picun R2 Vintage Over Ear Wireless Headphones User Manual

picun R2 Vintage Over Ear Wireless Headphones

Product Specifications:

• Weight : 70g
• Dimensions : 73mm x 105mm

Product Information:
The Picun R2 Vintage Over-Ear Wireless Headphones are designed for high- quality audio performance and convenience. Featuring a stylish design, these headphones offer Bluetooth connectivity and various functions for easy use.

Product Usage Instructions

Headphone LED Indicator:

• Power On Pairing Mode: Blue LED stays on continuously
• Standby Mode: Blue LED stays on continuously
• Low Battery Status: Red LED flashes 1 time every 5 seconds
• Charging Mode: Charging – red LED lights up fully charged – red LED goes off

Outline and Functions of Headphone Appearance:

1. Play/Pause
2. Microphone for calls
3. USB-C charging port
4. Multi-function button
5. BT Indicator light
6. Volume Down/Previous Track
7. Volume Up/Next Track

Basic Operation of BT Earphones:

1. Power On: Long press the play/pause button for 3 seconds. The earphones will turn on and enter pairing mode.
2. Power Off: Long press the play/pause button for 3 seconds to shut down the earphones.
3. BT Connection Mode: Pair with your mobile phone by searching for the device name “picun R2”.
4. Volume Adjustment: Use the plus and minus buttons to adjust volume.
5. Song Selection: Skip to the previous or next track using the corresponding buttons.
6. Play/Pause/Answer Call: Control music playback and answer calls with the play/pause button.

Two-Device Connection Method: Connect to the first mobile phone, then switch to the second mobile phone by putting the headphones into pairing mode again.

Automatic Power Off and Reconnection at a Distance:
If out of range, headphones will disconnect and automatically reconnect within 5 minutes upon return. After 5 minutes, they will power off.

Low Latency Function:
In any mode, triple-press the ANC button to enter low latency mode. Repeat the action to exit low latency mode.

Headphone LED Indicator

• Power On Blue LED stays on continuously and enters pairing mode
• Pairing Mode Red/blue LEDs flash alternately
• Standby Mode Blue LED stays on continuously
• Red LED flashes 1 times every 5 seconds
• Charging – red LED lights up fully charged – red LED goes off

Outline and Functions of Headphone Appearance

FAQ

How do I know if the headphones are in pairing mode?
When the blue LED stays on continuously, the headphones are in pairing mode.

How can I adjust the volume?
Short press/Long press the plus button for 1 second to increase the volume. Short press/Long press the minus button for 1 second to decrease the volume.

Can I connect the headphones to two devices simultaneously?
Yes, follow the Two-Device Connection Method outlined in the user manual.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>