SQ9 Mini DV Camera User Manual

: June 12, 2024
: Mini DV

Table of Contents

SQ9 Mini DV Camera
Operation instruction SQ9
Specification
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)

SQ9 Mini DV Camera

USER MANUAL

Operation instruction SQ9

Attention! Before first use, fully charge the battery mini camcorder!
This mini camcorder has a built-in lithium-ion battery. You can charge one of the following methods:

Connect the camcorder to the mini USB port on your PC, after stopping the recording.
Connect the mini camera to the battery charger from the 220V or portable charger 5V. In this case, you can continue to use minikameru in the charging process. During charging, the blue and red LEDs will light continuously. If only blue color, press the «Mode» button.

When charging mini camera may feel warm. At work the heating chamber is not affected.

If the built-in battery is low, or free space on the memory card is not enough to continue, the blue and red LED mini video camera will blink at the same time for 5 seconds, after which a mini camcorder saves the recorded video and automatically turns off.
If the memory card is not inserted, the blue and red LED mini recorder will blink at the same time for 5 seconds, after which the mini camera will automatically turn off.
If the camcorder is in standby, and passes without any action mode, it automatically turns off after 1 minute to save the internal battery.

Manual recording with a resolution of 1280X720

Hold «On / Off» button for 3 seconds. to include a mini camera – lights up blue LED – mini camcorder is in movie recording standby mode with 720p quality. Press the «On / Off» button once (without delay) to start recording the video – the blue LED will blink 3 times and go out – being with 720p video recording quality. The video is automatically saved every 3 minutes. press the «On / Off» button to stop recording.

Manual recording with a resolution of 1920X1080

Hold «On / Off» button for 3 seconds. to include a mini camera – a blue LED will light continuously. Press once on the «Mode» button to switch to video capture mode with a resolution of 1080p – red and blue LED will illuminate at the same time, a mini video camera is in recording standby mode to 1080p quality. To start shooting, press the «On / Off» button once – the blue LED goes off and the red LED will blink 3 times and go out – being with 1080p video recording quality. The video is automatically saved every 5 minutes. press the «On / Off» button to stop recording.

Recording motion sensor

For this, while in 720p recording standby or 1080p video, press and hold the «Mode» button mini camcorder for about 3 seconds – micro camcorder will go into record mode on the motion sensor. When motion is detected the video starts automatically, and the red and blue LEDs will blink simultaneously. When recording motion sensor video is automatically saved every 5 minutes.

Recording with night illumination

Press the «On / Off» button to turn on the portable camera. Press and hold the «On / Off» button for 2 seconds – the red LED will flash twice – the night light is on. To deactivate night illumination, press and hold the «On / Off» button for 2 seconds, the red LED will blink three times – the night light is switched off.

Press the «On / Off» button to turn on the spy camera – lights up blue LED. Double-click the «Mode» button to switch to photographing mode – red LED will light continuously. To take a picture, click once «On / Off» button – the red LED will blink once, the photo was saved. The resolution received photos – 4032×3024.

Connect the mini camera off the PC – after a few seconds, it is automatically detected as a removable drive on your PC. The blue LED will indicate the information transfer process, and red – the process of charging the internal battery.

To SQ9 mini camcorder is defined as a web camera, turn it on, tighten and hold the mode, at the same time connecting the USB cable.

Mini camera will be defined as a standard webcam in the «My Computer».

If the mini camcorder is not working properly, or does not respond to button presses, you can restart it by pressing and holding for 3 seconds «On / Off» button and «Mode» mini camera.

To turn off the mini video camera, press and hold the «On / Off» button for 5 seconds. If the mini camcorder is in standby mode and is not used, it automatically turns off after 1 minute.

New Version SQ8 SQ9 Mini Camera 1080P 720P