picun B12 Wireless Headphone User Manual

B12 Wireless Headphone
User Manual

FUNCTION

Blue LED flash slowly in music playing
TF Mode| Green LED stay on Indefinitely when parsing,
Green LED flash slowly in music playing
Standby Mode| Blue LED stays an Indefinitely
Incoming Call Status| Blue LED flash quickly
Low Battery Status| Red LED flash quickly
Charging Status| Red LED tight co in charging. red LED goes off While fully charged

Basic Key Operation

Turn On
Press for 3 LED lights on for the headphone will be turned on after blue 3 seconds
Turn Off
Press for 3 LED lights on for seconds, the headphone will be turned off after red 3 seconds

Button Instructions

Mode Conversion

• The headphone will automatically switch to TF mode when inserting the TF card
• The headphone will automatically switch to Bluetooth mode when pulling out the TF card
• After inserting the TF card, you can switch to Bluetooth mode by single pressing M . press repeatedly to switch between TF mode and Bluetooth mode.

Volume Adjustment
Short press ∧ and V to Control volume.
Music Selection

• Long press ∧ for skipping to the next song.
• Long press V for skipping to the previous song.

Play/Pause/Phone call

• Music Play: Short press
• Music Pause: Short press
• Answer Calls: Short press when a call comes in
• Hang Up: Short press when finished a call
• Refuse to Answer: Long press when a call comes in
• Double press when Bluet00th Connected, will re-dial the last phone number in your call record

MODE DESCRIPTION

Turn On/Off Decoration Light
You can turn on/off the decoration light by long pressing “Vol.’ and Woks for 6 seconds after the headphones are turned on
Headphone Turn On Mode
A long press turns on the key for 3 seconds. the headphone will be turned on and automatically enter into Bluetooth made. It will search 10 pairs or reconnect to the last successfully Connected cell phone_ Also the decoration light will be lit on.
Bluetooth Mode
Without inserting the TF card, the long press turns on the key for 3 seconds, the headphone will be turned on and enter into Bluetooth mode, red and blue LED twinkle alternately. Turn on the Bluetooth function on your cell phone. and search 1312″, click to connect. Alter connect successfully, blue LED stay on indefinitely, and when in music playing, blue LED flash slowly
TF Mode
Play Long press turn on key for 3 seconds, if insert the TF card, it will play the music in the TF card. You can adjust the volume by short pressing ∧ and V . Long pressing ∧ and V can switch to the previous or next song. You can pause or play music by short pressing You can switch between Bluetooth mode and TF mode by short pressing M Language Switch After the headphones are turned on without pairing any device, press twice: n a row to switch language between Chinese and Engish.

OTHER FUNCTIONS

Charging Mode
New headphones come with power and support several times usage. When on low battery. pis charge it for around 3 hours with US8 charging cable The headphones will turn off automatically when in charging. The Red LED light is on in charging and will go off while fully charged.
Power Status
When the headphones are connected to the IOS device, the current power status of the headphone will be shown in the upper right corner Of the device screen. When the headphone In a low battery, it will prompt battery low”, and also rec LED flash quickly
Line-in Mode

1. Turn on Status. plugin audio cable. the headphone turns off, and you can listen to the music with the audio cable
2. Turn off status: plugin audio cable, the headphone can’t be turned on, you can only listen to the music with the audio cable

Note. If you want to listen to the songs in the Bluotooth or ‘IF card. your need to unplug the audio cable and turn it on to use

SPECIFICATIONS

Packing list

1. Bluetooth Headphones
2. User Manual
3. USB Charging Cable
4. Certification

Warm Tips

1. Please charge the headphone with a 5V 1Acharger, high voltage may damage the headphone.
2. When the headphone has not been used for more than 3 months. it needs to be charged before use.
3. When the headphone has not been used for a long time. we suggest you charge every 3 months to provide good protection for the battery.

PRECAUTIONS

Attentions

1. Please keep or use the headphone at normal temperature, and avoid direct sunlight.
2. Please keep the headphone away from fire or another hot object
3. Please keep the headphone away from a damp place or submerged in liquid, keep dry.
4. Please don’t try to use another method for charging other than the USB charging cable we provide
5. Please don’t disassemble, repair or modify.
6. Please pay attention to excessive clash, if any damage (like dents, deformation, corrosion, etc.), please turn to us for help.
7. If the headphone produces an abnormal smell, higher than normal temperature, color or shape changes abnormally, please stop to use and turn to us for help.

Warning

1. There is a danger Of explosion if you replace the battery in an improper way. 11 can only be replaced with a battery of the same type or equivalent. The battery (battery pack or assembled battery) crust rot is exposed to the conditions such as sunlight, fire or smears overheating environment.
2. The device should not suffer from water droplets or water splashes, and also sheik, not be placed in vases or tender objects filled with boulders
3. This product does not belong to children’s toys. Children under the age of 14 need to be accompanied by their parents to use
4. Using a headset at high volume ‘or for long periods of time may cause damage to your hearing

WARRANTY CARD

Product Qualification Certificate
After inspection, the product meets the technical standards and is allowed to leave the factory.

FCC Warning

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

The device has been evaluated to meet general RF exposure requirements. The device can be used in portable exposure conditions without restriction.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>