picun ANC-02Pro Active Noise Canceling Headphones User Manual

ANC-02Pro Active Noise Canceling Headphones
User Manual

LED Indicator Light Description

playing
Noise Cancellation Mode| ANC / Transparency Mode On: Green LED on ANC Off: Green LED off
Wireless Mode| Blue LED flashes slowly when music playing, and stays on indefinitely when paused
Incoming Call Status| Blue LED flashes quickly
Charging Indicator| Red LED stays on while in charging, red LED goes out while fully charged

Basic Key Operation
Turn On
Long-press   or for 3 seconds, the headphone will turn on after the blue LED stays on for 3 seconds.
Turn Off
Long press for 3 seconds, the headphone will turn off after the red LED stays on for 3 seconds.
Volume Adjustment
Short press + and to control volume.
Music Selection
Long press + to skip to the next song.
Long press – to skip to the previous song.
Play/Pause/Phone call
Music Pause: Short press   when music playing.
Music Play: Short press when in music pause.
Answer Calls: Short presses when a call comes in.
Hang Up: Short presse   when on a call.
Refuse to Answer: Long press when a call comes in.
When Wireless is connected, a double press   will re-dial the last phone number in your call record.
ANC / Transparency Mode Switch
In any state, long press the ANC On/Off button for 1.5 seconds to activate the ANC function. Then Short press the button to switch to the Transparency mode, again long-press the ANC button for 1.5 seconds to turn off the ANC function.
Voice Call ENC Function
The headphone will automatically activate the ENC (Environmental Noise Cancellation) function during a phone call, and filter out the environmental noises.

Wireless Connection

After the headphone turns on, it will enter into Wireless pairing mode automatically—ly, and the red and blue LED will twinkle alternately. Turn on the Wireless on your cell phone and search “ANC-02Pro”, click to connect. The blue LED will stay on indefinitely after connecting successfully, the blue LED will flash slowly when music plays.
Language Switch
Turn on the headphone and don’t connect it with any devices, double click +, or switch language between Chinese and English.
Charging Mode
When in a low battery, please charge it for around 3 hours with a USB charging cable. The headphones will be turned off automatically while charging. Red LED stays on indefinitely while in charging, and red LED goes out while fully charged.
Power Status
When the headphone is connected to the IOS device, the headphone’s current power status will be shown on the upper right corner of the device screen. When the battery is low, it will prompt “battery low”.

Appearance wireframe

Connect 2 devices at the same time

1. When the headphone is off, long-press the On/Off button for 3 seconds to power on and enter the pairing status, and connect It with the first device.
2. Turn off the Bluetooth on your first device, let the headphone be in pairing status to connect the second device.
3. Turn on the Bluetooth of the first device, and connect the headphone manually.
   Note: After the headphone is turned off and then turned on, it will reconnect the two devices at the same time.

Line-in Mode

• In the power-on state: plug in the audio cable, the headphone will automatically turn off, and you can listen to music on the audio cable.
• In the power-off state: plug in the audio cable, the headphone can’t be turned on, and you can only listen to the music on the audio cable.

Note:

• The ANC function can be used normally in LINE_IN mode.
• If you want to use Bluetooth, you need to unplug the audio cable and turn the headphone on.

Packing List

1. Wireless Headphone
2. User Manual
3. Charging Cable
4. Audio Cable
5. Storage Box

Parameters Information

Warm Tips

1. Please charge the headphone with a 5V 1A / 5V 2A charger, high voltage the headphone.
2. When the headphone has not been used for more than 3 months, it is charged before use.
3. When the headphone has not been used for a long time, we suggest you 3 months to provide good protection for the battery.

Attentions

1. Please keep or use the headphone at normal temperature, avoid direct sunlight.
2. Please keep the headphone away from fire or other hot objects.
3. Please keep the headphone away from damp places or submerged in liquid, keep dry.
4. Please don’t try to use other methods of charging other than the USB charging cable we provide.
5. Please don’t disassemble, repair, or modify.
6. Please pay attention to excessive clash if any damage (like dents, deformation, corrosion, etc.), please turn to us for assistance by the contact information on the warranty card.
7. If the headphone produces an abnormal smell, higher than normal temperature, color, or shape changes abnormally, please stop using them and turn to us for assistance by the contact information on the warranty card.

Warning

1.  If the battery is replaced improperly, there is a danger of explosion. It can only be replaced with a battery of the same type or equivalent. The battery (battery pack or assembled battery) must not be exposed to the conditions such as sunlight, fire, or a similar overheating environment.
2. The device should not be exposed to water droplets or water splashes. It should not be placed in objects such as vases or similar objects filled with liquids.
3. This device is not a children’s toy. Children under the age of 14 need to be accompanied by parents to use.
4. Using headphones for a long time at a high volume may cause damage to your hearing.

WARRANTY CARD

Product Model:……………………………..
Product Color:…………………………….
Purchase Date:……………………..
Purchase Store:………………………….
Purchase Account:………………………..
Reason for Warranty:……………………………….
User Name:…………………………
Phone Number:……………………………..
User Address:…………………………..
Warranty Description
Please keep the warranty card and valid purchase proof properly, show it together when sending the product to repair. if you can’t provide the warranty card or relevant purchase certificate, the calculation date of the product warranty will be based on the product manufacture date.
Warranty Regulations

1. if you have any questions during use, please don’t hesitate to call 4008894883 for help.

2. Within one year from the purchase date, If the product with quality Issue and the technical staff of our company has confirmed that the Issue occurs under normal use, we will provide tree replacement services.

3. In the following cases, our company refuses to provide free warranty service, only provides maintenance services, free of labor costs, only charges for parts:
   A. The product’s main part has been damaged due to incorrect operation, negligent use, or irresistible reasons
   B. The product has been dismantled or repaired without our company’s authorization
   C. The headphone driver unit has been used at a high volume, and the diaphragm is deformed due to debris or Impact. The headphone cable is broken, crushed, immersed in water, the case is damaged, deformed, and some other man-made damage reason.
   D. The original warranty card and valid purchase proof can’t be provided, and the purchase date is beyond the warranty period.

4. The free service provided by this warranty card does not include product accessories, other decorations, gifts, etc.

Product Qualification Certificate
After inspection, the product meets the technical standards and is allowed to leave the factory.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>