Picun PG-01 Wireless Gaming Headset User Manual

PG-01

USER MANUAL

LED Indicator Description

Basic key description

1. Mute button
2. Indicator
3. Mode Switch Button
4. Power/Calls
5. Pause/Play/previous/next track
6. Volume Wheel
7. USB-C charging port
8. 3.5mm audio jack
9. Flexible Microphone
10. Microphone indicator
11. Multifunction button
12. USB-A

Power On
Press and hold for 2 seconds to power on. Indicator will flash in red and blue.

Power Off
Press and hold for 2 seconds to power off.

Volume Control
Rolling the button + to volume up or – down.

Songs Track
Click twice for next track.
Click 3 times for previous track.

Multifunction Button
Click for music pause.
Click for music play.
Click to accept a call.
Click to hang up a call.
Click twice to reject a call.

Mute/Activate Microphone

1. Turn the toggle switch up to activate the microphone (the microphone indicator steady on), and turn the toggle switch down mute the microphone (the microphone indicator light goes off)

Headphone Charging
Please charge the headset for about 2 hours at low-bat-tery status, while charging, the headset default to power off. indicator steady red and go off after fully charged.

Battery Status
When connected with an 105 device, the battery status will show on the upper right corner of the screen.

Line-in Mode
After plugging the aux cable into the headset, it will default to power off. Microphone still available. Noye: Headset could not be turned on with aux cable in.

Wireless Mode
Powering on the headset, the indicator will flash in red and blue.Press and hold”M” for 3 seconds to switch to BT mode. Open the wireless feature and search the device named “PG-01”, click the name to complete connection.

Connect with Dongle
Press and hold “M” for 3 seconds to switch to dongle mode.
The headset will connect to the dongle auto.

Note:

1. Under the Dongle mode, no need to press and hold the headset.
2. Click the dongle 8 time, Hold and press the power button and “M” button to reset the headset and dongle.

Automatic shutdown and over-distance reconnection
Headphones will reconnect to the phones when it comes back to effective distance within 5 minutes, or turn off after 5 minutes.

USB-A Dongle

Indicator on Dongle

Connect with PC

1. Plug USB dongle into PC, indicator will flash in blue and stand by pairing.
2. Press to Power on the headset, and press the “M” button to switch to Dongle mode from BT mode.
3. The indicator on the headset and dongle steady blue means connected.
4. If the headset and microphone are unavailable, Please set the PG-01 as the audio output and input device.

Use on Playstation 4/ 4 pr,PS5

1. Turn on your Playstation 4/5.
2. Plug the usb dongle, indicator flashes in blue and orange.
3. Press to Power on the headset, and press the “M” button to switch to Dongle mode from BT mode.
4. The indicator on the headset and dongle steady blue means connected.
5. When the “PG-01” wireless headset is detected, navigate to the “Settings” menu and select.
6. Select “Setting”
7. Scroll down and select “Peripherals”
8. Scroll down and select “Audio device”
9. Set the wireless headset “PG-01” as input device.
10. Set the wireless headset “PG-01” as output device.
11. Select “Output to headphone” and “All audio”

Headset Reconnect to Dongle
Under the Dongle Mode, Headset will reconnect to the dongle automatically.

Reset the dongle and headset
Click the dongle 8 time, Hold and press the power button and “M” button to reset the headset and dongle.

BT mode and Dongle Mode

1. Under BT mode, Press and hold “M” to switch to Dongle mode.
2. Under Dongle mode, Press and hold “M” to switch to BT mode.

Dongle Product Parameters

What’s in the package

1. Wireless headset
2. Charging cable
3. Audio cable
4. User manual
5. Usb Dongle

Notes:

1. Use a 5V1A/5V2A charger to charge the headset. Charging the headset with a charging device with a high voltage may damage it.
2. When the headset has not been used for more than 3 months, it is necessary to charge the headset before using it.
3. When not in use for a long time, it is recommended to charge the headset every 3 months, which can more effectively protect the Protect battery usage.
4. It is recommended to use the earphones after they are fully charged.

Attentions:

• Do not place the headset in a high temperature environment, including direct sunlight.
• Do not place the headset near a fire or other overheat-ing environment.
• Do not place the earphones in damp or submerged in liquid, keep the earphones dry.
• Do not attempt to charge the headset by any method other than the supplied charging cable.
• Please pay attention to excessive drops, impacts, scratches or other behaviors that affect the function of the headset, if there is any damage, such as dents, punctures, tear deformation or corrosion, etc., please stop using the headset equipment immediately, and contact the purchaser or Contact us via the contact details on the warranty card.
• If the earphones produce abnormal smell, higher than normal temperature, abnormal changes in color or shape, please stop using the earphones immediately, and contact the merchant you purchased or contact us

Warnings:

• Using headphones at high volume for a long time may cause damage to your hearing.

WARRANTY CARD

Product Model:____ Product Color:____
Purchase Date:____ Purchase Store:____
Purchase Account:____ Reason for Warranty:____
User Name:____ Phone Number:____
User Address:___

Warranty Description

Please keep the warranty card and valid purchase proof properly, show it together when sending the product to repair. If you can’t provide the warranty card or relevant purchase certificate, the calculation date of the product warranty will be based on the product manufacture date.

Warranty Regulations

1. If you have any questions during using, please don’t hesitate to call 4008894883 for help.

2. Within one year from the purchase date, if the product with quality issue and the technical staff of our company has confirmed that the issue occurs under normal use, we will provide free replacement services.

3. In the following cases, our company refuses to provide free warranty service, only provides maintenance services, free of labor costs, only charges for parts:
   A. The product main part has been damaged due to incorrect operation, negligent use or irresistible reasons
   B. The product has been dismantled or repaired without our company authorization
   C. The headphone driver unit has been used at high volume, and the diaphragm is deformed due to debris or impact. The headphone cable is broken, crushed, immersed in water, the case is damaged, deformed, and some other man-made damage reason.
   D. The original warranty card and valid purchase proof can’t be provided, and the purchase date is beyond the warranty period.

4. The free service provided by this warranty card does not include product accessories, and other decorations, gift, etc.

Product Qualification Certificate

After inspection, the product meets the technical standards and is allowed to leave the factory.

Documents / Resources

| Picun PG-01 Wireless Gaming Headset [pdf] User Manual
PG-01 Wireless Gaming Headset, PG-01, Wireless Gaming Headset, Gaming Headset, Headset
---|---

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>