picun ANC-01 Neckband Noise-Canceling Headphone User Manual

ANC – 01
USER MANUAL

LED Indicator Description

music playing
Turn On Status| orange and white LED twinkle alternately
Standby Mode| white LED stays on indefinitely
Charging Status| orange LED light on in charging, orange LED goes out while fully charged
ANC Mode| ANC on: green LED on
ANC off: green LED goes out

Basic Key Operation

Turn On
Long press for 3 seconds and the headphone will be turned on after the white LED light is on for 3 seconds.

Turn Off
Long press for 5 seconds and the headphone will be turned off after the orange LED light is on for 3 seconds. Also, the ANC is off.

Bluetooth Connection
The headphone will enter into Bluetooth pairing mode automatically after being turned on. Turn on the Bluetooth on your cell phone and search “ANC-01”, and click to connect. If disconnected, the headphone will automatically enter into pairing status, and they can connect with other Bluetooth devices.

Volume Adjustment

Short press + and – to control volume

Music Selection
Long press + for skipping – to the next song
Long press + for skipping – to the previous song

Play/Pause/Phone call
Music Pause: Short press + it when music playing.
Music Play: Short press + when in music paused.
Answer Calls: Short press + when a call comes in.
Hang Up: Short press Cwhen end up a call.

Refuse to Answer: Long press when a call comes in

Active Noise Cancelling Mode
In any mode, long press + , it will voice prompt “ANCON” to turn on the ANC function. Long press +  again, it will voice prompt “ANC OFF” to turn off the ANC function.

Headphone Turn On Status
Long press + for 3 seconds, the headphone will be turned on, orange and white LED twinkle alternately, and enter into pairing mode.

Bluetooth Pairing

The headphone will enter into Bluetooth pairing mode automatically after being turned on. Orange and white LED twinkle alternately. Turn on the Bluetooth on your cell phone and search “ANC-01”, and click to connect. The white LED will stay on indefinitely after connecting successfully, the white LED will flash slowly in the music playing.

Auto-off and Long-distance Reconnect

1. When Bluetooth headphones are disconnected, they will auto-off after 5
2. The headphone will hint disconnected when out of the effective range. And when back to effective range within 5 minutes, it will auto-connect with your (Disconnected for over 5 mins will auto-off)

Note: The Bluetooth headphone won’t be turned off when ANC is on.

Language Switch
Turn on the headphone and don’t connect them with any devices, double click the li button for switching the language between Chinese and English.

Charging Mode

When in low battery, please charge it for around 2 hours with TYPE-C charging cable. The headphones will turn off automatically when in charging. The Orange LED light is on in charging, and it will go out while fully charged.

Clear the Bluetooth Connection Information

When Bluetooth is connected, and not in the status of a phone call. Simultaneously long press + and — for 5 seconds to clear the Bluetooth connection information.

Siri/Voice Assistant Access
In the status of the headphone connect with your cell phone and not in a call, double click the 14, button to access Siri/voice assistant.

Power Status
When the headphone connects with the IOS device, the current power status of the headphone will be shown on the upper right comer of the device screen.

Headphone Overview

Parameters Information

Packing List

Warm Tips

1. Please charge the headphone with a 5V 1A/5V 2A charger, high voltage may damage the headphone.
2. When the headphone has not been used for more than 3 months, it needs to be charged before use.
3. When the headphone has not been used for a long time, we suggest you charge them every 3 months to provide good protection for the battery.
4. We suggest you fully charged the headphone for the first time.

Attentions

1. Please keep or use the headphone at normal temperature, avoid direct
2. Please keep the headphone away from fire or another hot object.
3. Please keep the headphone away from a damp place or submerged in liquid, keep
4. Please don’t try to use another method for charging other than the USB charging cable we
5. Please don’t disassemble, repair or modify.
6. Please pay attention to excessive clash, if any damage (like dents, deformation, corrosion, etc.), please turn to us for help by the contact information on the warranty
7. If the headphone produces an abnormal smell, higher than normal temperature, color or shape changes abnormally, please stop use and turn to us for help by the contact information on the warranty

Warning

1. If the battery is replaced improperly, there is a danger of explosion. It can only be replaced with a battery of the same type or The battery (battery pack or assembled battery) must not be exposed to the conditions such as sunlight, fire, or a similar overheating environment.
2. The device should not be exposed to water droplets or water It should not be placed in objects such as vases or similar objects filled with liquids.
3. This device is not a children’s toy. Children under the age of 14 need to be accompanied by parents to
4. Using headphones for a long time at a high volume may cause damage to your

WARRANTY CARD

Purchase Account:——————-Reason for Warranty:——————–
Purchase Date:————————Purchase Store:—————————–

User Name:————————–Phone Number:——————————

User Address:————————————————-

Warranty Description

Please keep the warranty card and valid purchase proof properly, and show them together when sending the product to repair. If you can’t provide the warranty card or relevant purchase certificate, the calculation date of the product warranty will be based on the product manufacture date.

Warranty Regulations

1. If you have any questions during use, please don’t hesitate to call 4008894883 for help.
2. Within one year from the purchase date, If the product with quality Issue and the technical staff of our company has confirmed that the issue occurs under normal use, we will provide free replacement services.
3. In the following cases, our company refuses to provide a free warranty Semite. only provides maintenance services, free of labor costs, only charges for parts:
4. The product’s main pan has been damaged due to Incorrect operation, negligent use, or Irresistible reasons
5. The product has been dismantled or repaired without our company’s authorization
6. The headphone driver unit has been used at high volume, and the diaphragm Is deformed due to debris or impact. The headphone cable is broken, crushed, immersed in water, the case is damaged, deformed, and some other man-made damage reason.
7. The original warranty card and valid purchase proof can’t be provided, and the purchase date IS beyond the warranty period.
8. The free service provided by this warranty card does not Include product accessories, other decorations, gifts, etc.

Product Qualification Certificate After inspection, the product meets the technical standards and is allowed to leave the factory.|
---|---

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>