D-Link DEM-436XT-BXD SFP Transceiver Installation Guide
- August 28, 2024
- D-Link
Table of Contents
D-Link DEM-436XT-BXD SFP Transceiver
Specifications:
- Product Name: DEM-436XT-BXD 10GBase-BX-D Single-Mode WDM SFP+ transceiver
- Transmission Distance: Up to 40 km (Tx: 1330 nm, Rx: 1270 nm)
- Wavelength: Tx 1330 nm, Rx 1270 nm
- Interface: SFP+
- Supported Standards: 10GBase-BX-D
Product Usage Instructions:
1. Connecting the Transceiver:
Plug the DEM-436XT-BXU / DEM-436XT-BXD transceiver into the SFP+ port of your switch. Connect a fiber cable to the transceiver to link your switch to fiber media.
2. Hot Plugging:
The DEM-436XT-BXU / DEM-436XT-BXD transceiver supports hot plugging. You can connect or disconnect the transceiver while the system is powered on without disrupting network operations.
FAQ:
Q: Are the DEM-436-BXU/40KM and DEM-436-BXD/40KM transceivers interchangeable?
A: No, the DEM-436-BXU/40KM and DEM-436-BXD/40KM transceivers are used in pairs and are not interchangeable.
Q: Can I use the DEM-436XT-BXD/20KM transceiver for distances greater than 20 km?
A: No, the DEM-436XT-BXD/20KM transceiver is designed for distances up to 20 km. For longer distances, consider using the DEM-436XT-BXD/40KM transceiver.
Q: How do I contact support for D-Link products?
A: You can contact D-Link support by phone at 8-800-700-5465 or visit their website at http://www.dlink.ru. You can also reach them via email at support@dlink.ru.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>