TigerTough W0626001 Bucket Seat Covers Installation Guide
- August 28, 2024
- TigerTough
Table of Contents
W0626001 Bucket Seat Covers
“`html
Product Information
Specifications
- Part Number: W0626001
- Product Type: Bucket Seat Covers
- Pieces Included:
- (1) Driver Back
- (1) Driver Bottom
- (1) Passenger Back
- (1) Passenger Bottom
- (2) Stringlocks
- (2) Armrests
Product Usage Instructions
General Care Instructions
-
In most cases, dirt, debris, spills, and pet hair can be
removed by wiping with a damp cloth. -
Seat covers can be removed and machine washed on a
low-temperature setting using mild detergent. Drip dry or machine
tumble dry on a no-heat cycle. Straps should be coiled and secured
with rubber bands for machine washing and drying. -
Soil may be removed with a spray cleaner or detergent and
water. -
Oil or grease stains should first be treated with a dry
cleaning solvent followed by a spray cleaner or detergent and
water. -
Do not use bleach.
Important: Airbag Compatibility
Your seat has seat side airbags. To ensure maximum safety, do
not restrict these airbags. The cover includes a tearaway flap
(stitched with white thread) for airbag deployment. Make sure this
flap and the orange TigerTough tag are facing the door.
Installation Instructions
1 – Preparation
1.1 – Slide the seat forward and raise it to the highest
position if possible.
2 – Install Seat Back Cover
-
Turn the seat back cover 3/4 of the way inside out and pull it
over the seat back. -
Continue pulling the cover down over the seat, unrolling it as
you go. -
Push the front flap between the seat back and seat bottom.
-
Pull the front flap tight and fasten it to the Velcro on the
seat back.
THE STRINGLOCK
-
Run one string through the channel on the end of the
StringLock. -
Pull the string tight, pulling the StringLock towards one edge
of the seat. Press the string into the clamp, locking it in
place. -
Run the second string through the StringLock just like the
other one. -
Pull the loose end of the second string until everything is
tight and lock it into place as well.
Watch the video at ttcovers.com/stringlock
FAQ
Q: What is covered under the warranty?
A: Your new seat covers are covered by a two-year,
unconditional, no B.S. warranty. This warranty covers damage that
prevents the covers from performing as intended within two years of
purchase. Depending on practicality, damaged covers will be
repaired or replaced.
Q: How can I contact customer support?
A: For any questions, comments, or issues, you can reach
customer support at 507.246.3545 (call or text) or email
orders@tigertough.com.
“`
Hey there!
It’s not rocket science, but following the instructions will make installing
your seat covers a lot easier. We promise.
If you have any questions, comments, or issues, we’re here to help! You can
reach us at 507.246.3545 (call or text) or email orders@tigertough.com.
PART NUMBER W0626001 PRODUCT TYPE BUCKET SEAT COVERS
PIECES (1) DRIVER BACK (1) DRIVER BOTTOM (1) PASSENGER BACK (1) PASSENGER
BOTTOM (2) STRINGLOCKS (2) ARMRESTS
Basically, you break it, we buy it. Seriously.
Your new seat covers are covered by a two-year, unconditional, no B.S.
warranty.
That means that if you manage to abuse them to a point that they can’t perform
like they’re supposed to within two years of when you bought them, we’ll make
it right. Depending on what is more practical, we’ll either repair or replace
the damaged cover.
General care instructions:
1. In most cases dirt, debris, spills and pet hair can be removed by wiping
with a damp cloth.
2. Seat covers can be removed and machine washed on low temperature setting
using mild detergent. Drip dry or machine tumble dry on a no heat cycle.
Straps should be coiled and secured with rubber bands for machine washing and
drying.
3. Soil may be removed with spray cleaner or detergent and water.
4. Oil or grease stains should first be treated with a dry cleaning solvent
followed by a spray cleaner or detergent and water.
5. Do not use bleach.
IMPORTANT: AIRBAG COMPATABILITY
YOUR SEAT HAS SEAT SIDE AIRBAGS. For maximum safety in the event of a crash,
these airbags MUST NOT be restricted.
Your cover has been engineered with a tearaway flap (stitched with white
thread) that will allow the airbag to deploy. Ensure that this flap & the
orange TigerTough tag are facing the door.
TigerTough is not responsable for any issues resulting from incorrectly
installed seat covers.
1 – Preparation
q 1.1 – Slide seat forward and raise to highest position, if possible.
2 – Install Seat Back Cover
q 2.1 – Turn seat back cover 3/4 of the way inside out and pull over seat
back. q 2.2 – Continue pulling the cover down over the seat, unrolling it as
you go. q 2.3 – Push front flap between seat back and seat bottom. q 2.4 –
Pull front flap tight and fasten to Velcro on seat back.
3 – Install Seat Bottom Cover
q 3.1 – Put cover over seat bottom. q 3.2 – Velcro side flaps to factory
upholstery on rear of seat bottom. q 3.3 – Pull strings tight. q 3.4 – Secure
strings with StringLock. See next page for StringLock instructions. q 3.5 –
Push top flap between seat back and seat bottom. q 3.6 – Run front flap over
seat adjustment lever, wires, and brackets. q 3.7 – Pull front flap tight and
fasten to Velcro on top flap.
THE STRINGLOCK
1Run one string through the channel on the end of the StringLock.
2Pull the string tight, pulling the StringLock towards one edge of the seat.
Press the string into the clamp, locking it in place.
3Run the second string through the StringLock just like the other one.
4Pull the loose end of the second string until everthing is tight and lock it
into place as well.
Watch the video ttcovers.com/stringlock
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>