECTING GROUND WIRE
· Ground wire is connected to the vehicle frame or metal parts that are fixed to the frame. · If the wire is fixed with the bolt, the loop must be connected to the end of the wire. · For better contact scrub paint from the spot where loop is going to be connected.
Quick Manual v1.8 // FMB125 12

LED INDICATIONS

BASIC CHARACTERISTICS

NAVIGATION LED INDICATIONS

BEHAVIOUR
Permanently switched on
Blinking every second

MEANING GNSS signal is not received Normal mode, GNSS is working

GNSS is turned off because:

Off

Device is not working or Device is in

sleep mode

Blinking fast constantly

Device firmware is being flashed

STATUS LED INDICATIONS

BEHAVIOUR
Blinking every second
Blinking every two seconds
Blinking fast for a short time
Off

MEANING Normal mode
Sleep mode
Modem activity Device is not working or Device is in boot mode

MODULE Name Technology

Teltonika TM2500 GSM/GPRS/GNSS/Bluetooth® LE

GNSS
GNSS
Receiver Tracking sensitivity Accuracy Hot start Warm start Cold start Cold start

GPS, GLONASS, GALILEO, BEIDOU, SBAS, QZSS, DGPS, AGPS 33 channel -165 dBM < 3 m < 1 s < 25 s < 35 s < 35 s

CELLUAR Technology 2G bands

GSM
Quad-band 850 / 900 / 1800 / 1900 MHz

Quick Manual v1.8 // FMB125 13

Data transfer Data support

GPRS Multi-Slot Class 12 (up to 240 kbps), GPRS Mobile Station Class B
SMS (text/data)

POWER

Input voltage range

10-30 V DC with overvoltage protection

Back-up battery

170 mAh Li-Ion battery 3.7 V (0.63 Wh)

Internal fuse

3 A, 125 V

Power consumption

At 12V < 6 mA (Ultra Deep Sleep1) At 12V < 6.5 mA (Deep Sleep1) At 12V < 7 mA (Online Deep Sleep1) At 12V < 12 mA (GPS Sleep3) At 12V < 38 mA (nominal with no load)
At 12V < 1.0 A Max. (with full Load/ Peak)

BLUETOOTH® TECHNOLOGY

Specification

4.0 + LE

Supported peripherals

Temperature and Humidity sensor2, Headset3, OBDII dongle4, Inateck Barcode Scanner, Universal Bluetooth® LE sensors support

1wiki.teltonika-gps.com/view/FMB125_Sleep_modes
2teltonika-gps.com/products/accessories
3wiki.teltonika-gps.com/view/How_to_connect_Bluetooth_HandsFree adapter_to_FMB_device
4wiki.teltonika-gps.com/view/How_to_connect_OBD_IIBluetooth Dongle_to_FMB_device

INTERFACE

Digital Inputs

1

Digital Outputs

1

Analog Inputs

1

CAN Adapter inputs 1

1-Wire

1

RS232

1

RS485

1

GNSS antenna

External (MMCX connector)

GSM antenna

Internal High Gain

USB

2.0 Micro-USB

LED indication

2 status LED lights

SIM

Dual SIM

Memory

128MB internal flash memory

PHYSICAL SPECIFICATION

Dimensions

65 x 56,6 x 20,6 mm (L x W x H)

Weight

55 g

OPERATING ENVIRONMENT

Operating temperature (without battery)

-40 °C to +85 °C

Quick Manual v1.8 // FMB125 14

Storage temperature (without battery)

-40 °C to +85 °C

Operating humidity 5% to 95% non-condensing

Ingress Protection Rating

IP41

Battery charge temperature

0 °C to +45 °C

Battery discharge temperature

-20 °C to +60 °C

Battery storage temperature

-20 °C to +45 °C for 1 month -20 °C to +35 °C for 6 months

FEATURES Sensors
Scenarios
Sleep modes

Accelerometer
Green Driving, Over Speeding detection, Jamming detection, GNSS Fuel Counter, DOUT Control Via Call, Excessive Idling detection, Immobilizer, iButton Read Notification, Unplug detection, Towing detection, Crash detection, Auto Geofence, Manual Geofence, Trip5
GPS Sleep, Online Deep Sleep, Deep Sleep, Ultra Deep Sleep6

5wiki.teltonika-gps.com/view/FMB125_Features_settings 6wiki.teltonika- gps.com/view/FMB125_Sleep_modes

Configuration and firmware update
SMS GPRS commands Time Synchronization Fuel monitoring
Ignition detection
RS232
RS485

