TigerTough E0822019 Single Seat Cover User Manual
- August 29, 2024
- TigerTough
Table of Contents
**TigerTough E0822019 Single Seat Cover User Manual
**
Hey there!
It’s not rocket science, but following the instructions will make installing your seat covers a lot easier. We promise.
If you have any questions, comments, or issues, we’re here to help! You can reach us at 507.246.3545 (call or text) or email orders@tigertough.com.
LIFETIME WARRANTY
Basically, you break it, we buy it. Seriously
Your new seat covers are covered by an unconditional, no B.S. warranty. That means that if you manage to abuse them to a point that they can’t perform like they’re supposed to, we’ll make it right. Depending on what is more practical, we’ll either repair or replace the damaged cover.
This warranty only applies to the original purchaser.
General care instructions
- In most cases dirt, debris, spills and pet hair can be removed by wiping with a damp cloth.
- Seat covers can be removed and machine washed on low temperature setting using mild detergent. Drip dry or machine tumble dry on a no heat cycle. Straps should be coiled and secured with rubber bands for machine washing and drying.
- Soil may be removed with spray cleaner or detergent and water.
- Oil or grease stains should first be treated with a dry cleaning solvent followed by a spray cleaner or detergent and water.
- Do not use bleach.
Install Cover
Undo the velcro tabs on the seat cover.
Begin pulling the cover on with the pocket facing the back.
Work the cover down the seat back. Pull around the gray knob on the side and tuck the seam in around it.
Fasten tabs under the headrest to the velcro on the edge og the cover as show.
Push the tabs in between the seat back and seat bottom.
[View from back of seat]
Pull tight and secure to the velcro at the back.
Fasten the tab beneath the headrest to the velcro on the inside of the cover.
Place the seat bottom cover over the seat bottom.
Tuck fabric around the plastic trim of the adjustment handle at the front.
Push flap in between the seat back and seat bottom.
Pull tight and secure velcro.
Undo the velcro tabs on the seat cover.
Begin pulling the cover on with the pocket facing the back.
Work the cover down the seat back. Pull around the gray knob on the side and tuck the seam in around it.
[View from back of seat]
Pull tight and secure to the velcro at the back.
MISSION ACCOMPLISHED