Bowers and Wilkins Pi6 True Wireless Earbuds User Guide
- August 29, 2024
- Bowers and Wilkins
Table of Contents
Bowers and Wilkins Pi6 True Wireless Earbuds
Product Specifications
- Brand: Bowers & Wilkins
- Model: Pi6
- Features: Noise Cancelling, Voice Assistant, Customizable Controls
- Compatibility: Works with Bowers & Wilkins Music app
- Charging: Via supplied USB cable and charging case
Product Usage Instructions
Setup
Download the Bowers & Wilkins Music app from here to set up and control your earbuds.
Device Pairing
To pair your device:
- Open the charging case to power on the earbuds.
- The light will flash blue to indicate pairing mode is active and turn solid blue when pairing is successful.
- Tap & hold both buds for 3 seconds to pair additional devices.
Fitting
Try different tip sizes to ensure a good seal for the best audio performance.
For optimum call quality, ensure the Bowers & Wilkins logo is in line with
your mouth.
Controls
To control playback and calls:
- Tap either earbud.
- Left earbud for Noise Cancelling / Pass-Through.
- Right earbud for Voice Assistant.
- Customize tap & hold behavior in the Bowers & Wilkins Music app.
Charging
Place your earbuds in the case to charge them. Use the supplied USB cable to
charge your Pi6.
Frequently Asked Questions (FAQ)
Q: How do I reset my Pi6 earbuds?
A: To reset the earbuds, place them in the charging case and keep the lid
open for 10 seconds. Close the lid, wait for a few seconds, then open it again
to restart the pairing process.
Q: Can I use only one earbud at a time?
A: Yes, you can use either the left or right earbud independently for
mono audio playback or calls.
Setup
Download the Bowers & Wilkins Music app to set up and control your earbuds.
www.bowerswilkins.com/bowers-wilkins-music-app
Device Pairing
Open the charging case to power on the earbuds.
The light will flash blue to indicate pairing mode is active and turn solid blue when pairing is successful.
Tap & hold both buds for 3 seconds to pair additional devices.
Controls
Tap either earbud to control playback and calls.
L: Noise Cancelling/ Pass-Through
R: Voice Assistant
Customise tap & hold behaviour in the Bowers & Wilkins Music app.
Charging
Place your earbuds in the case to charge them.
Use the supplied USB cable to charge your Pi6.
- Setup Download the Bowers & Wilkins app Music to configure and control your headphones.
- Device pairing Open the charging case to power on the earbuds. The LED flashes blue to indicate that pairing mode is active and turns solid blue when pairing is successful. Touch and hold both earbuds for 3 seconds to pair other devices.
- Adjustment Try different tip sizes to ensure a good seal for better audio performance. For optimal call quality, the Bowers & Wilkins logo should be aligned with your mouth.
- Orders Tap either earbud to control playback and calls. L: Noise Reduction / Transparent R: Voice Assistant Customize held touch behavior in the Bowers & Wilkins Music app.
Loading
Place your headphones in the case to charge them. Use the included USB cable
to charge your Pi6.
Apple
Follow the in-app instructions to pair with your Apple® device.
II16810/ 04
The Bluetooth® word mark and logos are registered trademarks owned by
Bluetooth SIG, Inc. and any use of such marks by B&W Group Ltd. is under
license. Apple, iPhone, and the Apple logo are trademarks of Apple Inc.,
registered in the U.S. and other countries and regions. The trademark “iPhone”
is used in Japan with a license from Aiphone K.K. App Store is a service mark
of Apple Inc., registered in the U.S. and other countries. Android and Google
Play are trademarks of Google LLC. Other trademarks and trade names are those
of their respective owners.