AVer MD720UIS All In One PTZ Camera User Guide

: August 28, 2024
: AVer

AVer MD720UIS All In One PTZ Camera

USER GUIDE

MODEL: MD720UIS

Package Contents

Optional Accessories

*For detail on optional accessories, consult your local dealer.

User Manual and Software:

www.aver.com/download/MD720UIS

Warranty Policy:

communication.aver.com/warranty

AVer Information Inc. offers a 3-year parts and labor warranty for the MD Series and a 1-year warranty for accessories.

AVer Limited Warranty may vary in different countries. Please check with your local agents or resellers for details.

Overview

Front View

1. Privacy Indicator
2. Infrared Night Vision LED
3. Microphone Array
4. Voice Command Indicator
5. Status Indicator
6. IR Remote Control Sensor
7. Speaker

Side View

8. USB 3.0 Type-A Port
9. USB 3.0 Type-C Port

Back View

10. Kensington Lock
11. DC 12V Power Jack
12. USB 3.0 Type-C Port
13. HDMI Out
14. HDMI In
15. Audio In
16. Line Out
17. Wi-Fi Dongle
18. Ethernet Port
19. PoE++ Port

LED Indicators

Privacy Indicator

Color	Status
Solid purple	Monitoring
No light	Privacy mode / power off

Voice Command Indicator

Color	Status
Solid lake blue	Standby
Slow flashing lake blue	Waiting to receive voice control
Quick flashing lake blue	Perform voice control

Status Indicator

Color	Status
Flashing orange	Initializing
Solid purple	Normal
Solid blue	Standby
Flashing blue	Tracking ON
Solid orange	Privacy mode
Flashing purple	Firmware updating
No light	Power off

Dimensions

Connections

Cable Fixing Plate Installation

1. Secure the cable fixing plate using the included M2 x 4mm screws.
2. Plug in the cables.
3. Secure the cables and the cable fixing plate with cable ties.

Remote Control Model HB9265

*The Voice Control function is now only available in the United States.

Specifications

Model: MD720UIS
Warranty: 3-year parts and labor warranty for the MD Series, 1-year warranty for accessories
Power: DC 12V
Connectivity: Wi-Fi, Ethernet, USB 3.0 Type-A, USB 3.0 Type-C, HDMI In/Out
Dimensions: Refer to user manual for detailed dimensions

FCC Compliance Statement

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures:

Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.

FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate this equipment.

FCC Radiation Exposure statement

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.

Warning:

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.

Warning:

This Class B digital apparatus complies with Canadian ICES-003. Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada.

Remote Control Battery Safety Information:

– Store batteries in a cool and dry place.
– Do not throw away used batteries in the trash. Properly dispose of used batteries through specially approved disposal methods.
– Remove the batteries if they are not in use for long periods of time. Battery leakage and corrosion can damage the remote control. Dispose of batteries safely and through approved disposal methods.
– Do not use old batteries with new batteries.
– Do not mix and use different types of batteries: alkaline, standard (carbon- zinc) or rechargeable (nickel-cadmium).
– Do not dispose of batteries in a fire.
– Do not attempt to short-circuit the battery terminals.

PSTI Statement of Compliance

Please refer to the following website: https://www.aver.com/product-security- advisory

PoE

The PoE++ port is connected only to PoE networks without routing to the outside plant.

COPYRIGHT

The information contained in this documentation is subject to change without notice.

Contact Information

Headquarters
AVer Information Inc.
8F, No.157, Da-An Rd.
Tucheng Dist., New Taipei City
Taiwan
Tel: +886 (2) 2269 8535

USA Branch Office
AVer Information Inc., Americas
44061 Nobel Dr
ive , Fremont, CA
94538, USA
Tel: +1 (408) 263 3828
Toll-free: +1 (877) 528 7824

Europe Branch Office
AVer Information Europe B.V.
Westblaak 134, 3012KM,
Rotterdam, The Netherlands
Tel: +31 (0) 10 7600 550

FAQ

Q: Where can I find the user manual and software?

A: You can download the user manual and software from www.aver.com/download/MD720UIS.

Q: What is the warranty policy for the MD720UIS?

A: AVer Information Inc. offers a 3-year parts and labor warranty for the MD Series and a 1-year warranty for accessories.
Warranty terms may vary by country.

Q: What do the LED indicators signify?

A: The Privacy Indicator shows privacy mode or power-off status, while the Status Indicator indicates various states like initializing, normal operation, standby, etc.

Q: How do I use the Voice Control function?

A: Press the Voice Control button on the remote to activate voice command reception. Note that this function is currently available only in the United States.