Picun True Wireless Earbuds 36 Hours Playtime, Bluetooth V5.0 Headphones-Complete Features/User Manual

Picun True Wireless Earbuds 36 Hours Playtime, Bluetooth V5.0 Headphones

Specifications

• BRAND : Picun
• EAR PLACEMENT : In Ear
• COLOR : Rose Gold
• CONNECTIVITY TECHNOLOGY : Wireless
• MODEL NAME : Earbuds
• BLUETOOTH VERSION: V5.0+EDR
• WATERPROOF: IPX8
• CHARGING PORT: USB-C Cable
• RANGE: 50ft
• PLAYTIME: 36 hours
• CHARGING TIME: 1-1.5 hour(earbuds) 2hours(case)
• FREQUENCY RANGE: 20-20kHZ
• CHARGING VOLTAGE/CURRENT: DC 5V/ 1-2A

Introduction

W20 Picun Ergonomic painless earbuds design can properly fit and stay firmly in your ears, providing you with the most soothing delight in regular use. Only 4.2g/ 0.14 oz per side relieves fatigue in your ears, and you won’t even notice it’s there during a workout or normal use. (Comes with 3 soft, comfortable ear tips in sizes L, M, and S.) With the latest transmission technology, you’ll have a more reliable, faster, clearer, and unbreakable connection with a range of up to 50 feet. When you open the charging case’s cover, an innovative hall switch will connect your devices (after first time connection.) The 10MM bigger speaker, newest decode technology, and bluetooth V5.0+EDR technology not only provide lossless sound quality and a good balance of bass and pitch, but they also provide a more immersive, clearer, undelayed, and strong bass performance. When jogging, running, or going to the gym, the IPX8 waterproof construction can efficiently resist sweat.

Picun W20 can last for roughly 6 hours on a full charge, with a small charging case providing an additional 30 hours of gaming for a total of 36 hours (at 50 percent volume). With the included USB-C cable, the charging case can be fully charged in under 2 hours. The case and earphones weigh about 50g/1.7 oz, making it easy to carry and store. (Warning: remove the earphones every 2 hours to allow your ears to relax.) You can control volume, play, pause, song switch, phone call, and voice assistant with a simple touch control button and anti-mis operation touch design. It also has twin and single modes, which you can easily choose between.

WHAT’S IN THE BOX

• 1 X Picun W20 Wireless Earbuds
• 1 X USB-C Charging Cable
• 3 X Set of ear tip
• 1 X User Manual

HOW TO PAIR

1. Open the cover of charging case, the earbuds will power on, LED light will twinkle
2. Turn on the bluetooth of your phone, search and click the bluetooth name of “W20”, paired
3. Take off the earbuds and listen music

HOW TO RESET

1. When the earbuds are powered on
2. Tap the touch button 8 times
3. The LED light will show orange and white color, you will hear “Bi…”
4. Restart your phone and pair W”20”

Frequently Asked Questions

• How do you connect your picun wireless earphones to your phone?
  The earphones are quite simple to use. To begin, press and hold the middle button on the earphones until “power on” appears. Then, in “settings,” go to “bluetooth,” seek for “H2,” and double-tap it. Depending on whether you double tap or not, you’ll hear “connected” or “pairing successful.”

• When my wireless headphones are fully charged, how do I know?
  Bluetooth headsets operate in a variety of ways. However, after your headsets are fully charged, the earphones will usually show a light. Red and green are the most prevalent colors used in headsets. A low battery level is indicated by the red light, while a full charge is indicated by the green light.

• How long do picun headphones take to charge?
  If the battery is low, please charge it for 1.5 hours with a USB-C charging cord. When the headphone is charging, it will automatically switch off. When charging, the red LED illuminates, and when fully charged, the red LED illuminates.

• What is the best way to pair picun p26?
  PRESS and HOLD the Play/Pause Button on the right earcup for around 3 seconds until the LED flashes the first time you turn on the headphones. When the headphones are turned on for the first time, they will enter auto-pairing mode, which will be signified by flashing red and blue LEDs.

• Why is it that just one of my Bluetooth earbuds is functioning?
  Depending on your audio settings, headphones may only play in one ear. Check your audio properties to make sure the mono option is disabled. Also, make sure that the voice levels on both earphones are equal.

• Why aren’t my earbuds communicating with one another?
  Your device’s Bluetooth setting should be turned off. When you take the earbuds out of the case, they will immediately switch on. To manually sync the left and right earbuds, double-press both of them at the same time. NOTE: If something doesn’t work the first time, give it another shot.

• How do you get your earbuds to work?
  Pull down the shade from the top of the phone and long-press the Bluetooth symbol on an Android device. It will immediately take you to the Bluetooth menu, where you may switch it on and then search for devices. To pair your headphones, tap the name of the headphones you’re trying to pair.

• How long does it take to charge wireless earbuds?
  The earphones take around 2 hours to fully charge. If the battery is low, charging it in the charging case for 10 to 20 minutes can give you an extra hour of use. Connect the charging case to a USB power source or an approved wall charger.

• Is it possible to charge earbuds without a case?
  Unfortunately, because there is no way to charge the earphones without a case, there is no way to avoid buying a replacement case in these situations. Technically, there have been several third-party products developed in the past that claim to be able to charge AirPods without the case.

• How much battery power do I have?
  Open the Settings app on your phone. See how much charge you have left and how long it will last under “Battery.” Tap Battery for more information.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>