FOTA Web7, FOTA, Teltonika Configurator8 (USB, Bluetooth® wireless technology), FMBT mobile application (Configuration)
Configuration, Events, DOUT control, Debug
Configuration, DOUT control, Debug
GPS, NITZ, NTP
LLS (Analog), LV-CAN2009, ALLCAN30010, OBDII dongle11, RS232/ RS485 fuel sensor, CAN-CONTROL12
Digital Input 1, Accelerometer, External Power Voltage, Engine RPM (CAN Adapters, OBDII dongle)
Log Mode, NMEA, LLS, LCD, RFIH HID/MF7, Garmin FMI, TCP SCII/ Binary
Log Mode, NMEA, LLS, TCP SCII/ Binary

7wiki.teltonika-gps.com/view/FOTA_WEB 8wiki.teltonika- gps.com/view/Teltonika_Configurator 9teltonika-gps.com/products/trackers/can- obd-data/lv-can200 10teltonika-gps.com/products/trackers/can-obd-data/all- can300 11wiki.teltonika-gps.com/view/How_to_connect_OBD_IIBluetooth Dongle_to_FMB_device 12teltonika-gps.com/products/trackers/can-obd-data/can- control
Quick Manual v1.8 // FMB125 15

ELECTRICAL CHARACTERISTICS

CHARACTERISTIC DESCRIPTION

VALUE

MIN.

TYP. MAX.

UNIT

SUPPLY VOLTAGE

Supply Voltage

(Recommended

+10

Operating Conditions)

+30

V

DIGITAL OUTPUT (OPEN DRAIN GRADE)

Drain current (Digital Output OFF)

120

µA

Drain current (Digital Output ON, Recommended Operating Conditions)

0.1

0.5

A

Static Drain-Source resistance (Digital Output ON)

400 600

m

DIGITAL INPUT

Input resistance (DIN1) 47

Input voltage

(Recommended

0

Operating Conditions)

Input Voltage threshold (DIN1)

k

Supply voltage

V

7.5

V

CHARACTERISTIC DESCRIPTION
MIN.

ANALOG INPUT

Input voltage

(Recommended Operating Conditions),

0

Range 1

Input resistance, Range 1

Measurement error on 12V, Range 1

Additional error on 12 V, Range 1

Measurement error on 30 V, Range 1

Additional error on 30 V, Range 1

Input Voltage

(Recommended Operating Conditions),

0

Range 2

Input resistance, Range 2

Measurement error on 12 V, Range 2
Additional error on 12 V, Range 2

VALUE

TYP.

MAX. UNIT

+10

V

38.45

k

0.9

%

108

mV

0.33

%

88

mV

+30

V

150

k

0.9

%

108

mV

Quick Manual v1.8 // FMB125 16

CHARACTERISTIC DESCRIPTION
MIN.
Measurement error on 30 V, Range 2
Additional error on 30 V, Range 2

VALUE

TYP.

MAX. UNIT

0.33

%

88

mV

OUTPUT SUPPLY VOLTAGE 1-WIRE

Supply voltage

+4.5

Output inner resistance

7

Output current (Uout > 3.0 V)

30

Short circuit current (Uout = 0)

75

+4.7

V

mA

mA

Quick Manual v1.8 // FMB125 17

SAFETY INFORMATION
This message contains information on how to operate FMB125 safely. By following these requirements and recommendations, you will avoid dangerous situations. You must read these instructions carefully and follow them strictly before operating the device!
· The device uses SELV limited power source. The nominal voltage is +12 V DC. The allowed voltage range is +10…+30 V DC.
· To avoid mechanical damage, it is advised to transport the device in an impact-proof package. Before usage, the device should be placed so that its LED indicators are visible. They show the status of device operation.
· When connecting the 2×6 connector wires to the vehicle, the appropriate jumpers of the vehicle power supply should be disconnected.
· Before unmounting the device from the vehicle, the 2×6 connector must be disconnected. The device is designed to be mounted in a zone of limited access, which is inaccessible to the operator. All related devices must meet the requirements of EN 62368-1 standard.
· The device FMB125 is not designed as a navigational device for boats.

Do not disassemble the device. If the device is damaged, the power supply cables are not isolated or the isolation is damaged, DO NOT touch the device before unplugging the power supply.
All wireless data transferring devices produce interference that may affect other devices which are placed nearby.
The device must be connected only by qualified personnel.
The device must be firmly fastened in a predefined location.
The programming must be performed using a PC with autonomic power supply.
Installation and/or handling during a lightning storm is prohibited.
The device is susceptible to water and humidity.
Risk of explosion if battery is replaced by an incorrect type. Dispose of used batteries according to the instructions.
Battery should not be disposed of with general household waste. Bring damaged or worn-out batteries to your local recycling center or dispose them to battery recycle bin found in stores.
Quick Manual v1.8 // FMB125 18

CERTIFICATION AND APPROVALS

This sign on the package means that it is necessary to read the Users Manual before your start using the device. Full Users Manual version can be found in our Wiki1.
1wiki.teltonika-gps.com/index.php?title=FMB125

Hereby, Teltonika declare under our sole responsibility that the above described product is in conformity with the relevant Community harmonization: European Directive 2014/53/EU (RED).

E-Mark and e-Mark are the European conformity marks issued by the transport sector, indicating that the products comply with relevant laws and regulations or directives. Vehicles and related products need to go through the E-Mark certification process to be legally sold in Europe.

REACH

REACH addresses the production and use of chemical substances, and their potential impacts on both human health and the environment. Its 849 pages took seven years to pass, and it has been described as the most complex legislation in the Union’s history and the most important in 20 years. It is the strictest law to date regulating chemical substances and will affect industries throughout the world.

The Independent Communications Authority of South Africa (ICASA) is the official regulator of the South African communications, broadcasting and postal services sectors.

This sign on the package means that all used electronic and electric equipment should not be mixed with general household waste.
UK Conformity Assessed (UKCA) marking is a conformity mark that indicates conformity with the applicable requirements for above described products sold within Great Britain.
The Declaration EAC and the Certificate EAC in conformity with the technical regulation TR CU of the EurAsEC Customs Union are EAC certification documents issued by independent organizations. Such organizations perform their function through laboratories accredited to the public agencies in charge of the supervision of metrology and standardization in the three countries of the EAC Custom Union, joining at the moment the certification system : Russia, Belarus, Kazakhstan, Armenia and Kyrgyzstan.
The RoHS1 is a directive regulating the manufacture, import and distribution of Electronics and Electrical Equipment (EEE) within the EU, which bans from use 10 different hazardous materials (to date).
SIRIM QAS International Sdn. Bhd. is Malaysia’s leading testing,inspection and certification body.
The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by UAB Teltonika Telematics is under license. Other trademarks and trade names are those of their respective owners.
Quick Manual v1.8 // FMB125 19

DECLARATION OF DEVICE OPERATION TEMPERATURE
An operating temperature is the temperature at which an electrical or mechanical device operates. The device will operate effectively within a specified temperature range which varies based on the device function and application context, and ranges from the minimum operating temperature to the maximum operating temperature (or peak operating temperature). Outside this range of safe operating temperatures the device may fail.
DECLARATION OF IMEI ASSIGNMENT
The IMEI number is used by a GSM network to identify valid devices and therefore can be used for stopping a stolen phone from accessing that network. For example, if a mobile phone is stolen, the owner can call their network provider and instruct them to blacklist the phone using its IMEI number. This renders the phone useless on that network and sometimes other networks too, whether or not the phone’s subscriber identity module (SIM) is changed.

Para maiores informações, consulte o site da ANATEL www.anatel.gov.br Este equipamento não tem direito à proteção contra interferência prejudicial e não pode causar interferência em sistemas devidamente autorizados.
For more information, see the ANATEL website www.anatel.gov.br This equipment is not entitled to protection against harmful interference and must not cause interference in duly authorized systems.
SDPPI (Direktur Jenderal Sumber Daya dan Perangkat Pos dan informatika) is Indonesian Directorate General of Resources and Equipment for Post and Information Technology.
CHECK ALL CERTIFICATES
All newest certificates may be found in our Wiki2. 2 wiki.teltonika- gps.com/view/FMB125Certification%26_Approvals

Quick Manual v1.8 // FMB125 20

WARRANTY
We guarantee our products 24-month warranty1 period. All batteries carry a 6-month warranty period. Post-warranty repair service for products is not provided. If a product stops operating within this specific warranty time, the product can be: · Repaired · Replaced with a new product · Replaced with an equivalent repaired product fulfilling the same functionality · Replaced with a different product fulfilling the same functionality in case of EOL for the original product
1Additional agreement for an extended warranty period can be agreed upon separately.
WARRANTY DISCLAIMER
· Customers are only allowed to return products as a result of the product being defective, due to order assembly or manufacturing fault.
· Products are intended to be used by personnel with training and experience. · Warranty does not cover defects or malfunctions caused by accidents, misuse, abuse, catastrophes, improper maintenance
or inadequate installation ­ not following operating instructions (including failure to heed warnings) or use with equipment with which it is not intended to be used. · Warranty does not apply to any consequential damages. · Warranty is not applicable for supplementary product equipment (i. e. PSU, power cables, antennas) unless the accessory is defective on arrival. · More information on what is RMA1
1wiki.teltonika-gps.com/view/RMA_guidelines
Quick Manual v1.8 // FMB125 21

References

• Download .NET Framework 4.6.2 | Free official downloads
• Anatel — Agência Nacional de Telecomunicações

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>